RXS-S 02 Front end shaking under high load during acceleration
#1
RXS-S 02 Front end shaking under high load during acceleration
I have a shimmy from my front end when I am under high load from the engine, when I let off the gas the shimmy stops. I have checked all of the engine and tranny mounts and they are fine. The cv joints are solid and my tires are balanced and the alignment is also good, the shaking and shimmy only happens during acceleration with no sound difference just the shake and it is very noticeable and as soon as I let off the gas it stops shaking.
Any thoughts on what can make that happen?
Any thoughts on what can make that happen?
#4
Honda-Tech Member
Re: RXS-S 02 Front end shaking under high load during acceleration
check your motor mounts....guessing your front mount is toast and when you get on the gas, the motor shifts in its mount and you are feeling metal on metal.......like I said though, just a guess....
#5
Re: RXS-S 02 Front end shaking under high load during acceleration
The tires are good no issues there, it only happens under hard acceleration and as soon as I let off the gas it stops right away. Motor mounts are good but I was reading that the either axle can have some give to it and that would make this happen as well..... any thoughts.
Thanks for all your help
Thanks for all your help
#6
Surje.motorsports
Join Date: Aug 2007
Location: mechanicsburg, pa, usa
Posts: 3,523
Likes: 0
Received 0 Likes
on
0 Posts
Re: RXS-S 02 Front end shaking under high load during acceleration
it could be your axles although it is very uncommon in our cars....is the any leaking or anything near the axles?
#7
Honda-Tech Member
Re: RXS-S 02 Front end shaking under high load during acceleration
Do the a2 motors have balance shafts, or just the a3 motors?
Also...the OEM axles do have rubber donuts on them to help reduce vibration, maybe one fell off or something? Just trying to think of ideas...
Also...the OEM axles do have rubber donuts on them to help reduce vibration, maybe one fell off or something? Just trying to think of ideas...
Trending Topics
#8
cute little bastard
Join Date: Aug 2004
Location: Sersey Jhore
Posts: 7,086
Likes: 0
Received 0 Likes
on
0 Posts
Re: RXS-S 02 Front end shaking under high load during acceleration
Changed it, and it was perfect.
#9
Re: RXS-S 02 Front end shaking under high load during acceleration
That is what I have read and found online in regards to this issue, shaking like that under heavy load I's the axles. The original axles can have play in them over time so I will have them inspected for play or wear. Most likely I will swap them out. I am not going to put stock ones back in, any thoughts on after market ones? And where to get them I live in Oakville Ontario.
Thanks for all your feedback it helps out for sure, this shaking is driving me kookoo.
Thanks for all your feedback it helps out for sure, this shaking is driving me kookoo.
#10
Surje.motorsports
Join Date: Aug 2007
Location: mechanicsburg, pa, usa
Posts: 3,523
Likes: 0
Received 0 Likes
on
0 Posts
Re: RXS-S 02 Front end shaking under high load during acceleration
why would you put aftermarket axles in instead of oem? will you be tracking your car
#12
Re: RXS-S 02 Front end shaking under high load during acceleration
I'm having the same problem in my ep3...
I already replaced all motor mounts..
Going to check axles.
Thanks for info..
Was about to change my clutch.
I already replaced all motor mounts..
Going to check axles.
Thanks for info..
Was about to change my clutch.
Thread
Thread Starter
Forum
Replies
Last Post
Skywalk
Transmission & Drivetrain
2
07-12-2010 08:52 PM