Dizzzle

Sup. Ive posted my build thread everywhere on multiple sites and thought I would post it in this section also.

Plans
Vitara Pistons
Eagle H Beam rods
CTR wing
CTR carpet
CTR Skirts
CTR Front and Rear lip
JDM Fenders
Diamond Racing wheels 15x10 all the way around
Koni and Ground controls
Shave and tucked bay and Hatch
(No plans on what turbo I will be running)

OKAY so heres the photos so far

First day I got it















Started pulling the motor a few days later, Rod had shot threw the block.























A Week later we had time to start pulling the head apart.







hole in the block. Not the small bb size one but right above it has a thumb size hole threw the block.




Pulling the manifold out and hoses.





Pulling the motor out (about 3-4 weeks after I bought the car)







Had a buddy call me up and told me he had a bottom end for me and ETC parts



Shaving the hatch...















^^ dont mind the dirt in the driver side rear seat part, Happen'd when I pulled the carpet up. (Getting type R Carpet)









Getting the bay ready for welds. Nov 6 2010

































I didn't have time to clean up the inside of the car before I took photos but its w/e...

Also I didnt take a photo of where I had almost got the old bent lower core support off but I didn't get to finish because I need a new blade.



More to come soon.

j-r_rida

looks like a promising build, good luck with it!!!

DrZFiNeSt

iTrader: (1)

Like the direction it's headed,In for this

Dizzzle

Both lower core support and bumper support were removed today. Also started welding in pieces for the firewall hole deletes. And a lot of sanding has went down.... Photos up tomorrow.

DVDr

iTrader: (2)

lots of work, keep us updated.

H1GARAGE

good job bro

Dizzzle

Thanks, I have a lot of progress on this next update. Tons of sanding and ****.. Weather has been bad here in louisville this week so Ill try to get some pics uploaded tomorrow or so.

oneEg1Tc

in for this . i have a 99 ek hatch and don't know what to do

Dizzzle

I also have a 06 tC....

Dizzzle

Havent been working on it much lately due to it being cold outside. I need to finish grinding down a few more welds and then I can get back to sanding.


Yes I know there are still alot of highs and lows...


Im still pushing to get this painted and maybe running by spring IA.. Parts will start being ordered once I get close to finishing the bay.

If anyone has ever done a complete shaved by as what Im doing you know the pain im going threw on this ****.. Dont think I would ever do it again.

Dizzzle

The build has been going very slow and I apologize to all my subs. But it has been like 20 Degrees average here and it is now starting to warm up. But the firewall is almost out.
Also dont ask as to why I took the firewall shield out "I did because I didnt notice that you could take it out with it still on there, Thought that there was welds behind it I needed to get to.













Also ordered my CTR Folding mirrors.

rhd91integra

Sick!

Dizzzle

Been workin on the bay a bit and got a few more holes drilled..This aint easy at all.

sirmugenpower

good start so far those damn holes are a pain lol i just did mine check out my thread in my sig bro gl with your build bro it's all worth it as soon as you have the rhd clip sitting in your garage lol

Dizzzle

Just got done touching up part of the bay and got the scrap firewall out, no turning back now!

ChadB

KEEP GOING!!!

Squidette

^^^^^wat he said lol

92bseries

im with them^^^^

Dizzzle

Going out side to work on it right now

92bseries

ya its warm today, no excuses for nothing gettin done, haha

yodatdelslo

Great work so far, good luck with the build.

92egvx

xx222 nice

brandonEM1

nice work! keep it up

Dizzzle

Thanks people.. I almost have the firewall out

Dizzzle