►► March - April ►► All Motor Classifieds
#1
moderator emeritus
Thread Starter
►► March - April ►► All Motor Classifieds
Rules
- Each post must be started with FS OR WTB
- Please do not reply or quote posts in this thread, PM for all questions.
- Please do not post/type in ALL CAPS
What you CAN post in this thread:
- Engines/Any engine component
- Transmissions/Any drivetrain parts
- Electrical components such as ECU'S, ETC
What you CANNOT post in this thread
- No vehicles for sale
- No wheels
- No Brake or Suspension components
- No interior/exterior parts
- NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
Violations of these basic rules, and your post may be deleted and lose participation in this thread.
- Each post must be started with FS OR WTB
- Please do not reply or quote posts in this thread, PM for all questions.
- Please do not post/type in ALL CAPS
What you CAN post in this thread:
- Engines/Any engine component
- Transmissions/Any drivetrain parts
- Electrical components such as ECU'S, ETC
What you CANNOT post in this thread
- No vehicles for sale
- No wheels
- No Brake or Suspension components
- No interior/exterior parts
- NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
Violations of these basic rules, and your post may be deleted and lose participation in this thread.
#2
moderator emeritus
Thread Starter
Re: ►► March - April ►► All Motor Classifieds
Innovative 85A engine mounts for H22 97+ Prleude - 200 shipped
Competition Clutch H22 twin disc - 850 shipped - comes with a brand new flywheel
MFactory H22 5.15 Final Drive - 650 Shipped
MFactory H22 Helical LSD - 625 shipped
-- combine the FD and LSD for 1250 shipped. A 1500 dollar setup when new
Each of these are literally brand new and have less than 30 track passes with a majority of those passes being 1/8th mile
#3
Honda-Tech Member
Join Date: Aug 2009
Location: Baton Rouge,Louisiana
Posts: 7,635
Likes: 0
Received 3 Likes
on
3 Posts
Re: ►► March - April ►► All Motor Classifieds
WTB: Custom intake manifold for GSR HEAD.
Call or txt @ 225-384-1 four four 1
Email @ Derek@DDTECHCAMS.com
Call or txt @ 225-384-1 four four 1
Email @ Derek@DDTECHCAMS.com
#4
Re: ►► March - April ►► All Motor Classifieds
B series Parts FS. Located in Wichita KS. shipping stateside in usa included. paypal only.
-Skunk 2 Pro2 cams. installed, checked clearances and motor was parted out. Even has new cam seals on em. lolSOLD
-modified Performer X intake manifold. Did a DIY king's motorsports style mod. Cut 2" out of runners and welded plenum back on. comes with bolts and original stuff from box that I can find. ported to 68mm. GSR head. comes with 68mm tb250 shipped!
-NEW mfactory 1st 3.070 B series 98+ spec Itr120 shipped!
PM for info or call/text 316-516-9334
-Skunk 2 Pro2 cams. installed, checked clearances and motor was parted out. Even has new cam seals on em. lolSOLD
-modified Performer X intake manifold. Did a DIY king's motorsports style mod. Cut 2" out of runners and welded plenum back on. comes with bolts and original stuff from box that I can find. ported to 68mm. GSR head. comes with 68mm tb250 shipped!
-NEW mfactory 1st 3.070 B series 98+ spec Itr120 shipped!
PM for info or call/text 316-516-9334
Last edited by shanet90; 04-16-2013 at 12:10 PM.
#6
Honda-Tech Member
Join Date: Dec 2006
Location: Wichita, USA
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
Honda-Tech Member
Join Date: Nov 2000
Location: Culpeper Va
Posts: 1,433
Likes: 0
Received 0 Likes
on
0 Posts
Re: ►► March - April ►► All Motor Classifieds
I have for sale 52mm twm itb's for a b16/itr head
Has bosch style rail, blox vac manifold, tps. throttle cable, twm fpr, and liquid filled guage, thermo gasket
I am looking for 1000 shipped obo
Does not come with injectors!
Here are some pics not the greatest but can get better, they are still on the car and not pulling off until i get paid for them, they worked great for me I truthfully want to try the new skunk2 ultra manifold and 90mm tb.
Not looking for trades unless its that manifold.
pm me for contact I am located in Va and am willing to ship.
Has bosch style rail, blox vac manifold, tps. throttle cable, twm fpr, and liquid filled guage, thermo gasket
I am looking for 1000 shipped obo
Does not come with injectors!
Here are some pics not the greatest but can get better, they are still on the car and not pulling off until i get paid for them, they worked great for me I truthfully want to try the new skunk2 ultra manifold and 90mm tb.
Not looking for trades unless its that manifold.
pm me for contact I am located in Va and am willing to ship.
#9
Honda-Tech Member
iTrader: (3)
Join Date: Jan 2008
Location: NC
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Re: ►► March - April ►► All Motor Classifieds
Looking to sell my Scat 92mm crank never installed or used. Scat cranks are superior in quality as they are machined and inspected in U.S. and they source there forged steel from the U.K. not china . Sad to let it go , but things came upand priorities change .I also have the original box if you have any questions please ask. Asking 550 OBO
PLEASE NOTE THAT THE BROWN HAZY STUFF ON THE JOURNALS AND CRANK IS FROM FACTORY AND IT COMES OFF , I ASSUME ITS USED TO PREVENT ANY SURFACE RUST FROM FORMING DURING STORAGE AND HANDLING.
Text 760-936-2053
PLEASE NOTE THAT THE BROWN HAZY STUFF ON THE JOURNALS AND CRANK IS FROM FACTORY AND IT COMES OFF , I ASSUME ITS USED TO PREVENT ANY SURFACE RUST FROM FORMING DURING STORAGE AND HANDLING.
Text 760-936-2053
#10
Honda-Tech Member
iTrader: (3)
Join Date: Jan 2008
Location: NC
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Re: ►► March - April ►► All Motor Classifieds
Selling a GSR BARE block with matching main caps, girdle, and main bolts. I also have oil cooler water neck with thermostat housing. The block will.need to get re-honed to 81.5mm to get cleaned up on the #1 cylinder. No stripped holes or anything else wrong with the block . If you have any questions please let me know thx. Asking 185 OBO need this gone don't be afraid to send me reasonable offers .
JON 760-936-2053
]
JON 760-936-2053
]
#11
Re: ►► March - April ►► All Motor Classifieds
84.5mm JE 12.5 compression pistons bnib 400FIRM
rs machine pistons itr spec 84.5 brand new 275obo
text me at 7816062829
rs machine pistons itr spec 84.5 brand new 275obo
text me at 7816062829
#12
Honda-Tech Member
iTrader: (4)
For Sale!!!! =)
Hello Folks, It has come to that day that I am actually parting out my racecar. I thought this day would never come but unfortunately it has. Here is a chance for you to pick up some quality parts for great pricing. Everything has low miles on it (between 20-30 total miles) and was kept in exceptional condition. Take a look and feel free to inquire.
p.s. I will keep this thread up to date whenever I sell something, so far stuff has been moving. Feel free to make an offer and if it works, I will get the stuff ready to ship. Thanks in advance.
**::Attention, Email is key, joone.nijjar@gmail.com:**
* ITR Shift Linkage with a BNIB Energy Suspension bushing kit included
* 4.9 Gear-X Final Drive kit for B16 trans
* Momo Monte Carlo Steering Wheel with Mugen Horn Button and NRG Quick Release as a set.
* Seat Rails & Sliders for Driver and Passenger Side, EG/DC. Used with Side Mount Seats.
* H22 Manual Timing Tension Conversion Complete
* JDM h22 Distributor wired for MSD external Coil. Includes MSD spark plug wires.
* H22 ARP head stud Kit with Lube, used
* ::Low Miles:: H22 oil pump bought brand new, Pro-Drive high pressure Oil Pump Gear installed, Kiazenspeed Balance Shaft Eliminator Kit installed.
* 1996 JDM H22a closed deck block Sleeved with Darton replacement sleeves, 89mm bore.
* Skunk2 K series 74mm TB with sensors and IAC Block off plate.
* Golden Eagle Oil Sandwich Plate
****SOLD to a Fellow H-T'er**** Thanks "DrCRX"
* H22 Carrillo Rods
* 89mm 13.5:1 CP pistons with relocated wrist pin for use with H22 rods and H23 crank. (20-30 miles tops!!!)
****SOLD to a Fellow H-T'er**** Thanks "92frostwhtdb2"
* PLX Wideband with Gauge.
****SOLD to a Fellow H-T'er****
* Hydro B series Clutchmasters twin disc fx700 Clutch
* DSS level 2.9 B-series axles.
****SOLD to a Fellow H-T'er**** Thanks "92siracer"
* H22 Valve Cover properly baffled and vented. Only releases pressure, not a bunch of oil...
* Custom h2b Scattershield powdercoated Silver
****SOLD to a Fellow H-T'er**** Thanks "Souler"
* Billet Aluminum coolant overflow catch can.
* MSD SS blaster coil
* MSD Digital 6 Ignition System
****SOLD to a Fellow H-T'er**** Thanks "richboy84"
* B&R Catch Can with lines
****SOLD to a Fellow H-T'er**** Thanks "H2BJON"
* Skunk2 k20 Fuel Rail with -6 fitting for fuel in
****SOLD to a Fellow H-T'er**** Thanks "MyLilCivic"
* SSR stainless steel 4-1 race header with bottom exit megaphone for an h2b with an h22 head.
****SOLD to a Fellow H-T'er**** Thanks "weedstnr"
* KStuned h2b Oilpan with pick up and dipstick, no dings/dents/damage.
****SOLD to a Fellow H-T'er**** Thanks "fliplude95"
* Blox Racing EG/DC Traction Bar
* XS FPR with -6 fittings in black.
* H to D series alternator relocator bracket with Alternator and belt
* h22 Euro-R Single Row Crank Pulley
****SOLD to a Fellow H-T'er**** Thanks "lovitalracer"
* Bogart Pro-4 wheels and tires. (car always rested on Jackstands) 4x100
Fr: 24.5x8.5x13 M&H slicks on 13x8 wheels (Back spacing clears brakes as large as Integra GSR/LS/RS/GS
Rr: 24.5x3.6x13 M&H skinnies
****SOLD****
* STR70mm B/H/D TB with sensors-
****SOLD****
* Skunk2 H22 Pro series stage 3 Camshafts**
* Skunk2 H22 Pro Series Cam Gears**
* DNR Ported h22 Cylinder head, includes SKunk2 Valve Train and Supertech Flat Valves.**
****SOLD to a Fellow H-T'er**** *Thanks
* Autometer Oil Pressure Gauge with Sender Unit, Autometer Water Temp Gauge with Sender Unit, and carbon Fiber bezel with slot for one more gauge. Fits into Radio din or Climate Control Slot on EG.
****SOLD to a Fellow H-T'er**** Thanks
* ID725 injectors for a Honda K series engine with low miles as well.
****SOLD to a Fellow H-T'er**** Thanks
* Skunk2 Oil Cap
****SOLD to a Fellow H-T'er**** Thanks
* MFactory B16 LSD with bearings
Email is the key: joone.nijjar@gmail.com
p.s. I will keep this thread up to date whenever I sell something, so far stuff has been moving. Feel free to make an offer and if it works, I will get the stuff ready to ship. Thanks in advance.
**::Attention, Email is key, joone.nijjar@gmail.com:**
* ITR Shift Linkage with a BNIB Energy Suspension bushing kit included
* 4.9 Gear-X Final Drive kit for B16 trans
* Momo Monte Carlo Steering Wheel with Mugen Horn Button and NRG Quick Release as a set.
* Seat Rails & Sliders for Driver and Passenger Side, EG/DC. Used with Side Mount Seats.
* H22 Manual Timing Tension Conversion Complete
* JDM h22 Distributor wired for MSD external Coil. Includes MSD spark plug wires.
* H22 ARP head stud Kit with Lube, used
* ::Low Miles:: H22 oil pump bought brand new, Pro-Drive high pressure Oil Pump Gear installed, Kiazenspeed Balance Shaft Eliminator Kit installed.
* 1996 JDM H22a closed deck block Sleeved with Darton replacement sleeves, 89mm bore.
* Skunk2 K series 74mm TB with sensors and IAC Block off plate.
* Golden Eagle Oil Sandwich Plate
****SOLD to a Fellow H-T'er**** Thanks "DrCRX"
* H22 Carrillo Rods
* 89mm 13.5:1 CP pistons with relocated wrist pin for use with H22 rods and H23 crank. (20-30 miles tops!!!)
****SOLD to a Fellow H-T'er**** Thanks "92frostwhtdb2"
* PLX Wideband with Gauge.
****SOLD to a Fellow H-T'er****
* Hydro B series Clutchmasters twin disc fx700 Clutch
* DSS level 2.9 B-series axles.
****SOLD to a Fellow H-T'er**** Thanks "92siracer"
* H22 Valve Cover properly baffled and vented. Only releases pressure, not a bunch of oil...
* Custom h2b Scattershield powdercoated Silver
****SOLD to a Fellow H-T'er**** Thanks "Souler"
* Billet Aluminum coolant overflow catch can.
* MSD SS blaster coil
* MSD Digital 6 Ignition System
****SOLD to a Fellow H-T'er**** Thanks "richboy84"
* B&R Catch Can with lines
****SOLD to a Fellow H-T'er**** Thanks "H2BJON"
* Skunk2 k20 Fuel Rail with -6 fitting for fuel in
****SOLD to a Fellow H-T'er**** Thanks "MyLilCivic"
* SSR stainless steel 4-1 race header with bottom exit megaphone for an h2b with an h22 head.
****SOLD to a Fellow H-T'er**** Thanks "weedstnr"
* KStuned h2b Oilpan with pick up and dipstick, no dings/dents/damage.
****SOLD to a Fellow H-T'er**** Thanks "fliplude95"
* Blox Racing EG/DC Traction Bar
* XS FPR with -6 fittings in black.
* H to D series alternator relocator bracket with Alternator and belt
* h22 Euro-R Single Row Crank Pulley
****SOLD to a Fellow H-T'er**** Thanks "lovitalracer"
* Bogart Pro-4 wheels and tires. (car always rested on Jackstands) 4x100
Fr: 24.5x8.5x13 M&H slicks on 13x8 wheels (Back spacing clears brakes as large as Integra GSR/LS/RS/GS
Rr: 24.5x3.6x13 M&H skinnies
****SOLD****
* STR70mm B/H/D TB with sensors-
****SOLD****
* Skunk2 H22 Pro series stage 3 Camshafts**
* Skunk2 H22 Pro Series Cam Gears**
* DNR Ported h22 Cylinder head, includes SKunk2 Valve Train and Supertech Flat Valves.**
****SOLD to a Fellow H-T'er**** *Thanks
* Autometer Oil Pressure Gauge with Sender Unit, Autometer Water Temp Gauge with Sender Unit, and carbon Fiber bezel with slot for one more gauge. Fits into Radio din or Climate Control Slot on EG.
****SOLD to a Fellow H-T'er**** Thanks
* ID725 injectors for a Honda K series engine with low miles as well.
****SOLD to a Fellow H-T'er**** Thanks
* Skunk2 Oil Cap
****SOLD to a Fellow H-T'er**** Thanks
* MFactory B16 LSD with bearings
Email is the key: joone.nijjar@gmail.com
Last edited by DSRxCandyh2bEG; 04-09-2013 at 08:00 PM.
#16
Re: ►► March - April ►► All Motor Classifieds
H22 head
Skunk2 oversized flat faced valves
Skunk2 dual valve springs, retainers, and bases
Head is complete and never been ran $500
Brand new in the box skunk2 pro 2 cams $500
H23 block
Brand new type s pistons
Arp rod bolts
New oem oil pump
Ks tuned tensioner setup
Ks tuned balance shaft eliminator
Block is assembled and has never been ran $500
If interested text me and I will send you photos quickly
Prices do not include shipping or PayPal fees
860 878 5792
Skunk2 oversized flat faced valves
Skunk2 dual valve springs, retainers, and bases
Head is complete and never been ran $500
Brand new in the box skunk2 pro 2 cams $500
H23 block
Brand new type s pistons
Arp rod bolts
New oem oil pump
Ks tuned tensioner setup
Ks tuned balance shaft eliminator
Block is assembled and has never been ran $500
If interested text me and I will send you photos quickly
Prices do not include shipping or PayPal fees
860 878 5792
#17
Honda-Tech Member
Join Date: Jul 2008
Location: CRX.XXX
Posts: 310
Likes: 0
Received 0 Likes
on
0 Posts
Re: ►► March - April ►► All Motor Classifieds
I am willing to ship all parts, all price are OBO (make me a reasonable offer!).
All shipping prices are for the mainland USA.
Send me a message or shoot me a text @ 954-937-897three if you want a faster response.
Si/DX Gear Stacks w/Carbon Synchros- $350/shipped
Has all new carbon synchros from SynchroTech. I also have the Si diff and pretty much the whole transmission (trans will need clearances checked). Can get pictures if you want.
PM3 Head- $850/shipped
Will include valvetrain, but no cam (can include for $50 extra). Porting was done by Perfomance Porting out of Alaska (he's a sponsor on OneCamOnly, an active member on DSO). It's a street head with a basic clean up on the intake side, more aggressive porting on the exhaust side, and some minor chamber work. 3-angle valve job, new valve seals. Stock valves, springs, retainers.
http://sphotos-b.xx.fbcdn.net/hphoto...91396039_n.jpg
http://sphotos-b.xx.fbcdn.net/hphoto...91057683_n.jpg
http://sphotos-b.xx.fbcdn.net/hphoto...51989072_n.jpg
NPR P29's -$80/shipped
30mm Compression Height, dome is estimated to be in the +5-7cc range.
http://sphotos-b.xx.fbcdn.net/hphoto...11092102_n.jpg
Performer X for D16Z6- $300/shipped
Just the bare manifold and the fittings if I can find them.
http://sphotos-b.xx.fbcdn.net/hphoto...09269231_n.jpg
^Valve cover and header will be for sale if the other parts sell.
All shipping prices are for the mainland USA.
Send me a message or shoot me a text @ 954-937-897three if you want a faster response.
Si/DX Gear Stacks w/Carbon Synchros- $350/shipped
Has all new carbon synchros from SynchroTech. I also have the Si diff and pretty much the whole transmission (trans will need clearances checked). Can get pictures if you want.
PM3 Head- $850/shipped
Will include valvetrain, but no cam (can include for $50 extra). Porting was done by Perfomance Porting out of Alaska (he's a sponsor on OneCamOnly, an active member on DSO). It's a street head with a basic clean up on the intake side, more aggressive porting on the exhaust side, and some minor chamber work. 3-angle valve job, new valve seals. Stock valves, springs, retainers.
http://sphotos-b.xx.fbcdn.net/hphoto...91396039_n.jpg
http://sphotos-b.xx.fbcdn.net/hphoto...91057683_n.jpg
http://sphotos-b.xx.fbcdn.net/hphoto...51989072_n.jpg
NPR P29's -$80/shipped
30mm Compression Height, dome is estimated to be in the +5-7cc range.
http://sphotos-b.xx.fbcdn.net/hphoto...11092102_n.jpg
Performer X for D16Z6- $300/shipped
Just the bare manifold and the fittings if I can find them.
http://sphotos-b.xx.fbcdn.net/hphoto...09269231_n.jpg
^Valve cover and header will be for sale if the other parts sell.
#18
Re: ►► March - April ►► All Motor Classifieds
For sale
Skunk 2 pro2 cams and pro series gears. Used for 1700 miles. Degreed by Don Flores. Asking 525 shipped. Text or call me for pictures/info nine 41 nine 14 32 nine 6
Skunk 2 pro2 cams and pro series gears. Used for 1700 miles. Degreed by Don Flores. Asking 525 shipped. Text or call me for pictures/info nine 41 nine 14 32 nine 6
#20
Honda-Tech Member
iTrader: (3)
Join Date: Jan 2008
Location: NC
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Re: ►► March - April ►► All Motor Classifieds
Jon
760-936-2053
Up fs is my mint skunk2 pro 1 cams for b series . I had these in my motor for about 1300 miles, I used high quality Torco sr5 oil with zinc additive. These cams came out of my motor which was healty. I am selling them because I am upgrading to skunk2 pro 2 cams.if you have any further questions or concerns please reach me via text. I am asking 450.00 .
updated pics
760-936-2053
Up fs is my mint skunk2 pro 1 cams for b series . I had these in my motor for about 1300 miles, I used high quality Torco sr5 oil with zinc additive. These cams came out of my motor which was healty. I am selling them because I am upgrading to skunk2 pro 2 cams.if you have any further questions or concerns please reach me via text. I am asking 450.00 .
updated pics
#22
Honda-Tech Member
iTrader: (1)
Re: ►► March - April ►► All Motor Classifieds
For sale, my ferrea roller rocker setup for B-series. These have been sitting in my garage for years and I only used them for less then 2000kms. I have both the rockers and the camshafts I just can't remember what duration/lift the camshafts are.
Asking $1250 Canadian OBO
More information:
References: Aluminum-Magnesium CNC machined Stock rocker assembly mass: 252 grams. Ferrea rocker assembly mass: 135 grams (46% less mass than factory rockers) Stock fulcrum mass: 110 grams. Ferrea fulcrum mass: 65
Can to be used with Ferrea, stock or any aftermarket camshafts.
Uses center lobe only, must use stand alone ECU tuning system. To work properly. you must disconnect the V-Tec function
PM if you are interested or have any more questions. I can also provide vouch threads from other forums if needed.
Images
Asking $1250 Canadian OBO
More information:
References: Aluminum-Magnesium CNC machined Stock rocker assembly mass: 252 grams. Ferrea rocker assembly mass: 135 grams (46% less mass than factory rockers) Stock fulcrum mass: 110 grams. Ferrea fulcrum mass: 65
Can to be used with Ferrea, stock or any aftermarket camshafts.
Uses center lobe only, must use stand alone ECU tuning system. To work properly. you must disconnect the V-Tec function
PM if you are interested or have any more questions. I can also provide vouch threads from other forums if needed.
Images
#23
Honda-Tech Member
Join Date: Nov 2003
Location: SE, PA, usa
Posts: 1,743
Likes: 0
Received 0 Likes
on
0 Posts
Re: ►► March - April ►► All Motor Classifieds
B series Evolution Industries cam gears. Serrated teeth every degree keep them locked in place once tightened. $100 shipped
#24
Re: ►► March - April ►► All Motor Classifieds
Forsale
Goin a different route i have for sale a complete b16 head that came off a b20vtec build, comes with itr manifold, itr dual valve springs and retainer, civic type r intake cam and gsr exhaust cam, will come wit dizzy also but minus the throttle body and fuel rail and injectors... The ctr cam is in mint condition, i paid 500 for it new last year so dont low ball me, everything in good working condition just slap it on a block and go..
B16 head - 350
Itr manifold - 150
Ctr n gsr cam - 400
Dizzy - 150
Or everything for 900
Text me at 61291652fourone
Dont know how to post pictures text me for them
Goin a different route i have for sale a complete b16 head that came off a b20vtec build, comes with itr manifold, itr dual valve springs and retainer, civic type r intake cam and gsr exhaust cam, will come wit dizzy also but minus the throttle body and fuel rail and injectors... The ctr cam is in mint condition, i paid 500 for it new last year so dont low ball me, everything in good working condition just slap it on a block and go..
B16 head - 350
Itr manifold - 150
Ctr n gsr cam - 400
Dizzy - 150
Or everything for 900
Text me at 61291652fourone
Dont know how to post pictures text me for them