A51_RPS13...The Beginning of the S2 Build
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2002
Location: san mateo, ca
Posts: 534
Likes: 0
Received 0 Likes
on
0 Posts
A51_RPS13...The Beginning of the S2 Build
I bought my S2 used for $20,000. It had 37,000 miles on it, and in great condition. I've had my '03 S2K for about a year now, and I figured I'd show how far my car progresses. Here are some pictures as it sits with pictures of the mods:
This is where I've started: AP2 front bumper
Next Mod was the OEM Hard Top and Volk GT-7's in 18x7.5 +50 and 18x8.0 +50, during this time, it was also time to change the pads, so I went with Hawk HP+ pads:
Unfortunately, my diff blew up on me. So I started looking into building a diff, I found PuddyMod Racing out of Florida who builds custom diffs for the S2000. I after a lot of research and debate, I went with a Custom Reenforced Diff built by PuddyMod himself. The picture below illustrates the difference between the 1.stock caps (top), the Comptech Reenforced Caps (middle), and PuddyMod Racing Caps (bottom).
The housing for the caps:
I went with 4.56 gears Cryo-Treated because of the diff failure that I had. When the diff blew up, the ring and pinion teeth went all over the place inside the diff itself. I went with the extra $100 investment for peace of mind:
And finally the built diff:
I went through a couple other parts that I bought but never got a chance to install, like the NRG Shock Tower Bar X-Brace. I couldn't install it when I got my Comptech Intake, which I found for a great deal:
Here are some shots I took with BlueDC2NR:
In the next few months, I will have a new J's 60 RS Exhaust, KW Variant 3 Coilovers, and any other parts I find for a good deal along the way. Hope you guys enjoy it! More pics to come....
UPDATES ON PAGE 2 AND 3
Modified by A51_RPS13 at 8:47 PM 3/10/2008
Modification List:
Engine:
Comptech CAI
Ricks 6+ Header (uninstalled)
J's 60 RS exhaust
Hawk HPS F&R Pads
PuddyMod built AP1 diff with 4.56 Cryo-Treated Gears
Modifry Yellow Jacket Speed Calibrator
Mugen Fan Switch
Exterior:
OEM GPW Hardtop
Side Strikes
Advan RGII 17x7.5 and 17x8.5
Project Kics R26 Neo Chrome Lug Nuts
AP2 Front Bumper
AP2 OEM Front Lip
NRG Hood Dampers
KW Variant 3 Coilovers!
Pending Install: Mugen Thermostat, Samco Radiator Hoses, Comptech Flywheel, J's AP1 Front Half Lip, Ricks 6+ Header
Modified by A51_RPS13 at 7:20 AM 3/14/2008
Modified by A51_RPS13 at 7:21 AM 3/14/2008
This is where I've started: AP2 front bumper
Next Mod was the OEM Hard Top and Volk GT-7's in 18x7.5 +50 and 18x8.0 +50, during this time, it was also time to change the pads, so I went with Hawk HP+ pads:
Unfortunately, my diff blew up on me. So I started looking into building a diff, I found PuddyMod Racing out of Florida who builds custom diffs for the S2000. I after a lot of research and debate, I went with a Custom Reenforced Diff built by PuddyMod himself. The picture below illustrates the difference between the 1.stock caps (top), the Comptech Reenforced Caps (middle), and PuddyMod Racing Caps (bottom).
The housing for the caps:
I went with 4.56 gears Cryo-Treated because of the diff failure that I had. When the diff blew up, the ring and pinion teeth went all over the place inside the diff itself. I went with the extra $100 investment for peace of mind:
And finally the built diff:
I went through a couple other parts that I bought but never got a chance to install, like the NRG Shock Tower Bar X-Brace. I couldn't install it when I got my Comptech Intake, which I found for a great deal:
Here are some shots I took with BlueDC2NR:
In the next few months, I will have a new J's 60 RS Exhaust, KW Variant 3 Coilovers, and any other parts I find for a good deal along the way. Hope you guys enjoy it! More pics to come....
UPDATES ON PAGE 2 AND 3
Modified by A51_RPS13 at 8:47 PM 3/10/2008
Modification List:
Engine:
Comptech CAI
Ricks 6+ Header (uninstalled)
J's 60 RS exhaust
Hawk HPS F&R Pads
PuddyMod built AP1 diff with 4.56 Cryo-Treated Gears
Modifry Yellow Jacket Speed Calibrator
Mugen Fan Switch
Exterior:
OEM GPW Hardtop
Side Strikes
Advan RGII 17x7.5 and 17x8.5
Project Kics R26 Neo Chrome Lug Nuts
AP2 Front Bumper
AP2 OEM Front Lip
NRG Hood Dampers
KW Variant 3 Coilovers!
Pending Install: Mugen Thermostat, Samco Radiator Hoses, Comptech Flywheel, J's AP1 Front Half Lip, Ricks 6+ Header
Modified by A51_RPS13 at 7:20 AM 3/14/2008
Modified by A51_RPS13 at 7:21 AM 3/14/2008
#3
Honda-Tech Member
Re: (Nysh)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Nysh »</TD></TR><TR><TD CLASS="quote">Doesn't matter what you do to an S2000.
They still look good.
Lovin the white for sure. </TD></TR></TABLE>
They still look good.
Lovin the white for sure. </TD></TR></TABLE>
#5
All Secrets Known
Join Date: Aug 2004
Location: Anywhere from NJ to NC
Posts: 13,260
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Nysh)
Looks good. AP2 front bumper sets it off nicely.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Nysh »</TD></TR><TR><TD CLASS="quote">Doesn't matter what you do to an S2000.
They still look good.
</TD></TR></TABLE>
O Rly?
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Nysh »</TD></TR><TR><TD CLASS="quote">Doesn't matter what you do to an S2000.
They still look good.
</TD></TR></TABLE>
O Rly?
Trending Topics
#8
Honda-Tech Member
Re: (Nysh)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Nysh »</TD></TR><TR><TD CLASS="quote">Doesn't matter what you do to an S2000.
They still look good.
</TD></TR></TABLE>
s2k CR?
stfu
They still look good.
</TD></TR></TABLE>
s2k CR?
stfu
#10
Honda-Tech Member
Thread Starter
Join Date: Jul 2002
Location: san mateo, ca
Posts: 534
Likes: 0
Received 0 Likes
on
0 Posts
Re: A51_RPS13...The Beginning of the S2 Build (Airbag Club)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Airbag Club »</TD></TR><TR><TD CLASS="quote">best euro for sure!! </TD></TR></TABLE>
You know it! How you been Ryan? I need to shoot your car
I got all the ATS pictures up, did you see them?
Thanks guys...I know I'm probably gonna change the wheels soon.
You know it! How you been Ryan? I need to shoot your car
I got all the ATS pictures up, did you see them?
Thanks guys...I know I'm probably gonna change the wheels soon.
#11
Honda-Tech Member
Re: A51_RPS13...The Beginning of the S2 Build (A51_RPS13)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by A51_RPS13 »</TD></TR><TR><TD CLASS="quote">
You know it! How you been Ryan? I need to shoot your car
I got all the ATS pictures up, did you see them?
Thanks guys...I know I'm probably gonna change the wheels soon.</TD></TR></TABLE>
doing good. slow day at work today, half the people in the office are gone.
i saw your thread of the ATS folks, but photobucket is banned at my work, so i can't view any of the pictures.. i'll check it out later when i get home.
btw.. didn't realize this screen name was your's! i've seen it a long time ago!
You know it! How you been Ryan? I need to shoot your car
I got all the ATS pictures up, did you see them?
Thanks guys...I know I'm probably gonna change the wheels soon.</TD></TR></TABLE>
doing good. slow day at work today, half the people in the office are gone.
i saw your thread of the ATS folks, but photobucket is banned at my work, so i can't view any of the pictures.. i'll check it out later when i get home.
btw.. didn't realize this screen name was your's! i've seen it a long time ago!
#12
Honda-Tech Member
Thread Starter
Join Date: Jul 2002
Location: san mateo, ca
Posts: 534
Likes: 0
Received 0 Likes
on
0 Posts
Re: A51_RPS13...The Beginning of the S2 Build (Airbag Club)
Haha, yeah, I was using this back when I had my 240, and then I was using it while I was on the East Coast when I had my EK...
I didn't know Airbag Club was you either! I've seen you around forever too!
I didn't know Airbag Club was you either! I've seen you around forever too!
#15
Honda-Tech Member
Thread Starter
Join Date: Jul 2002
Location: san mateo, ca
Posts: 534
Likes: 0
Received 0 Likes
on
0 Posts
Re: A51_RPS13...The Beginning of the S2 Build (iheartintegras)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by iheartintegras »</TD></TR><TR><TD CLASS="quote"> </TD></TR></TABLE>
Thanks bro!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by diLLy »</TD></TR><TR><TD CLASS="quote">when you mentioned RPS13, i was expecting to see an S13. but thats your screen name.
haha.
</TD></TR></TABLE>
Haha, sorry! Well I hope to build another one soon, but it wont be too soon, since I have to build the S2
Thanks bro!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by diLLy »</TD></TR><TR><TD CLASS="quote">when you mentioned RPS13, i was expecting to see an S13. but thats your screen name.
haha.
</TD></TR></TABLE>
Haha, sorry! Well I hope to build another one soon, but it wont be too soon, since I have to build the S2
#17
Honda-Tech Member
Thread Starter
Join Date: Jul 2002
Location: san mateo, ca
Posts: 534
Likes: 0
Received 0 Likes
on
0 Posts
Re: A51_RPS13...The Beginning of the S2 Build (JDM INSPIRED)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDM INSPIRED »</TD></TR><TR><TD CLASS="quote">nice </TD></TR></TABLE>
Thanks man. Appriciate all the great comments.
Thanks man. Appriciate all the great comments.
#21
Honda-Tech Member
Thread Starter
Join Date: Jul 2002
Location: san mateo, ca
Posts: 534
Likes: 0
Received 0 Likes
on
0 Posts
Re: A51_RPS13...The Beginning of the S2 Build (ATS*ALLDAY)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ATS*ALLDAY »</TD></TR><TR><TD CLASS="quote">....lookin good ben! </TD></TR></TABLE>
Thanks bro, it will look even better when I get my J's exhaust this weekend. I wont put it on until next week though.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RP215. »</TD></TR><TR><TD CLASS="quote">It will look so clean once you slam it on the coils </TD></TR></TABLE>
I know, but it's gonna cost $$$ b/c I'm going for the KW V3's
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SFBPI504 »</TD></TR><TR><TD CLASS="quote"> </TD></TR></TABLE>
Thanks man!
The J's 60 RS is coming this week, and I may have some new wheels coming next week! Some Advan RG II's are looking real nice, and the price is just right. I hope I don't win the bid for the CE28's though...
Thanks bro, it will look even better when I get my J's exhaust this weekend. I wont put it on until next week though.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RP215. »</TD></TR><TR><TD CLASS="quote">It will look so clean once you slam it on the coils </TD></TR></TABLE>
I know, but it's gonna cost $$$ b/c I'm going for the KW V3's
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SFBPI504 »</TD></TR><TR><TD CLASS="quote"> </TD></TR></TABLE>
Thanks man!
The J's 60 RS is coming this week, and I may have some new wheels coming next week! Some Advan RG II's are looking real nice, and the price is just right. I hope I don't win the bid for the CE28's though...
#22
Honda-Tech Member
Thread Starter
Join Date: Jul 2002
Location: san mateo, ca
Posts: 534
Likes: 0
Received 0 Likes
on
0 Posts
Re: A51_RPS13...The Beginning of the S2 Build (A51_RPS13)
well, this took a LOT longer than how long it was supposed to be, but I installed my nice suprise today
what is that????!?!??!?!
So easy to install my new J'S 60RS ! Sounds amazing...I'll post some better pictures tomorrow if it's not raining still tomorrow!
what is that????!?!??!?!
So easy to install my new J'S 60RS ! Sounds amazing...I'll post some better pictures tomorrow if it's not raining still tomorrow!