who00knows

The exhaust cam has a C on it and the intake cam has a J on it.


Are these silver marks above the retainers normal????



Overview


Power Enterprise y0! ( Im assuming....this is what got me started on the whole thing....why have one of these with a stock valvetrain)


Stock Cam Gears.....


Retainer.....


HKS Plugs...BADDA BLING

1 2 NV

this was covered last week. u need to look at the cams for identifying marks (ie the rings around the end of the cam) then look at the distributor cam holder for some green paint. it may or may not b there, it does wash off with superclean and or simple green. i know because mine did. lastly look at the color of the paint on the valve springs. search though and u will find ur answer.

who00knows

thanks...i searched...I only saw blue paint on the exhaust valve springs..........no green paint anywhere......

badCRX

yellow valve springs on the other side of the head.

6SPD_EK

iTrader: (2)

blue on the exhaust springs = ITR yellow on the intake springs = ITR...do you see any signs of green paint near the dizzy on the head? to identify cams if OEM


The intake ports should have a lighter shade of silver, from being ported as seen here:


and as stated above there is a dab of green paint where the distributor mounts to the ITR head, but this isn't a sure way of telling either, because the paint can be washed/rubbed off. (can be seen from looking at the top of the head towards the back (intake manifold)


"PR3-x WILL NOT DESIGNATE AN ITR HEAD"
The PR3-1,2,3,4, etc. is a shared part number between ITR & B16A heads. It is NOT a sure way of distinguishing an ITR from B16 head, at all.

info from KATMAN


Modified by adirondackR at 7:58 AM 3/4/2004

GSRswapandslow.

just gimmie an HKS sparkplug allready

but, take out the cams....check them

SiR Inspired ED7

iTrader: (1)

Bringing ths back-up from the dead, My friend is selling an itr head it has the intake manifold and tb. I havent looked into the valve springs in other words the internals. I was reading that they have diffrent cam caps than the b16 head, Is this true? If so whats the diffrence in the cam caps because I want to determine if it is a real itr head.

DonF

Not cam caps, cam rails. Early B16 are cast "r"'s are forged likr GSR's.

MikeSarr_GSR

thats an interesting tidbit of info

AllMotorRandy

I believe true ITR heads have the bowls ported on the intake side from the factory.....



They also have lighter weight valves. Notice how they're thinner towards the big end of the valve.......



Hope this helps!