I just ordered my Header Tech header.
#1
Thread Starter
Join Date: Nov 2003
Location: El Paso, TX
Posts: 304
Likes: 0
Received 0 Likes
on
0 Posts
I just ordered my Header Tech header.
I just ordered the 1.8ltr stainles steel steppeed header with merge collector. This will be going into an Ls/Vtec with about 12:1 compression. Full ported Alaniz head with competition headwork with skunk2 stag2 cams and skunk2 valvetrain. Along with an STR 70mm TB, skunk2 manifold, hondata manifold gasket, rc 310injectors, new ACT clutch type-r flywheel, B16 tranny, All tuned together with my hondata s200 unit. Going into my gutted 95eg hatch... Hoping to hit the 200hp mark with a good tune, what do you guys think?
#2
Re: I just ordered my Header Tech header. (tnsxsear1)
sounds pretty sick man, what's your bottom end look like? oem components or forged? i'm lookin at that same header as well for my street del sol with an ls/vtec about the same compression as you got. I hope it does well but watch out for speed bumps, clearence isnt' all that great with headertech.
#3
Thread Starter
Join Date: Nov 2003
Location: El Paso, TX
Posts: 304
Likes: 0
Received 0 Likes
on
0 Posts
Re: I just ordered my Header Tech header. (b16vtecsol)
well bottem end is just oem parts with arp rod bolts. ls rods with jdm p30pistons. Its 11.7:1 with a stock b16 head, but mine is milled 30thousandths from Alaniz, so its at about 12:1 + or - If I can hit some good solid 13sec times, Than ill consider moving up to a b20 block with higher compression. and going with an MB allmotor frontend and doors.
#4
Honda-Tech Member
Join Date: Feb 2003
Location: Tampa, FL, usa
Posts: 584
Likes: 0
Received 0 Likes
on
0 Posts
it doesnt seem you should have any problems going deep into the 13's with that setup. 200 whp shouldn't be a problem either. ive got a headertech header and love it.
#5
Honda-Tech Member
Join Date: Sep 2002
Location: Baltimore, MD
Posts: 3,070
Likes: 0
Received 0 Likes
on
0 Posts
Re: (na200whp)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by na200whp »</TD></TR><TR><TD CLASS="quote">it doesnt seem you should have any problems going deep into the 13's with that setup. 200 whp shouldn't be a problem either. ive got a headertech header and love it.</TD></TR></TABLE>
If he runs on slicks, he will easily hit 12s.
As far as the header goes...good luck. It took HeaderTech 3 month's for me to get mine. Sander has already waited a month for his and still counting.... The wait is definately worth it. Oh, what are they charging for SS headers now?
If he runs on slicks, he will easily hit 12s.
As far as the header goes...good luck. It took HeaderTech 3 month's for me to get mine. Sander has already waited a month for his and still counting.... The wait is definately worth it. Oh, what are they charging for SS headers now?
#6
Thread Starter
Join Date: Nov 2003
Location: El Paso, TX
Posts: 304
Likes: 0
Received 0 Likes
on
0 Posts
Re: I just ordered my Header Tech header. (tnsxsear1)
Damn, Enzo quoted me at about 2-3weeks. I Emailed him all of my creditcard info and he said he wouldnt bill it until it shipped out. Seemed like a cool guy. Cany wait to get it.
#7
Re: I just ordered my Header Tech header. (tnsxsear1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tnsxsear1 »</TD></TR><TR><TD CLASS="quote">I just ordered the 1.8ltr stainles steel steppeed header with merge collector. This will be going into an Ls/Vtec with about 12:1 compression. Full ported Alaniz head with competition headwork with skunk2 stag2 cams and skunk2 valvetrain. Along with an STR 70mm TB, skunk2 manifold, hondata manifold gasket, rc 310injectors, new ACT clutch type-r flywheel, B16 tranny, All tuned together with my hondata s200 unit. Going into my gutted 95eg hatch... Hoping to hit the 200hp mark with a good tune, what do you guys think?</TD></TR></TABLE>
I have almost the same setup as you except it is sleeved to 84mm with JE 12.5.1 pistons. Im hoping my injectors are big enough. I ordered my HeaderTech header last week also. I spoke to Red over there seemed really cool. So far I give HeaderTech . I hope it gets here soon!! I dont see any problem with you hitting 200hp. Good luck man!!
I have almost the same setup as you except it is sleeved to 84mm with JE 12.5.1 pistons. Im hoping my injectors are big enough. I ordered my HeaderTech header last week also. I spoke to Red over there seemed really cool. So far I give HeaderTech . I hope it gets here soon!! I dont see any problem with you hitting 200hp. Good luck man!!
Trending Topics
#8
Honda-Tech Member
Join Date: Mar 2004
Location: North America
Posts: 606
Likes: 0
Received 0 Likes
on
0 Posts
Re: I just ordered my Header Tech header. (tnsxsear1)
Well guess what dude, he told me the same thing when I ordered it 5 weeks ago and he charged me. I called today and his telephone is disconnected. No header and no replies to my emails. I'm getting a little pissed off!
#9
Re: I just ordered my Header Tech header. (85mm LS VTEC)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 85mm LS VTEC »</TD></TR><TR><TD CLASS="quote">Well guess what dude, he told me the same thing when I ordered it 5 weeks ago and he charged me. I called today and his telephone is disconnected. No header and no replies to my emails. I'm getting a little pissed off!</TD></TR></TABLE>
****.. I called too. I got the same thing. Temporarally disconnected it says. WTF!! I left an email also. Hopefully I will get a reply. Can we keep this TTT untill everything is sorted out please. Getting a little annoyed myself!!
****.. I called too. I got the same thing. Temporarally disconnected it says. WTF!! I left an email also. Hopefully I will get a reply. Can we keep this TTT untill everything is sorted out please. Getting a little annoyed myself!!
#10
Junior Member
Join Date: Sep 2003
Location: Cerritos, CA, USA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Re: I just ordered my Header Tech header. (tnsxsear1)
i have a headertech header with a jdm itr in an eg
12.70's
If you make 200 true whp...i don't see a problem with 12's
12.70's
If you make 200 true whp...i don't see a problem with 12's
#12
Thread Starter
Join Date: Nov 2003
Location: El Paso, TX
Posts: 304
Likes: 0
Received 0 Likes
on
0 Posts
Re: I just ordered my Header Tech header. (Dieselboys MK3)
damn you guys are getting me scared now.. Im sure he will come through from the reputation ive seen of him so far. Its been all positive. Hopefully. -paul
#19
Damn it!! I have the wrong base map in my car. It is running like complete garbage.. My exhuast came in today. I need this Header to tune my car. Now Im going to have to tune it with a shitty comptech 4-2-1 header with a small-*** collector. Now I have to tune twice. More money out the window.
#21
Re: (b16vtecsol)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b16vtecsol »</TD></TR><TR><TD CLASS="quote">you guys should just make your own headers...you know...get 4 of those bendable straws and slap'em on there. instant 65 horse power!!! </TD></TR></TABLE>
No sympathy..
No sympathy..
#22
Re: (TGUNNER)
Bad customer service = loss of new customers. SMSP takes a long time but at least he is honest with people up front. I don't think most of the people ordering from Header Tech would order another product if Enzo said it was going to take 3 months. There really are not that many more options of quality headers at that price so he has that segment of the market cornered. Just be honest with people.
#23
Re: (Witty)
I HATE to join the list TOO but I ordered my B20VTEC header 2 1/2mths ago and I have not recieved mine.....The phone is not working and my credit card was changed 3wks ago!! ENZO no longer works at headertech and I have been dealing with RED but NO HEADER!!!!!!! I am a SUP with a major credit card company and I have already made the call to have my charge reversed!!!!! EACH OF YOU CAN DO THE SAME.... I WANT THE HEADER but the SERVICE is SH@@!!! NO contact NO F@@Kin' MONEY!!!!
RED SHOULD GIVE US ALL A BIG DISCOUNT or WE SHOULD CANCEL THE ORDERS AND DO A GROUP BUY with someone else that want's to make money and knows how to do business!!!! I NEED MY HEADER ASAP!!!!
RED SHOULD GIVE US ALL A BIG DISCOUNT or WE SHOULD CANCEL THE ORDERS AND DO A GROUP BUY with someone else that want's to make money and knows how to do business!!!! I NEED MY HEADER ASAP!!!!
#24
Re: I just ordered my Header Tech header. (tnsxsear1)