1.5Slowmatic

Finally came in. First ipression is damn for the money you cant beat this header. Came with all new gaskets, hardware, instructions, o2 extender and it just feels like a quality header when you hold it. Plus its made in the USA Its gonna need some portmatching as you can see but thats not a big deal at all. I payed 129 shipped for this from edelbrock. It was on sale

Ok, first off, specs are as follows. Primaries are 12in long, all 4. Secondaires, when looking down on it are 20in on the left and 22 on the right. The collector is 6 3/4" long. Primaries are 1 1/2 in Diameter with a step at the flange from 1 5/8 to 1 1/2 as you'll see pictured.Than taper at the merge to 2in. The secondaires are 1 3/4 and taper to 2 1/4 but are halfed it seems. Its odd but seems niffty









Heres the taper i was talking about



here you can see what i mean by it being halfed






ill see what ground clearance is like once its installed on the car

91' LS-VTEC

For under a 150, I'd throw one of those on my wagovan.

d112crzy

Any plans to get this thing dyno tested by itself or against anything else?

OH_1fstgsr

iTrader: (2)

When did Edelbrock start make D-Series headers? Or maybe I missed something.

potatostix

They have for awhile. Their older headers were a collaboration with JG and they were quite nice. They also were blown out on summit at a very similar price.

1.5Slowmatic

not sure on the dyno yet but i plan to atleast test it on the track. closest dyno to me is about 30mins and they charge 90 for 3 pulls, no AFR readout

1.5Slowmatic

heres a link to the store for anyone interested. It says black finish but you can clearly see this isn't black. I intend to wrap it as well before it goes on the car

http://store.edelbrock.com/hondauniversal.aspx

.Manny.

iTrader: (1)

I bought my b-series header during this blowout a few years ago for 140 Shipped. Not the best performing header on the market, but for $140, it does damn good

1.5Slowmatic

im not lookin to set records here, just gain some hp. So this will do the job just fine for the price

potatostix

Yeah, the D-series ones were 1-3/4 inch primaries. They're ****ing ridiculously big.