1 2 NV

im looking for complete cam specs. someones got to have degreed these cams before and about the only thing ive seen posted was centerlines.

Dan Ruddock

http://www.junauto.co.jp/produ...ml?en

1 2 NV

that doesnt show valve opening and closing cycles. as in the title, COMPLETE cam specs.

Dan Ruddock

Give me the lobe centers i know how to give you the numbers with that data. Dan

1 2 NV

i was told 110 degrees both IN and EX but a very good head porter said that didnt sound right to him.

Dan Ruddock

Doesn't sound right to me either. Also it is possible for the centers to be different on the primaries than the vtec lobes. The stock centers I have seen were different on the ex. and in. Dan

1 2 NV

i wish i could help you out but i just dont know unfortunately. thats why i posted up on here.

97CTR

In a few weeks when I get my block back from Benson's I will be degreeing my JUN3's. Probably to far away to wait for my info, but I'll post it up when I do.

I have searched for specs also and have not had any luck.

1 2 NV

i hope to be assembling my block next week. got the shortblock done, waiting on the head.
i did degree the cams 2 years ago when i first got my 2L together. at +1, +1 the cams lined up perfectly to the crank. my head has been milled and my block has been decked. i just did it based on a 110 degree cam centerline though. dont know what the true actual centerlines were. those were specs given to me from a authorized JUN dealer if memory serves me right.

dax-es

Here are the specs that I was given by JUN when I bought their cams as measured on the primary lobes (4.6mm INT / 6mm EXH lift) -

Part# 1004M-H003 (INT)
- 1mm lift at 32° ABDC
- 110° lobe centre
- 1mm lift at 8° ATDC

Part# 1004M-H103 (EXH)
- 1mm lift at 8° BTDC
- 110° lobe centre
- 1mm lift at 32° BBDC

Matty.

bump for some good info to know.

jt-sport

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dax-es &raquo;</TD></TR><TR><TD CLASS="quote">Here are the specs that I was given by JUN when I bought their cams as measured on the primary lobes (4.6mm INT / 6mm EXH lift) -

Part# 1004M-H003 (INT)
- 1mm lift at 32° ABDC
- 110° lobe centre
- 1mm lift at 8° ATDC

Part# 1004M-H103 (EXH)
- 1mm lift at 8° BTDC
- 110° lobe centre
- 1mm lift at 32° BBDC</TD></TR></TABLE>

whatta tiny cam 240 degree at 1mm?? i think it was supposed to be the primaries lobe right?

B18C1_POWER

anyone knows the spec's of the blox hsl COMPETITION series cams? I found the specs of the tuner series, let me know..