MadLorGLK

I have an 04 ep3 and I am getting the 04-05 JDM front bumper and lip, JDM sideskirts, JDM rear bumper and lip.

For those of you that already have the items above can you please HELP ME OUT.
I need to know WHICH & HOW MUCH OF EACH brackets, clips, screws, nuts etc will I need for installation.
I no longer have any of my oem bumpers, skirts and liners as well thus I do not have any oem bolts, clip, brackets, washers etc.

So far I have already ordered the bumper clips from clubrsx but I still need alot more parts to make everything oem again.

04-05 JDM FRONT & REAR BUMPERS AND LIPS
I THINK THAT I NEED PARTS 35 (6), 27 (6), 29 (2), 25 (2), 34 (6), 28 (6), 33 (4) 15 (2) 37 (4), 26 (4)
CAN ANYONE CONFIRM THIS?




04-05 USDM FRONT & REAR BUMPERS AND LIPS
I ALAREADY KNOW WHICH PARTS I NEED FROM HERE, ALOT



02-03 JDM BUMPERS & LIP.
IS THERE A DIFFERENCE BTW 02-03 N 04-05 REAR BUMPER N LIPS?




[COLOR="red"]02-05 JDM SIDESKIRTS
I NOW KNOW THAT I NEED parts 2 (4), 15 (8), 19 (4), 17 (8) or another option would be to install an additional part number 2 on each side thus the new total parts needed would be 2 (6), 15 (12), 17 (12) 19 (6).

CAN ANYONE CONFIRM IF I WOULD NEED PARTS 20 (2), 21 (20) , 22 (2)?



04-05 USDM SKIRTS
WILL PARTS 31 & 32 ALSO WORK FOR JDM SKIRTS?
I would need PARTS 31 (18) and 32 (4) for the usdm skirts, SO WILL I NEED THE SAME QUANTITY FOR MY JDM SKRTS
IT TURNS OUT THAT part 32 is what people are calling sticky clips and they use this to install usdm skirts onto 02-03 ep3's



I already know that I need a JDM front rebar
I know that there has to be some type of modification of the rear oem rebar and the rear jdm rebar but if someone can elaborate on how to mod this then that would be great.

I also already know that I need an 04-05 JDM grill, along with the 04-05 JDM top trim piece

My main question now is whether the locations of the holes on the side of the ep will match up with the locations of the clips on the jdm sideskirts.
I also need to know whether to buy the usdm parts 31 (18) and 32 (4) for the skirts or do I buy jdm parts 20 (2), 21 (20), & 22 (2) for the jdm skirts.

PLEASE HELP A BROTHA OUT...ESPECIALLY THOSE BELONGING TO THE FACELIFT CREW
WHERE YOU GUYS AT.....


EDIT: SEEMS LIKE ALOT OF THIS STUFF HAS BEEN COVERED B4
THERES INFO ALL OVER THE PLACE ON THE HATCH
IT WOULD BE NICE TO HAVE IT ALL IN ONE PLACE
http://www.ephatch.com/forum/showthread.php?t=44454
http://www.ephatch.com/forum/showthr...ght=sideskirts

tweek_boii

jdm zip ties

MadLorGLK

HAHA
FAIL
i want as close to an oem install as possible
no ghetto booty ****

lostniraq25

you will also need the upper trim piece for the grille if your going the 04-05 route. and your numbers are accurate for the front and rears with lips. not sure about the sides as im still using the oem side skirts.

MadLorGLK

thanks, I actually knew about the top trim piece already but I added it to the first post just to prevent confusion

I also updated the numbers for the fronts and rears based on what a representative from japanparts.com relayed to me.

bump for some answers about the skirts