2002 EP3 Suspension Build
#102
Honda-Tech Member
Thread Starter
Join Date: Nov 2014
Location: GA
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Clutch weirdness...
So the clutch was installed about 400 miles ago... Until yesterday all was good. Pedal was nice and hard and grabbing at the bottom. Today its all mush and grabbing a lot higher. Will bleed the system again, but i doubt that's it. It just makes no sense the way it just went to blah... ( Stage 1 organic Exedy clutch, pressure plate and HF02 Flywheel all brand new) Was thinking about replacing the master cylinder as it is still the original one ( 240K ), but this now makes no sense .... that it felt good for a while and than BLAH...
Everything was torqued down and clutch pedal adjusted per manual.Any input will be appreciated.
Everything was torqued down and clutch pedal adjusted per manual.Any input will be appreciated.
#104
Re: 2002 EP3 Suspension Build
my bet is on the master cylinder. You should definitely replace it first. I had almost the same thing happen with my car and it solved it.
#105
Honda-Tech Member
Thread Starter
Join Date: Nov 2014
Location: GA
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2002 EP3 Suspension Build
#107
Honda-Tech Member
Thread Starter
Join Date: Nov 2014
Location: GA
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
[HrZn]4life
Road Racing / Autocross & Time Attack
18
12-30-2009 12:50 AM