90 hatch b18a1 wire tuck ,chop top ,one epice front ,rust repair ,paint
#26
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: in the sticks, manitoba, canada
Posts: 1,072
Likes: 0
Received 0 Likes
on
0 Posts
#27
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: in the sticks, manitoba, canada
Posts: 1,072
Likes: 0
Received 0 Likes
on
0 Posts
Re: (phatboycrxhf)
k I'm really starting to think this is a crx rear bumper .the freakin thing is such a bad fit ,that i had to cut it in half and allso cut off on the sides as well .And i allso think i have to cut the top off ,like wtf ,i didnt want this much work for a dang bodykit ,unless i lower the kit down and add to the sides ,but i dont want it to sit too low.... whatever i'll get it right
i wanted to keep going but i dont have resin and i can't find any in this new town i moved to so i'm going to have to run to the city ,drive 2 f%*kin hours for some damn resin and cloth/mat :angry:
and i'm fitting the kit now ,so when i get to body work on the shell i wont have to worry about dinging it up or getting anything on it .
i wanted to keep going but i dont have resin and i can't find any in this new town i moved to so i'm going to have to run to the city ,drive 2 f%*kin hours for some damn resin and cloth/mat :angry:
and i'm fitting the kit now ,so when i get to body work on the shell i wont have to worry about dinging it up or getting anything on it .
#29
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: in the sticks, manitoba, canada
Posts: 1,072
Likes: 0
Received 0 Likes
on
0 Posts
Re: (hb420)
yes sir
still havent picked up fiberglass resin and what not ,so i figured i might as well get back to the bay for a bit
drpped the cross member and subframe and got that brake line off too ,but it broke right when it broke loose ,such a **** off haha oh well
i really want to shave most of those i dont even know what to call them ont he fire wall to smooth it out ,think i should ? would take forever ,but look sick i think
i'm removeing the old seam sealer right now
yeah i suck ,but whatever got a bit done sorta :shrug
still havent picked up fiberglass resin and what not ,so i figured i might as well get back to the bay for a bit
drpped the cross member and subframe and got that brake line off too ,but it broke right when it broke loose ,such a **** off haha oh well
i really want to shave most of those i dont even know what to call them ont he fire wall to smooth it out ,think i should ? would take forever ,but look sick i think
i'm removeing the old seam sealer right now
yeah i suck ,but whatever got a bit done sorta :shrug
#31
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: in the sticks, manitoba, canada
Posts: 1,072
Likes: 0
Received 0 Likes
on
0 Posts
Re: (phatboycrxhf)
said screw the kit for now ,since i still havent got fiberglass resin
so i'm welding the bay welding the bay welding the bay alll day day day ,thats song is kinda gay gay gay
dont mind me to much sun
^
pics to come
so i'm welding the bay welding the bay welding the bay alll day day day ,thats song is kinda gay gay gay
dont mind me to much sun
^
pics to come
#33
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: in the sticks, manitoba, canada
Posts: 1,072
Likes: 0
Received 0 Likes
on
0 Posts
Re: (JKGONZALEZ3)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JKGONZALEZ3 »</TD></TR><TR><TD CLASS="quote">damn, shaving the bay thats gonna take some time. take some pics of peices cut to fit in the holes.</TD></TR></TABLE>
will do ,i was just filling holes today and filling old spot welds ,dont want to use much filler ,but i'm sure i will anyways to get the nice clean shape like others have
hit with a grinder to knock down my savage welds haha kinda over did it there and will hit it with the floppy next and progress finer
i
im just going to remove all the wheel well undercoat ,since its just making it hard to weld with the smoke and fires :shrug
this is going to take a while :stunned
more to come ,i gotta work tonight so had to stop
will do ,i was just filling holes today and filling old spot welds ,dont want to use much filler ,but i'm sure i will anyways to get the nice clean shape like others have
hit with a grinder to knock down my savage welds haha kinda over did it there and will hit it with the floppy next and progress finer
i
im just going to remove all the wheel well undercoat ,since its just making it hard to weld with the smoke and fires :shrug
this is going to take a while :stunned
more to come ,i gotta work tonight so had to stop
#34
Honda-Tech Member
Join Date: Jun 2006
Location: Long Beach
Posts: 4,334
Likes: 0
Received 0 Likes
on
0 Posts
i filled in some some spot welds on the passanger side of my bay and welded where the seam sealer was but i stopped cause i didnt know if it was gonna pay off. i might finish the other side when i drop my engine tho.
#35
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: in the sticks, manitoba, canada
Posts: 1,072
Likes: 0
Received 0 Likes
on
0 Posts
Re: (JKGONZALEZ3)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JKGONZALEZ3 »</TD></TR><TR><TD CLASS="quote">i filled in some some spot welds on the passanger side of my bay and welded where the seam sealer was but i stopped cause i didnt know if it was gonna pay off. i might finish the other side when i drop my engine tho. </TD></TR></TABLE>
well from what i seen from all these shaved bays it does clean it up ,is it worth it time wise ....hell no haha but whatever its all apart now might as well ,and if you got half done might as well finish it once you have time
well from what i seen from all these shaved bays it does clean it up ,is it worth it time wise ....hell no haha but whatever its all apart now might as well ,and if you got half done might as well finish it once you have time
#36
Honda-Tech Member
all this labor, and you're using a body kit from the late 90s. everyone is going to give you crap for not using a jdm sir bumper set, but I wont.
best luck to you
best luck to you
#38
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: in the sticks, manitoba, canada
Posts: 1,072
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Spec R)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Spec R »</TD></TR><TR><TD CLASS="quote">all this labor, and you're using a body kit from the late 90s. everyone is going to give you crap for not using a jdm sir bumper set, but I wont.
best luck to you</TD></TR></TABLE>
lol noone is going to say anything ,sure there will be a few haters ,but there allways is and to be honest if they still havent learned that i dont give a *beep* then obviously theyre not very smart to begin with
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nA_Gsr303 »</TD></TR><TR><TD CLASS="quote">I just got the rest of what happened to the teg dude so much time into the integra for such a story that blows.
</TD></TR></TABLE>
yeah it sucks huh ...oh well i still did it ,just wish i could have taken it to at least one show or something
i dont like this part :?
took me 2 hours to get to that point ,i thought it would take me an hour haha ,still a ways too go
just taking a break going to do a bit more before work
whoops i forgot the mini project that took 3 minutes lol and i welded without my gas hooked up haha
going to make 3 more for the rest of my air tools ,sanders bradnailer exc exc
best luck to you</TD></TR></TABLE>
lol noone is going to say anything ,sure there will be a few haters ,but there allways is and to be honest if they still havent learned that i dont give a *beep* then obviously theyre not very smart to begin with
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nA_Gsr303 »</TD></TR><TR><TD CLASS="quote">I just got the rest of what happened to the teg dude so much time into the integra for such a story that blows.
</TD></TR></TABLE>
yeah it sucks huh ...oh well i still did it ,just wish i could have taken it to at least one show or something
i dont like this part :?
took me 2 hours to get to that point ,i thought it would take me an hour haha ,still a ways too go
just taking a break going to do a bit more before work
whoops i forgot the mini project that took 3 minutes lol and i welded without my gas hooked up haha
going to make 3 more for the rest of my air tools ,sanders bradnailer exc exc
#39
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: in the sticks, manitoba, canada
Posts: 1,072
Likes: 0
Received 0 Likes
on
0 Posts
Re: (phatboycrxhf)
trying to fix this dc header ....might be a lost cause since the down pipe flange is warped and its been welded alot ,it ground down and buffed it up a bit
man blurry as hell ,i think i'm going to hav to grind down my welds and try again ,the person who welded before blew through alot ,like i mean an inch wide at least on the inside and and cant seem to lay a weld to cover it up without doing 2 passes and i'm having trouble getting my welds to lay down too aswell ops:
man blurry as hell ,i think i'm going to hav to grind down my welds and try again ,the person who welded before blew through alot ,like i mean an inch wide at least on the inside and and cant seem to lay a weld to cover it up without doing 2 passes and i'm having trouble getting my welds to lay down too aswell ops:
#42
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: in the sticks, manitoba, canada
Posts: 1,072
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Danger)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Danger »</TD></TR><TR><TD CLASS="quote">i just went through your whole integra thread, great stuff in there. </TD></TR></TABLE>
thank you bud ,i tried my best
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JKGONZALEZ3 »</TD></TR><TR><TD CLASS="quote">you shined up that header nice.</TD></TR></TABLE>
nah bud its still all beat and stuff ,better then it was but still garbage lol but thanks
you got a build page or anything going on ? or a pic of your car ? id like to see it
updates tomorow guys or maybe tonite if i got the ***** to go all night on her haha
thank you bud ,i tried my best
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JKGONZALEZ3 »</TD></TR><TR><TD CLASS="quote">you shined up that header nice.</TD></TR></TABLE>
nah bud its still all beat and stuff ,better then it was but still garbage lol but thanks
you got a build page or anything going on ? or a pic of your car ? id like to see it
updates tomorow guys or maybe tonite if i got the ***** to go all night on her haha
#43
Honda-Tech Member
Join Date: Jun 2006
Location: Long Beach
Posts: 4,334
Likes: 0
Received 0 Likes
on
0 Posts
yea i have a build thread but i havent updated it since last year ive put a lot of work on it since then but im waiting till after i get it painted and wheels so i can have a decent update instead of little stuff.
#44
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: in the sticks, manitoba, canada
Posts: 1,072
Likes: 0
Received 0 Likes
on
0 Posts
Re: (JKGONZALEZ3)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JKGONZALEZ3 »</TD></TR><TR><TD CLASS="quote">yea i have a build thread but i havent updated it since last year ive put a lot of work on it since then but im waiting till after i get it painted and wheels so i can have a decent update instead of little stuff.</TD></TR></TABLE>
nice nice ,link for me ? i'm lazy lol
well my boy has got me all chicken to do the chop ,so i dont know what to do ,i think it would look sick but is it worth it lol damnit .what to do what to do
anyways i havent been upto much the last few days ,tomorow i should have some pics though. i did cut out the ares for the altenator .so now i gotta make it all nice nice
nice nice ,link for me ? i'm lazy lol
well my boy has got me all chicken to do the chop ,so i dont know what to do ,i think it would look sick but is it worth it lol damnit .what to do what to do
anyways i havent been upto much the last few days ,tomorow i should have some pics though. i did cut out the ares for the altenator .so now i gotta make it all nice nice
#46
Honda-Tech Member
Join Date: Jun 2006
Location: Long Beach
Posts: 4,334
Likes: 0
Received 0 Likes
on
0 Posts
#47
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: in the sticks, manitoba, canada
Posts: 1,072
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Dann6968)
lol thats whats up
so i havent been upto much on the car guys ,woth work ,life and what not i just havent had time and or felt like working on it .
i did allmost all the sound **** off the passenger side floor and am allmost ready to finisht he drivers and then sand .this place doesnt have dry ice so i did it by hand with just a hammer and a flat screw driver (took forever) but its out
few pics of that
i allso finishedthe welding and cleaning up the passenger side of the bay ,ready for filler ,but need hardener (lost it in the move i think )allso did a patch on the driver frame rail and fixed some damage ,still cleaning that up .allso got some wleding done on the drivers side of the bay and removed some stuff from the fire wall .its getting there ,but i have a ways togo .
i'm allso not chopping the top :sob i measured it out and well the only way i could fit in it would be with a nasty lean on ,lowered seat rails and a 2 inch chop ,kinda pointless for what its going to cost and you wouldnt even notice .so there goes that idea :noway so yeah
Happy Bday to me haha
tonight i'm going to throw tegs trailing arms and rear disk swap ,so i can take the civic **** and put it into storage ( i have no room here )
cheers[/QUOTE]
so i havent been upto much on the car guys ,woth work ,life and what not i just havent had time and or felt like working on it .
i did allmost all the sound **** off the passenger side floor and am allmost ready to finisht he drivers and then sand .this place doesnt have dry ice so i did it by hand with just a hammer and a flat screw driver (took forever) but its out
few pics of that
i allso finishedthe welding and cleaning up the passenger side of the bay ,ready for filler ,but need hardener (lost it in the move i think )allso did a patch on the driver frame rail and fixed some damage ,still cleaning that up .allso got some wleding done on the drivers side of the bay and removed some stuff from the fire wall .its getting there ,but i have a ways togo .
i'm allso not chopping the top :sob i measured it out and well the only way i could fit in it would be with a nasty lean on ,lowered seat rails and a 2 inch chop ,kinda pointless for what its going to cost and you wouldnt even notice .so there goes that idea :noway so yeah
Happy Bday to me haha
tonight i'm going to throw tegs trailing arms and rear disk swap ,so i can take the civic **** and put it into storage ( i have no room here )
cheers[/QUOTE]
#50
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: in the sticks, manitoba, canada
Posts: 1,072
Likes: 0
Received 0 Likes
on
0 Posts
Re: (JKGONZALEZ3)
i got this exedy stage 1 clutch today for 225 allmost new a bit of wear ,but guy says only 2000 km's on it (shrugs)
and i got this tranny for 75 bucks ,like a package deal for both ,says it grinds a bit around 5000k when shifting into 3rd i think he said ,but nothing when taken it easy
and i got this tranny for 75 bucks ,like a package deal for both ,says it grinds a bit around 5000k when shifting into 3rd i think he said ,but nothing when taken it easy