post ur times of b18a/b motor in a EG
#2
Banned
Join Date: Aug 2001
Location: Dirty Bird land, GA
Posts: 1,435
Likes: 0
Received 0 Likes
on
0 Posts
Re: post ur times of b18a/b motor in a EG (wm5holla)
My friend runs 13.6 N/A and 12.6 w/ 150 shot. Stock block, crower cams, crower valvetrain, 3" thermal exhaust. Its a 92-95 CX.
#6
Re: post ur times of b18a/b motor in a EG ( (wm5holla)
Well it's not an EG but my friend has a 91 dx crx(maybe about 250 pounds less than a cx eg?) with a b18a1 with a ractive intake made for the stock dx motor, a chikara header and a ractive exhaust. On his girls stock sel sol rims with drag radials ran a 9.6 in the 1/8 with lots of spinning in first and a little in second. AND that was his first time at the track. That's pretty good if u ask me. He was spanking all the egs out there with modded b16's (not dissing b16's by any means). Non vtec b18's arent slow...as some people make them out to be.
Drew
Drew
#7
Re: post ur times of b18a/b motor in a EG (blykins)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by blykins »</TD></TR><TR><TD CLASS="quote">My friend runs 13.6 N/A and 12.6 w/ 150 shot. Stock block, crower cams, crower valvetrain, 3" thermal exhaust. Its a 92-95 CX.</TD></TR></TABLE>
13.6 with an LS motor in a hatch? call me crazy, but i don't buy that one, thats type r hatch kinda times...
13.6 with an LS motor in a hatch? call me crazy, but i don't buy that one, thats type r hatch kinda times...
Trending Topics
#8
senior gold member
Join Date: Apr 2002
Location: dont fake, the funk, earf
Posts: 4,090
Likes: 0
Received 0 Likes
on
0 Posts
Re: post ur times of b18a/b motor in a EG (187)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 187 »</TD></TR><TR><TD CLASS="quote">
13.6 with an LS motor in a hatch? call me crazy, but i don't buy that one, thats type r hatch kinda times...</TD></TR></TABLE>I would say its doable if the car is light enough and and he did say it had cams and stuff.
13.6 with an LS motor in a hatch? call me crazy, but i don't buy that one, thats type r hatch kinda times...</TD></TR></TABLE>I would say its doable if the car is light enough and and he did say it had cams and stuff.
#9
Banned
Join Date: Aug 2001
Location: Dirty Bird land, GA
Posts: 1,435
Likes: 0
Received 0 Likes
on
0 Posts
Re: post ur times of b18a/b motor in a EG (187)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 187 »</TD></TR><TR><TD CLASS="quote">
13.6 with an LS motor in a hatch? call me crazy, but i don't buy that one, thats type r hatch kinda times...</TD></TR></TABLE>
It has a built head.
13.6 with an LS motor in a hatch? call me crazy, but i don't buy that one, thats type r hatch kinda times...</TD></TR></TABLE>
It has a built head.
#10
Honda-Tech Member
Re: post ur times of b18a/b motor in a EG (JV)
My friends 96 ran 15.3 @ 88. Probably weighed 2300 without driver. My 92 ran 14.9 on its best day downhill with the wind behind it. The motor was old though and was pretty ragged. I bet you could hang out a 14.6 with a great launch and a 2000lb car.
#12
Member
Join Date: Apr 2002
Location: hehehe, STOP.., that tickles, usa
Posts: 1,513
Likes: 0
Received 0 Likes
on
0 Posts
Re: post ur times of b18a/b motor in a EG (blykins)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by blykins »</TD></TR><TR><TD CLASS="quote">My friend runs 13.6 N/A and 12.6 w/ 150 shot. Stock block, crower cams, crower valvetrain, 3" thermal exhaust. Its a 92-95 CX.</TD></TR></TABLE>
i find that hard to believe
i find that hard to believe
#14
Thread Starter
Join Date: Oct 2002
Location: not far from brunswick, NJ, usa
Posts: 1,361
Likes: 0
Received 0 Likes
on
0 Posts
Re: (NMcivicEF)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NMcivicEF »</TD></TR><TR><TD CLASS="quote">VTEC isnt everything.</TD></TR></TABLE> ENUFF SAID
#16
Banned
Join Date: Aug 2001
Location: Dirty Bird land, GA
Posts: 1,435
Likes: 0
Received 0 Likes
on
0 Posts
Re: post ur times of b18a/b motor in a EG (allmtr)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by allmtr »</TD></TR><TR><TD CLASS="quote">
i find that hard to believe</TD></TR></TABLE>
Why? THe car weighs 2000lbs and its on slicks.
i find that hard to believe</TD></TR></TABLE>
Why? THe car weighs 2000lbs and its on slicks.
#18
Honda-Tech Member
Join Date: Jul 2002
Location: ca
Posts: 1,627
Likes: 0
Received 0 Likes
on
0 Posts
Re: post ur times of b18a/b motor in a EG (jdm_ef9)
im going to the track this week..
94 vx hatch
b18b
itr 3 inch aem intake cold air
open header
bfg g force dr tires
maybe dc 4 2 1 (if friend let me barow)
stripe passenger and rear seats
will keep you guys updated.
Modified by TEAM JSJ at 10:36 PM 7/6/2003
94 vx hatch
b18b
itr 3 inch aem intake cold air
open header
bfg g force dr tires
maybe dc 4 2 1 (if friend let me barow)
stripe passenger and rear seats
will keep you guys updated.
Modified by TEAM JSJ at 10:36 PM 7/6/2003
#19
Honda-Tech Member
Join Date: Sep 2002
Location: stevens point, WI, 54481
Posts: 2,940
Likes: 0
Received 0 Likes
on
0 Posts
Re: post ur times of b18a/b motor in a EG (blykins)
everyone else with this engine/car setup is running 15.00-14.50. But your friends majicaly runs 13.6 with mostly cams (because springs and retainers don't make HP)
Yah....
Yah....
#20
Honda-Tech Member
Join Date: Feb 2003
Location: The boo, NM
Posts: 413
Likes: 0
Received 0 Likes
on
0 Posts
Re: post ur times of b18a/b motor in a EG (snowseeker)
Go to the all motor LS discussion. There are people in there that have ran 12's on stock bottom end LS's.
Modified by NMcivicEF at 12:41 AM 7/7/2003
Modified by NMcivicEF at 12:41 AM 7/7/2003
#22
Honda-Tech Member
Join Date: Feb 2003
Location: The boo, NM
Posts: 413
Likes: 0
Received 0 Likes
on
0 Posts
Re: post ur times of b18a/b motor in a EG (wm5holla)
here it is> https://honda-tech.com/zerothread?id=520581
#23
Honda-Tech Member
92 civic VX
-b18b1/ls tranny
-i/h/e
-full interior
-shitty bald tires
14.826@91.xx mph.......i had a 2.2x 60'
-b18b1/ls tranny
-i/h/e
-full interior
-shitty bald tires
14.826@91.xx mph.......i had a 2.2x 60'
#24
Honda-Tech Member
Join Date: Aug 2001
Location: manakin sabot, va, us
Posts: 4,083
Likes: 0
Received 0 Likes
on
0 Posts
Re: (NMcivicEF)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NMcivicEF »</TD></TR><TR><TD CLASS="quote">VTEC isnt everything.</TD></TR></TABLE>