Bluehbcivic'sCRX H2B all motor street/drag race car progress
#126
Honda-Tech Member
Thread Starter
re: Bluehbcivic'sCRX H2B all motor street/drag race car progress
Same motor i made 11.33@121.5mph
These cams are for my 89x95 motor but im gonna try them vs my pro2 on my stock bottom end
I have to weigh my car again, i think i reached my weigh goal to have some room to put weigh in strategic places, plus i want to improve aero alot! Undertray/diffuser, 3 piece front end carbon fiber + +
These cams are for my 89x95 motor but im gonna try them vs my pro2 on my stock bottom end
I have to weigh my car again, i think i reached my weigh goal to have some room to put weigh in strategic places, plus i want to improve aero alot! Undertray/diffuser, 3 piece front end carbon fiber + +
#129
Honda-Tech Member
Thread Starter
#130
re: Bluehbcivic'sCRX H2B all motor street/drag race car progress
Very cool Max. I'm a little jealous... hope that is okay.
I didn't think Exospeed was making them... or even in business at all anymore. Hmmm? Since you have the molds, will you be making more 3 piece fronts? Not really in the market at the moment, but maybe in a little while.
On another note, I can't wait to see how you do this season.
I didn't think Exospeed was making them... or even in business at all anymore. Hmmm? Since you have the molds, will you be making more 3 piece fronts? Not really in the market at the moment, but maybe in a little while.
On another note, I can't wait to see how you do this season.
#131
Honda-Tech Member
Thread Starter
re: Bluehbcivic'sCRX H2B all motor street/drag race car progress
i bought a used exospeed front end, its okay im "jealous" of some other cars too haha
nah my boy wont make any more sorry!
nah my boy wont make any more sorry!
#133
Honda-Tech Member
Thread Starter
#135
re: Bluehbcivic'sCRX H2B all motor street/drag race car progress
woa! nice stuff. Why did you switch to the f20B, and what mods have you done to it? It is running really good.
#136
Honda-Tech Member
Thread Starter
re: Bluehbcivic'sCRX H2B all motor street/drag race car progress
Thanks!!
Injector problem contaminated my oil by running a very rich air fuel mixture resulting in toasted main bearings on the h23a
I had not much money for another engine, someone came in with this and i decided to give it a shot iva always loved these engines
Moda are valve spring/retainer because stock floats at 8750rpms, oeak power is at 8700
My cusom intake manifold and the plm header !
Injector problem contaminated my oil by running a very rich air fuel mixture resulting in toasted main bearings on the h23a
I had not much money for another engine, someone came in with this and i decided to give it a shot iva always loved these engines
Moda are valve spring/retainer because stock floats at 8750rpms, oeak power is at 8700
My cusom intake manifold and the plm header !
#138
Honda-Tech Member
Thread Starter
#140
re: Bluehbcivic'sCRX H2B all motor street/drag race car progress
Do you know anywhere I can purchase this intake manifold from ? Or would you know a direct link? Any info would help thanks
#141
Honda-Tech Member
Thread Starter
#142
#148
Honda-Tech Member
Thread Starter
re: Bluehbcivic'sCRX H2B all motor street/drag race car progress
This year i was using a stock f20b longblock except for valvespring and retainers
85x88 never pulled the head
B16 gearing with 4.785 FD
85x88 never pulled the head
B16 gearing with 4.785 FD
#149
Honda-Tech Member
re: Bluehbcivic'sCRX H2B all motor street/drag race car progress
Bluehbcivic... can you clear up a few things for me... I am enjoying your build here. I am just trying to get an idea of what you have done since day one. I am not sure where the F20B motor was replaced and power and torque on it....
If you can clear this up from when it was comletely stock...
Motor: What was done over stock: How much whp and torque: 1/4 mile times:
A fellow H23AV BT Crx member this was back in like 2006 or so... Stock bolt ons made 217 whp and 174 trq M2B4. Never dialed her in at the track
If you can clear this up from when it was comletely stock...
Motor: What was done over stock: How much whp and torque: 1/4 mile times:
A fellow H23AV BT Crx member this was back in like 2006 or so... Stock bolt ons made 217 whp and 174 trq M2B4. Never dialed her in at the track
#150
Honda-Tech Member
Thread Starter
re: Bluehbcivic'sCRX H2B all motor street/drag race car progress
2012: stock longblock and few travk experience/no car work 218whp 180wtq 12.05@112mph 2050lb
2013: stock bottom end with pro1 cams 235whp 11.5@118mph 2050lb
2014: stock bottom h23a ported head amd pro2 cams 250whp 11.33@121.57mph 2050lb
2015 stock longblock f20b with valvespring/retainer 235whp 11.26@120.75mph 1950lb
2013: stock bottom end with pro1 cams 235whp 11.5@118mph 2050lb
2014: stock bottom h23a ported head amd pro2 cams 250whp 11.33@121.57mph 2050lb
2015 stock longblock f20b with valvespring/retainer 235whp 11.26@120.75mph 1950lb