krysted9354

HELLO<

my name is kris, im 16 years old and 10th grade, this is my first car 1994 honda civic, my grandfather bought it STOCK ORIGINAL, and as he had it i did a few things to it knowing it will be my car sooner or later, i have been working on it even tho i dont get my license till end of july {THIS MONTH}

Im not rich or anything just making money were ever i can
{ grandfather own honda/acura shop so i help}

I HAVE DONE EVERYTHING ON MY CAR ON MY OWN SWAP,PAINT ETC !! SO ITS NOT THE BEST BUT IT WILL DO !~

ENOUGH TALKING MORE SPECS EHH?

94 civic VX eg hatchback
mint body no rust, goodpaint job but some sanding marks.

ENGINE: D16a6 block p29 pistons ,ls rods,all new honda oem.
D16z6 head, ported and polished,skunk2 v-train.
IM/TB matched ported,tb spacer,450cc injectors,chipped socketed p28,z6 lsd tranny,all poly motor mounts,+ much more coming

suspension: all sotck vx except, tokico blues,tein coilovers,gsr sway bar rear,gsr front strut bar,type-r trunk bar,ebay bars,rear lower tie,new poly bushings,blox rear arms,+much more

interior: delsol seats,pillar gauges{GLOW SHIFT {: ,gsr shifter,carbon cluster,momo steering wheel,carbon fiber passnager air bag delete,arm rest,+much more

exterior: mostly stock,tpye r lip,fogs,lights etc

wheels: vx wheels for winter
steeleies with nittos for racing at track
mugen mr-5 with falkens for daily driving

right now im in progress of installing my t25 turbo kit< will tune on my own on chrome {: + red oing it to my new standards before i get license and tuning it {P

she sat like this 1 week ago or so:










heres some thing coming up:

JUST DID STEERING WHEEL 1 hour ago:



heres some future things and what going on now {:

OMG THE GOGGLES

iTrader: (7)

Interested to see how this goes, but please, do not put that gawdy fake mugen decal on the side of the car. Put it in the recycling bin where it belongs. I always get a kick out of people who not only put the fake mugen decal on their car, but that they don't have any mugen parts on there anyways LoL

krysted9354

HOPEFULLY NOT STOLEN !!!

but i have many good security devices, and other stuff shhh,

lol, yeah

im hoping to finish the inside of car tumarow heres what i have and am doing nothing but inside till im done !

:turbo timer
:boost gauge swap with vacuum
:clean/vacuum
:rear bar install
:install pins for rear seats
:fix taillights bulbs
:passnager air bag delete
:finish changing place of ecu and led's.
:ADD BIG BUTTONG FOR VTECH LOL LOL
:setup po po radar

and that will be it with interior i believe , for now hehe

please comment on what u think, and yes the projectors gone and ne wlights as pictures {:

and exhaust is my own cutom 3" DP and 2.5" exhaust with resonator and thats it {: turbo will quiet down enough .

THE BULL

nice little build for a 16 year old good luck with it man

krysted9354

THANKS,

u guys have any sugjestions ?

krysted9354

planning on painting my vx wheels white, any think i should look out for liek which paint to use ? and should i strip oriignal or just prime and sand ?

hester_b

for a long lasting paint job that will hold up take all the old paint and primer off then reprime and paint

toyomatt84

iTrader: (1)

If those seatbelts don't pass FIA regulation (aka. if they're from eBay), ditch them. Paint your drum brakes black, and get some ball seat lug nuts for your OEM wheels (conical seat lugnuts do not seat properly, and are unsafe).

speckles

wait, HIGH CP AND BOOST?! not a good idea kiddo. that screams big bang all over it. you can only have 1, high compression, OR boost. unless you make it a diesel its NOT going to happen. but looks good so far!

krysted9354

yeah i have new mugen lugs for my other whhels, also those were free belt so i took them {;

krysted9354

Dude i have done research and its just high 9:8:1 not that high but higher then stock z6 , it will be fine i will have it tuned professioanally {:

only up to 10psi just want 180whp for daily {:

krysted9354

heres how i finished my air bag tray < few minutes ago {:







i bolted trunk bar in, is it froma type r ?

SHG_James

subscribed

hamizle

amazing job, man when i was 16 i only had a intake and exhaust in my civic lol, those d series can be nasty with less money then a b series, people neglect but i just couldn't stand how slow it was until i hit boost they are fun good luck with the car you are a great builder to be

Meighty7

Have you dynod the motor the way it is too see what you are at right now?

jdmdc2boi12

good build.. keep it up kid

tunerkid7

not bad, not feelin the drums or valve cover though, in for more

Dc4 addict.

Not bad of a build for a 16 yr old! Keep up the work & make it cleaner.

queda

nice. goodluck with the build. i like the direction your going in

krysted9354

DRIMS ARE GETTING OUT !! **** THOSe have gsr disc {:

and valve cover and all brakes re painted gold or red DARK, or grey ??

and motor should be at 132hp but rev sop ****ing fast and high !! makes power to 7,980rpm !!, compression at 1,000 miles is 210 ACROSS the board, so its broken in,


going to do my suspension right now {:, any sugjestions on how to unbolt the lca bolts ?

krysted9354

http://www.youtube.com/watch?v=8g7EV...e=channel_page

norf_norf

haha nice. first time i've seen a video update. looks straight though. thank GOD you got some OEM lights those other ones were weak.

krysted9354

hahah yeah, i decided these new lights with the city light option will be good for my all led headlight project {:

and yesh video update here and there,


just please SOMEONE TELL ME HOW TO safely un do the rear lca's bolt without braking it ?

krysted9354

any color sugjestions ?

and anyone have good taillight for hatchback 4-sale ?

speckles

ok phew, i was thinking more in the 10:1 and up lol. Good thing you read up on your stuff!