rare92gsr

not at all, the motor was daily driven in another car(integra) for over a year, and finally swapped over into this chasis for more fun. the car is driven here and there around town plus i drive it to local 1/8 mile track all the time, interior was gutted and exhaust removed to participate in allmotor pro class at IFO. no cutting and lexans involved at all.

Red Balut

thats what i wanted to hear.
pro2's, idle fine, daily driven 11 sec.

Do-Work

iTrader: (1)

very nice

mrbsponge

proper parts, proper assembly, and good tuning its a combo we at our shop have been working on to perfect a few different streetable/raceable motors that we can offer that have good power and good longevity.

We have countless track passes on this car, probably over 100 dyno pulls(as we used this motor to test a few headers and cams) and we toss radials on it and drive it all over town. have been using it for almost 2 years non stop.

DDTECH

Always good to support another all motor guy. I'm always cheering for this guy lol.

eksessiv

Nice job man.

MikeySpec

Props.

*internet slap on the *** - Good Game!

JayWest

99black_em1

do u mind sharing what u did to reduce the car's weight to 2000 with driver ?

EK9 CTR

To OP, what RPM are to revving to??? Great pass; simple build and a fantastic time... Is it hytech big tube or small tube??

JustOneOrTwoPosts

nice power figures and timeslips man. I see you're running some prototype rs machines 11.5 "*****" =p

rare92gsr

removed everything the the car including all seats and panel/carpet. dash remained and driver seat. as far as outside, remove rear bumper support and exhaust, the driver weighs 145lbs. the weight is jus guesstimate, not neccesary 2020 lbs, could be more, i went by weighing everything i removed and take it off the original weight of the car. its a civic dx also.

as far as rev, even though rev limit is set at 8900rpm, the car only saw around 8500rpm in each gear down the track.

95skunkedgsr

was that motor ever ran in the integra? what did she run if so

JDM809

very simple yet effective build. i like builds like these because it proves what i keep telling people. combination of the right parts will always produce great outcomes. i've seen people throw together builds with the most expensive parts out there and not do any research whether there combination will work together or not and end up with shitty outcomes. keep it up man... very nice build. post up some pics and more videos if possible.

allmotorb20v

stock rods with just arp rod bolts? Solid build that moves...

ohsnapzafingcu

iTrader: (2)

Sweet build and nice driving! How many miles are on the motor btw?

rare92gsr

the integra never ran at the track, it was a daily. lol

not too sure but the motor has at least over 10k miles

allmotorb20v

do you have the breakdown of the timeslip?

STLSLOW

very nice fast for more, or less stock B20

xbigpitax

nasty b20v, hope to see more vids of the car at the track

NAsapper

***** sick!

rare92gsr

don't hv the timeslip handy but i know its 1.62 60ft, 7.35@93 1/8th, 11.54@117 1/4 mile. i will try to find the timeslip

gt35rdanny

iTrader: (5)

nice build man!! i also have an similar build, just waiting on a tune.

b20vtek

Very similar to my time slip the only difference is that i went 7.22@94 at the 1/8th but other than that very similar. The car is running very strong best of luck to you guys.

hatchn1.9

wow...for the whp that car runs awsome....great build man