RSX ECU in EP3
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2006
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
RSX ECU in EP3
Hey all
recently someone tried boosting my car. They failed at hotwiring it, so they took the ECU (and my subs).
Ive got the car at my friends house, but it's not driveable.
Was wondering if I could use an RSX base model MT ECU TEMPORARILY to move it to get glass replaced.
Thanks for any insight.
**** thieves
recently someone tried boosting my car. They failed at hotwiring it, so they took the ECU (and my subs).
Ive got the car at my friends house, but it's not driveable.
Was wondering if I could use an RSX base model MT ECU TEMPORARILY to move it to get glass replaced.
Thanks for any insight.
**** thieves
#4
Re: RSX ECU in EP3
correct about the immobilizer
plus you'll be throwing engine lights cause the base rsx has those stupid dual runners in the intake manifold. Not sure if that would effect drivability.
I would try to beg a buddy with k-pro to borrow his ecu quick
plus you'll be throwing engine lights cause the base rsx has those stupid dual runners in the intake manifold. Not sure if that would effect drivability.
I would try to beg a buddy with k-pro to borrow his ecu quick
#5
Honda-Tech Member
Thread Starter
Join Date: Jan 2006
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
Re: RSX ECU in EP3
****.
Guess i'm SOL then, no one i know has kpro.
Would I be able to buy an RSX ecu and have it reprogrammed @ the dealer for my application?
By the way, thanks so much for all the info
Guess i'm SOL then, no one i know has kpro.
Would I be able to buy an RSX ecu and have it reprogrammed @ the dealer for my application?
By the way, thanks so much for all the info
#6
Honda-Tech Member
#7
Honda-Tech Member
Re: RSX ECU in EP3
I'd be on the lookout for a PNF ecu in the classifieds, people don't sell EP3 ecu's very often. You might see yours for sale and you can buy it back!
j/k I hate thieves, sorry to hear about your whip. Why don't you file a claim with insurance??
Trending Topics
#8
Junior Member
Join Date: Oct 2006
Location: Endwell, NY, United States
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
#10
Surje.motorsports
Join Date: Aug 2007
Location: mechanicsburg, pa, usa
Posts: 3,523
Likes: 0
Received 0 Likes
on
0 Posts
Re: RSX ECU in EP3
#11
#13
Honda-Tech Member
Re: RSX ECU in EP3
I'm pretty sure the EP3s utilize the same design, hence the "vtec crossover" point of 2200rpm designed for economy.
I have an illustration on my computer at home, I'll post it later...
I have an illustration on my computer at home, I'll post it later...
#14
Re: RSX ECU in EP3
but why would they use a black plastic for the rsx and metal for the ep3. VTEC crossover is the same economy probably cause they both have the half vtec setup lol. From the book I have I believe the base rsx makes more power than the ep3 because of the dual runner intake manifold. But not by much
#16
Honda-Tech Member
Join Date: Sep 2006
Location: glendale arizona
Posts: 609
Likes: 0
Received 0 Likes
on
0 Posts
Re: RSX ECU in EP3
the ep3 uses a k20a2(type s) intake manifold and the base rsx uses the plastic one. thats why the rsx has slightly higher low end tq but the si is faster at higher rpms
#17
Honda-Tech Member
Thread Starter
Join Date: Jan 2006
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
Re: RSX ECU in EP3
BTW thanks again for all the help
Does this site look legit?
https://www.k20tuned.com/xcart/produ...&cat=0&page=12
Does this site look legit?
https://www.k20tuned.com/xcart/produ...&cat=0&page=12
Thread
Thread Starter
Forum
Replies
Last Post