Chase's red 92 DA-K build
#106
Honda-Tech Member
Thread Starter
Re: Chase's red 92 DA-K build
As far as the swap goes, first priority is get the current pass. side mount cut off & get the Hasport mount welded on. Then it's on to the wire tuck, then off to the body shop for paint.
#108
Honda-Tech Member
Re: Chase's red 92 DA-K build
fastenal and like 10 bucks should have your bay covered... my da has sat for about 15 months because of budget issues so i understand that one too
#112
Honda-Tech Member
Thread Starter
Re: Chase's red 92 DA-K build
Werd! Either of you know what type plug to use where the wiper motor mounts on the passenger side? I'm not gonna use the wipers since it's a weekend car.
#113
Honda-Tech Member
Re: Chase's red 92 DA-K build
http://www.caplugs.com/productdetail...IES&id=1000005
* note it's just the black polyurethane cap not the aviation connector as pictured
i used to work aviation we usually just throw stuff like this away but it's what i used on my da.. looks way better then a hole
you also might be able to use the msn to get one through depo/supply depending on who you know
#116
Honda-Tech Member
Thread Starter
Re: Chase's red 92 DA-K build
i dont know if it will help because i dont know if you can order them but Caplug part number CEC-25 fits perfect if you know some guys in aviation that may have some sitting around from electrical connectors you could probably get one for free here is the website to give you an idea of what i'm talking about
http://www.caplugs.com/productdetail...IES&id=1000005
* note it's just the black polyurethane cap not the aviation connector as pictured
i used to work aviation we usually just throw stuff like this away but it's what i used on my da.. looks way better then a hole
you also might be able to use the msn to get one through depo/supply depending on who you know
http://www.caplugs.com/productdetail...IES&id=1000005
* note it's just the black polyurethane cap not the aviation connector as pictured
i used to work aviation we usually just throw stuff like this away but it's what i used on my da.. looks way better then a hole
you also might be able to use the msn to get one through depo/supply depending on who you know
Sunday, I'm off work, so I made a little progress. I started to re-assemble the suspension until I realized I absolutely couldn't ignore the front sub-frame.
Front subframe before (I didn't get pics of the inside area, for some odd reason)
And after
Who needs powdercoat
The front LCA's were in a box after getting bushings and I forgot to paint them before now
And FML if I ever have to pull another fuel tank
Getting ready for the Walbro 255 install
And the search is on for a new sending unit since Acura discontinued it
While on my day off today I picked up some random clips I needed. The core support rubber strip clips are ordered and the windshield wiper cowl was missing some of these so I got new ones
And just cause, a preview of the new kicks
Enkei J-Speed 15x8 +25
Last edited by ChaseIntegra; 11-29-2011 at 12:13 PM.
#119
EFSS153
Re: Chase's red 92 DA-K build
On EFs, the a/c delete grommet on the firewall fits perfectly in the wiper motor hole. It may be worth a shot on the DA. *shrug*
#122
Honda-Tech Member
Thread Starter