Na-spirit 94 integra build
#377
Re: My teg build, i suck at cars by the way..soo help out?
hell yea. fellow teg owner and sw388 owner! best combo in the honda world imo... but im a bit biasis. lol looks awesome man.
#378
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: Antarctica
Posts: 988
Likes: 0
Received 0 Likes
on
0 Posts
Re: My teg build, i suck at cars by the way..soo help out?
Thanks a lot guys!.. Car should be running next month I hope, almost there... Going to order my mfactory lsd soon. Then I can finally install the motor.
Picked up some rays valve stem caps seeing my wheels came with blue ones...no offense to color on wheels, I'm just bland.
.Personal hub adapter.
Picked up some rays valve stem caps seeing my wheels came with blue ones...no offense to color on wheels, I'm just bland.
.Personal hub adapter.
#380
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: Antarctica
Posts: 988
Likes: 0
Received 0 Likes
on
0 Posts
Re: My teg build, i suck at cars by the way..soo help out?
Miss seeing your integra Brice.. nice pic, although my car was *** then, will be a monster I hope this time out. Handling and power.
Just ordered my Mfactory LSD, Will have pics of the install soon. Then the motor goes in.
Just ordered my Mfactory LSD, Will have pics of the install soon. Then the motor goes in.
#381
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: Antarctica
Posts: 988
Likes: 0
Received 0 Likes
on
0 Posts
Re: My teg build, i suck at cars by the way..soo help out?
Current setup
Exterior
01 Front bumper
01 Rear bumper
01 Headlights/bumper lenses *smoked*
01 Mud flaps
01 Integra Type R front lip *OEM*
Soon.. JDM 01 Integra tail lights
Integra type R rear spoiler
Body work done at caliber collision
Painted Factory Frost white.
Shaved moldings for that "Integra type R" look.
Interior
Gutted..
Personal 330 grinata Steering wheel, *suede with red stich*
Personal Hub.
Buddy club seat/brackets (red)
Soon..Password JDM rear strut bar/ 4 point
Soon..Skunk2 short shifter
Spoon Shift ****
Integra type R shift boot
Integra GSR cluster
Integra type R arm rest delete
Soon..Air bag tray
Soon..4 point harness
Soon..Sound deadening removed
Suspension
Hardrace front lcas
Hardrace front sway bar endlinks
Hardrace D bracket bushings
Hardrace compliance bushings
Integra type R 25mm front sway bar
Soon..3 point strut tower bar
Soon..4 point rear strut tower bar
Soon.. Integra type R rear interior bar
Hardrace steering rack bushings
OEM lower ball joints
Skunk2 Upper ball joints and camber kit
Blox Subframe rigid collars
Koni Yellow shocks
Ground control Race springs 600F/500R
Ground control extended top hats
Skunk2 Rear lcas
Eibach 25mm rear sway bar
Asr brace
Eibach Endlinks
Prothane B bracket bushings
Hardrace Trailing arm bushings
OEM compensator arms "new"
OEM Outer Tie rods new
Wheels
Spoon Sw388 16x7 +45
Falken Azenis rt 615k Tires
Eibach 5 mm spacers
Arp Extended studs
Buddyclub extended lug nuts
Brakes
Brembo Blanks
Hawk HPS pads
Goodridge brake lines
Motor,trans
B20 Block
Stock sleeves
Stock rods
Arp rod bolts
Acl Rod bearings,thrust washers, Crank bearings.
RS Machine 84.5mm pistons, "Around 12.0 Compression "
Soon.. Baffled oil pan
Soon..single crank pully
B16 head
Ported/3 angle valve job by CCCylinderheads
Supertech Valve guides
Supertech Valve seals
Supertech dual valve springs with Titanium retainers
Buddyclub Spec IV Cams
Buddyclub Cam gears
Itr valve cover
Soon..Breather setup
Skunk2 intake manifold
Professional throttle body 68mm
3 Inch intake Arm
Blox Velocity Stack
Skunk2 Alpha Header
Soon..Skunk2 70mm B pipe
Spoon N1 muffler
Precision 440cc injectors
Soon.. Walbro fuel pump, 255lhp
Ngk plugs/wires
Chipped ecu...may do hondata..
B16 Transmission
CC 6 puck clutch
CC 9lbs flywheel
Mfactory lsd
Soon..working on cooling setup..
Exterior
01 Front bumper
01 Rear bumper
01 Headlights/bumper lenses *smoked*
01 Mud flaps
01 Integra Type R front lip *OEM*
Soon.. JDM 01 Integra tail lights
Integra type R rear spoiler
Body work done at caliber collision
Painted Factory Frost white.
Shaved moldings for that "Integra type R" look.
Interior
Gutted..
Personal 330 grinata Steering wheel, *suede with red stich*
Personal Hub.
Buddy club seat/brackets (red)
Soon..Password JDM rear strut bar/ 4 point
Soon..Skunk2 short shifter
Spoon Shift ****
Integra type R shift boot
Integra GSR cluster
Integra type R arm rest delete
Soon..Air bag tray
Soon..4 point harness
Soon..Sound deadening removed
Suspension
Hardrace front lcas
Hardrace front sway bar endlinks
Hardrace D bracket bushings
Hardrace compliance bushings
Integra type R 25mm front sway bar
Soon..3 point strut tower bar
Soon..4 point rear strut tower bar
Soon.. Integra type R rear interior bar
Hardrace steering rack bushings
OEM lower ball joints
Skunk2 Upper ball joints and camber kit
Blox Subframe rigid collars
Koni Yellow shocks
Ground control Race springs 600F/500R
Ground control extended top hats
Skunk2 Rear lcas
Eibach 25mm rear sway bar
Asr brace
Eibach Endlinks
Prothane B bracket bushings
Hardrace Trailing arm bushings
OEM compensator arms "new"
OEM Outer Tie rods new
Wheels
Spoon Sw388 16x7 +45
Falken Azenis rt 615k Tires
Eibach 5 mm spacers
Arp Extended studs
Buddyclub extended lug nuts
Brakes
Brembo Blanks
Hawk HPS pads
Goodridge brake lines
Motor,trans
B20 Block
Stock sleeves
Stock rods
Arp rod bolts
Acl Rod bearings,thrust washers, Crank bearings.
RS Machine 84.5mm pistons, "Around 12.0 Compression "
Soon.. Baffled oil pan
Soon..single crank pully
B16 head
Ported/3 angle valve job by CCCylinderheads
Supertech Valve guides
Supertech Valve seals
Supertech dual valve springs with Titanium retainers
Buddyclub Spec IV Cams
Buddyclub Cam gears
Itr valve cover
Soon..Breather setup
Skunk2 intake manifold
Professional throttle body 68mm
3 Inch intake Arm
Blox Velocity Stack
Skunk2 Alpha Header
Soon..Skunk2 70mm B pipe
Spoon N1 muffler
Precision 440cc injectors
Soon.. Walbro fuel pump, 255lhp
Ngk plugs/wires
Chipped ecu...may do hondata..
B16 Transmission
CC 6 puck clutch
CC 9lbs flywheel
Mfactory lsd
Soon..working on cooling setup..
Last edited by Na-Spirit; 09-07-2012 at 09:28 AM.
#384
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: Antarctica
Posts: 988
Likes: 0
Received 0 Likes
on
0 Posts
Re: My teg build, i suck at cars by the way..soo help out?
Thanks guys.. Doing the final touches on the suspension/brakes today. Will be finally complete. I should see my Mfactory lsd tomorrow or tuesday, Using the evans tuning vid for my guide.
Next month the wheels go out to get fixed..I believe they quoted me 125 a rim sooo ya, dumb expensive but sh*t happens. Focus is getting that motor in right now.
Next month the wheels go out to get fixed..I believe they quoted me 125 a rim sooo ya, dumb expensive but sh*t happens. Focus is getting that motor in right now.
#385
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: Antarctica
Posts: 988
Likes: 0
Received 0 Likes
on
0 Posts
Re: My teg build, i suck at cars by the way..soo help out?
New "used" rear brake caliper seeing my other one was giving me ****.. Also got some Front brake line brackets to do away with the zip tie bullshit.. Painted up
Brake line brakets installed.. Front suspension/brakes complete.
Rear suspension/brakes complete.
Hung my abs wires up.. Used black zip ties seeing there's no bolt hole for the abs sensor wire......
Rear brake line installed.
Brake line brakets installed.. Front suspension/brakes complete.
Rear suspension/brakes complete.
Hung my abs wires up.. Used black zip ties seeing there's no bolt hole for the abs sensor wire......
Rear brake line installed.
#387
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: Antarctica
Posts: 988
Likes: 0
Received 0 Likes
on
0 Posts
Re: My teg build, i suck at cars by the way..soo help out?
Also received my Buddyclub seat .. Just need to get some beefy seat rails and my 4 point harness.
.
.
.
.
.
.
#388
Honda-Tech Member
Join Date: Sep 2008
Location: Grand Rapids, MI
Posts: 2,678
Likes: 0
Received 0 Likes
on
0 Posts
Re: My teg build, i suck at cars by the way..soo help out?
Man I love this car one of my favorite builds still. Did you repaint the rear section of the interior?
#389
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: Antarctica
Posts: 988
Likes: 0
Received 0 Likes
on
0 Posts
Re: My teg build, i suck at cars by the way..soo help out?
Thank you! It's been a fun experience..besides the money part ha. I would love to paint the engine bay and interior. We'll see... Problem is the car is in my familys garage, Probably wouldn't be a good idea ha.
Ordering more stuff friday.. Going with the PCI seat rail, and undecided on harness, thinking takata to really contrast the white/black car. Installing the LSD today and hopefully drop the motor in next week
Ordering more stuff friday.. Going with the PCI seat rail, and undecided on harness, thinking takata to really contrast the white/black car. Installing the LSD today and hopefully drop the motor in next week
#395
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: Antarctica
Posts: 988
Likes: 0
Received 0 Likes
on
0 Posts
Re: My teg build, i suck at cars by the way..soo help out?
Painted up my motor, intake manifold , stuff..
Before:
After:
Lsd Installed by me (thanks to evanstuning video!) and tranny painted up.
Before:
After:
Lsd Installed by me (thanks to evanstuning video!) and tranny painted up.
#396
Honda-Tech Member
Join Date: May 2007
Location: MrKrispy
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
Re: My teg build, i suck at cars by the way..soo help out?
Progress is lookin good man. I need to get me an LSD transmission, my LS is just not cutting it lol. Keep it up
I'm still looking into wheel anodizing, I think I found a place up in Northern WA that does it but its not the cheapest..
I'm still looking into wheel anodizing, I think I found a place up in Northern WA that does it but its not the cheapest..
#398
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: Antarctica
Posts: 988
Likes: 0
Received 0 Likes
on
0 Posts
Re: My teg build, i suck at cars by the way..soo help out?
Ya I love the close gearing on the b16.. I've never had a lsd before, but I figure it'll come in handy at the track and drag strip.. soo can't cheap out there. It's not too bad installing a lsd, im a idiot and I did it ha.. that evanstuing video was great, step by step assemble and reassemble.
Ya on the wheels im probably just going to have them match it the best they can and just roll it.. want that sh*t flat, no luster! hopefully they can pull it off with powdercoating.
I hear your going to start setting your car up for circuit driving? Can't wait to see that.
Thanks kidmase! I'm excited to see this thing run
Ya on the wheels im probably just going to have them match it the best they can and just roll it.. want that sh*t flat, no luster! hopefully they can pull it off with powdercoating.
I hear your going to start setting your car up for circuit driving? Can't wait to see that.
Thanks kidmase! I'm excited to see this thing run
#399
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: Antarctica
Posts: 988
Likes: 0
Received 0 Likes
on
0 Posts
Re: My teg build, i suck at cars by the way..soo help out?
Competition Flywheel..I believe 8-9lbs
Competition clutch with sprung 6 puck disc.
Tranny was being a bitch to slide on... got late, had to call it quits tonight, more jiggling tomorrow......
Competition clutch with sprung 6 puck disc.
Tranny was being a bitch to slide on... got late, had to call it quits tonight, more jiggling tomorrow......
#400
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: Antarctica
Posts: 988
Likes: 0
Received 0 Likes
on
0 Posts
Re: My teg build, i suck at cars by the way..soo help out?
Spoon thermostat and switch.
Got the motor in! kinda.. have to adjust the tranny. Couldnt get it on right on the ground, We used the underneath method to get the motor in ha..worked nice.
The header and intake are just placed on for looks, more sh*t to do in there obviously.
Got the motor in! kinda.. have to adjust the tranny. Couldnt get it on right on the ground, We used the underneath method to get the motor in ha..worked nice.
The header and intake are just placed on for looks, more sh*t to do in there obviously.