frogsr

i have an old (but brand new purchased back in 2003-ish) usdm 2001 itr (b18c5) head without cams but i haven't the slightest clue what the fair going rate is for it. i checked up some other sites and with cams they were in the ballpark of around $1700 or so. so without cams, maybe $1300?

any thoughts or feedback appreciated.

racebum

somewhere around 800 would be my thoughts. when you ask more it starts getting up around what someone could purchase a better head from endyn for.

thundernoodle

without cams? dist? IM? vtec solenoid? Probably ~600

frogsr

yeah, it would be the complete head assembly only minus the cams. these are some big ranges i'm getting... hmmm. if prices are $600-800 range, looks like prices are going down for a brand new in the box head?

frogsr

ok, so two years later it looks like i'm finally getting around to selling. i'll post soon in the classifieds/marketplace.

any current going rates for a brand new 2001 usdm itr complete head (minus cams)? any suggestions would be appreciated. i keep thinking $1200? what do you guys think? thanks!

inteman

i have seen bare type r heads run for 1000.00-1100.00 not including shipping.

TypeRider98

used itr heads without cams average around $450-$500 when you can find them, so brand new and with all the accessories listed above should fetch around $800-$1000 depending on the buyer

Dave_B

For a site that always has things listed rediculously high (check the FS thread, 2 sets of Recaro's. 2k and 4k. Really????)

IMO, a brand new head, assuming you have the paperwork and it's still in the original box WITHOUT cams should fetch around $1200.

Go look up the BNIB price from Honda, subtract maybe 100 or so or more to have folks consider yours instead of new from dealer and go from there.

I know recently, costs of shortblocks and long block have gone way up.

ok, so I went out of my way for the OP... here's what they are selling for BNIB from the dealer, NO CAMS

1 12100-P73-J00 CYLINDER HEAD ASSY. 001 2001 INTEGRA 2082.48 1561.86

From this source... http://www.acuracarland.com/j/i/3166...rtsOnline.html

So $1200 sounds right on the money to me.

racebum

don't the dealer heads come with cams and a vtec solenoid? the ones acura oem parts sold on ebay for awhile did. those were....1600 i want to say?

put it on ebay for 1g and let it camp a month, subtract 50 bucks per month till it sells

94sicteg

no they dont come with cams nor the v-tec solenoid the price i see on the acura website is 1800 for the head and 300 for the solenoid so i would say if you find someone really wanting to keep the whole type r set up i would say 1200 would be fair but like a lot of these guys say keep in mind what a dart head cost and others

frogsr

thanks for the responses dave_b and others, it helps a lot to get feedback from the type r forum people for obvious reasons. two years ago the box was intact. it has since disintegrated, lol. the plastic wrap is still there, though, along with the original orange packaging for the other parts of the head.

racebum, hehe, you responded to my thread 2 years ago, too.

if anyone is interested, look for it in the marketplace. it'll be up soon with pics. i'll post a link up to it later...

racebum

https://honda-tech.com/forums/performance-45/if-you-need-oem-parts-your-car-click-here-2591251/

94sicteg

they can adjust the prices there a dealership i just went off the website im sure if i call my guy i can get it for about the same price if not cheaper and i didn't see them list the vtec solenoids listed per there complete head lol

racebum

gotta check on that solenoid. i know curry acura was selling them with the solenoid and cams but i'm not sure if that was them or if it was included in the box. i bought a R transmission new in the box and it came with one of the sensors that was not listed online. i also know the pistons come with pins even though the pins are listed separately

i'm really good at blowing up itr motors btw, helps me get to see many parts from the dealer. i just poped another one the other day. 90lbs of compression in cyl 3 now

wego5typer#431

The 00-01 USDM heads come with cams but no vtec solenoid. I looked at the one that was on ebay from dealer and it had the vtec solenoid, but that head was for the 1998 USDM R.
I purchased a brand new head for My 2001 R last spring for around $1700 from Hondapartsunlimited.com
I believe a good price for head in question would be around the $1000-1100 mark.

racebum

sounds accurate, thanks for clearing up the cam/vtec solenoid questions

NHBP#878

But what I want to know is this still for sale or no ? I sent OP. a private message but no reply so I figured I'd leave a message on this thread as well . need the head as my 00.ITR.. just took a poop at 6k rpm and droped #3 cylinder exhaust valve

racebum

you might need a piston as well. it doesn't take much to break the stock pistons. a valve hitting that fast could do it. you tear it apart and inspect the damage yet?

frogsr

correct. no vtec solenoid with my head that is for sale. didn't come with it.

here is the for sale post for those who are interested in this head:

http://www.hondamarketplace.com/show...0#post46994030

OH_1fstgsr

iTrader: (2)

This always seemed like it had good information for ITR Head Cost and parts.

http://www.city-speed.com/webstore/e...TypeRhead.html

racebum

that's a pretty good deal for lost motion assemblies

Salami

Incorrect.

Part #12100-P73-J00 is for all ITR heads from 97-01. This part number does not include the cams. $1561 from Delray Acura.

http://www.acuraoemparts.com/delray/...1=&inputstate=
http://www.acuraoemparts.com/delray/...All&vinsrch=no




There is a package that includes the cams. Part #10003-P73-305
Complete head and includes 00-01 cams. Better deal at $1729 from Delray Acura.