davidfillups

hi everyone

my car has done this only 3 times so far. what happens is im on the highway for about 10 min (above 4k rpm) and then i get off wait at a light and when i start back up the car treats 4k rpm as the redline. this has been the circumstance for all 3 occurances. if i turn my car off then back on again it stops doing it. Any ideas?

thanks

daddy

iTrader: (1)

if its and ep3 (aka si) your in the wrong section. check the RSX/EP3 section

if its a canadian si (aka US ex)
then its probably going into limp mode.

SHG_James

are you revving it when its not moving? if so there's a secondary rev limiter that engages when the car is not in motion

WhiteOnRice

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jamescardenas07 &raquo;</TD></TR><TR><TD CLASS="quote">are you revving it when its not moving? if so there's a secondary rev limiter that engages when the car is not in motion</TD></TR></TABLE>
Not on a k20a3.

Do you have a CEL?

ep3man

why and the hell does your car rev at 4k while cruising?

dc5RickK20

limp mode?
is your check engine light on?

K-ill-20

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dc5RickK20 &raquo;</TD></TR><TR><TD CLASS="quote">limp mode?
is your check engine light on?</TD></TR></TABLE>

I was thinking check engine light too.
May be a sensor that goes screwy.

WhiteOnRice

It blows my mind how often people post a problem and never bother checking back.

K-ill-20

lol, i think they may have trouble finding their own posts. lol. back when i was forum ignorant, i couldn't find my own posts either ! lol

Drew dc5

yeah it be a lot easier to answer/help with the issue if we had some more information.

C4st0r_Tr0y

Had this problem about a week ago.

your car is going into limp mode. Have you changed your oil lately? check you oil level.

I just changed my oil and it went away. Also try resetting your battery.

4angrybadgers

WhiteOnRice, 04-05 EP3s have a 5.5k standing limiter.

EJ6_Hatch

/\ yep... it's supposed to be a built in launch control

WhiteOnRice

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 4angrybadgers &raquo;</TD></TR><TR><TD CLASS="quote">WhiteOnRice, 04-05 EP3s have a 5.5k standing limiter.</TD></TR></TABLE>
Blame it on my 04/05 ignorance!

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EJ6_Hatch &raquo;</TD></TR><TR><TD CLASS="quote">/\ yep... it's supposed to be a built in launch control</TD></TR></TABLE>
I really doubt that.

EJ6_Hatch

doubt what?

http://en.wikipedia.org/wiki/Civic_Si

"Performance-wise, the ECU was slightly retuned to compensate for a lighter flywheel, and the launch limit RPM in neutral was dropped from 7,100 to 5,000 RPM."

I have a 2004, it's there... I just highly doubt this is what the OP's problem is

WhiteOnRice

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EJ6_Hatch &raquo;</TD></TR><TR><TD CLASS="quote">and the launch limit RPM in neutral was dropped from 7,100 to 5,000 RPM."
</TD></TR></TABLE>
7k "launch control" on an open diff FWD vehicle? LMAO. Besides, 6800 is the rev limit on 02/03, not 7100...

Please don't use wikipedia to "prove" anything. Wikipedia = opinon-pedia.

vtec.ftw

sounds like limp mode to me ...

EJ6_Hatch

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by WhiteOnRice &raquo;</TD></TR><TR><TD CLASS="quote">
7k "launch control" on an open diff FWD vehicle? LMAO. Besides, 6800 is the rev limit on 02/03, not 7100...

Please don't use wikipedia to "prove" anything. Wikipedia = opinon-pedia.</TD></TR></TABLE>

sigh... look...

they lowered it, to 5K on the 04-05... that's how the sentence is to be read.
and like I said, I own a 04 Si, and it has a 5K limiter when you are sitting still, so I'm not using Wiki for my information, just thought I would show you that I am not just pulling it out of my *******.

davidfillups

hey guys sorry for the lack of replies work has been a lil crazy lately.

anyway, yes the check engine light is on.

no im not reving while the car is not moving

no i dont have a CEL

ep3man: 80 on the highway in 5th is about 4k

usmc39273

You do have a check engine light but you don't have a CEL? If you're light is on it's like everyone is saying, limpmode. Last time it happened to me it was the O2 sensor.

EJ6_Hatch

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by davidfillups &raquo;</TD></TR><TR><TD CLASS="quote">hey guys sorry for the lack of replies work has been a lil crazy lately.

anyway, yes the check engine light is on.
no im not reving while the car is not moving

no i dont have a CEL

ep3man: 80 on the highway in 5th is about 4k</TD></TR></TABLE>

lmao

What do you think CEL stands for, mang?

SilverDC5Driver

no oil integras do that to wen there is very low oil

WhiteOnRice

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EJ6_Hatch &raquo;</TD></TR><TR><TD CLASS="quote">

sigh... look...

they lowered it, to 5K on the 04-05... that's how the sentence is to be read.
and like I said, I own a 04 Si, and it has a 5K limiter when you are sitting still, so I'm not using Wiki for my information, just thought I would show you that I am not just pulling it out of my *******. </TD></TR></TABLE>
Not saying it doesn't have it. I'm saying it's not for launch control.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EJ6_Hatch &raquo;</TD></TR><TR><TD CLASS="quote">/\ yep... it's supposed to be a built in launch control</TD></TR></TABLE>.

johnclaunch

Plug in your OBD-II reader and lookup the code.

I am betting that it will be a P05XX.

Any other warning lights illuminated? Does your speedo work correctly?

Did you check the oil level?

ALSO: 5.5K works well as a launch control. Something about full RPM at idle is bad from the B-series days? Don't know.

MONSTERek4

my car was doing the same i changed sparkplugs and it was coo then 4 days later i blow my motor lol