chewed rocker pics built motor... "blown motor pics"
04-10-2006, 07:46 AM
#3
Honda-Tech Member
Thread Starter
Re: chewed rocker pics built motor... "blown motor pics" (HotWheelz)
crower pro, Eibach series with +60 installed height retainers, and rockers machined to clear.
45k miles since installed, lash done suposedly every 8kmiles .. "never by me" motor was sold some years ago.. just got it back once she ran funny! ahha
45k miles since installed, lash done suposedly every 8kmiles .. "never by me" motor was sold some years ago.. just got it back once she ran funny! ahha
04-10-2006, 10:52 AM
#6
Honda-Tech Member
Re: chewed rocker pics built motor... "blown motor pics" (Dan Ruddock)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dan Ruddock »</TD></TR><TR><TD CLASS="quote">If only one cam lobe did this I would say check for plugged oil spray hole over that cam lobe. Dan</TD></TR></TABLE>
Word...Im with you on this one Dan
Word...Im with you on this one Dan
04-10-2006, 01:35 PM
#7
Honda-Tech Member
Join Date: Feb 2002
Location: land of the sheep, home of the hypocrite
Posts: 2,072
Likes: 0
Received 0 Likes
on
0 Posts
Re: chewed rocker pics built motor... "blown motor pics" (HotWheelz)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HotWheelz »</TD></TR><TR><TD CLASS="quote">bad LMA?</TD></TR></TABLE>
Does that rocker move smoothly? Perhaps that LMA started putting a lot of pressure on that rocker somehow?
Does that rocker move smoothly? Perhaps that LMA started putting a lot of pressure on that rocker somehow?
Trending Topics
04-10-2006, 02:51 PM
#8
Member
Re: chewed rocker pics built motor... "blown motor pics" (flyrod)
45,000 mi since installed. How many miles did the rockers have before that? 8500 RPM's you have used up your warranty on "race" parts.
04-10-2006, 05:31 PM
#9
Honda-Tech Member
Thread Starter
Re: chewed rocker pics built motor... "blown motor pics" (DonF)
parts list,
crower probillet rods, with 11.0 slugs, prodrive oilpump, on the bottom, bearings spun on the mains rods and pistons fine., portflow head, ferrea valves polydyne coated, crower eibach valvetrain, crower stage 3's, arp all around, single runner im, 68mm billet tb, aem CAI, unorthodox pulleys, no ps, or ac, clutchmasters 8pound, act extreme, lsd tranny. sad to see the mains took a dump.
yep 45k later... oh well... lost count after how many drag pass's it made after the first year
head was a 2000 prelude head, with 5 miles on it, before the install. lma's were also new. rockers were all clearanced for the intalled height, and skunk2 2 gears were indexed. when the bearings went, one piston hit two exaust valves.. tight specs. i think so
this was assemble by me in 2002.... hahaha so it's been a while.
crower probillet rods, with 11.0 slugs, prodrive oilpump, on the bottom, bearings spun on the mains rods and pistons fine., portflow head, ferrea valves polydyne coated, crower eibach valvetrain, crower stage 3's, arp all around, single runner im, 68mm billet tb, aem CAI, unorthodox pulleys, no ps, or ac, clutchmasters 8pound, act extreme, lsd tranny. sad to see the mains took a dump.
yep 45k later... oh well... lost count after how many drag pass's it made after the first year
head was a 2000 prelude head, with 5 miles on it, before the install. lma's were also new. rockers were all clearanced for the intalled height, and skunk2 2 gears were indexed. when the bearings went, one piston hit two exaust valves.. tight specs. i think so this was assemble by me in 2002.... hahaha so it's been a while.
Thread
Thread Starter
Forum
Replies
Last Post
