what pistons are you guys using?
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: lost in co, usa
Posts: 477
Likes: 0
Received 0 Likes
on
0 Posts
what pistons are you guys using?
well i am getting board with my stock internals and want to change few things. it was tunes about a year ago and pulled 175 whp with v tec controler. now i wanna pull little closer to 195whp. i dont wanna go all big and fully built it. i was thinking more like a new higher compression pistons like CTRs. i dont really know what else to change since i like everything aobut the type r motor. what would you guys recommend changing for little more power in my engine. i was even thinking nos with like 50 shot too. but the car is a daily drive and i wouldnt be shooting nos all the time. i need something strong all motor.
#5
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: lost in co, usa
Posts: 477
Likes: 0
Received 0 Likes
on
0 Posts
Re: what pistons are you guys using?
ya i was thinking about cams too but i just keep hearing from people that type r cams are really good.
#6
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: lost in co, usa
Posts: 477
Likes: 0
Received 0 Likes
on
0 Posts
#7
I said I don't want a title!
Re: what pistons are you guys using?
Is this for a Type R or do you have an ITR motor in another car? One will affect the value (if original), the other should probably be asked in the all-motor forum.
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: lost in co, usa
Posts: 477
Likes: 0
Received 0 Likes
on
0 Posts
Re: what pistons are you guys using?
it ITR motor in another car. i asked here because everone on here has type r motor so i can relate with you guys on the motor.
#9
FSAE
#11
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: lost in co, usa
Posts: 477
Likes: 0
Received 0 Likes
on
0 Posts
Re: what pistons are you guys using?
anyone using CTR pistons in your ITR motor. how is the results? also i did notice there is some cheap CTR pistons on ebay are they any good. anyone bought any of them before? http://cgi.ebay.com/ebaymotors/Jdm-C...Q5fAccessories
are these real oem CTR pistons?
are these real oem CTR pistons?
#12
FSAE
Re: what pistons are you guys using?
If you want to use Honda cast pistons, use PR3 or P30 pistons on a 1.8L.
They are considerably lighter, do not have a horrible dome design, and will make the same if not more power than CTR's.
They are considerably lighter, do not have a horrible dome design, and will make the same if not more power than CTR's.
#13
Re: what pistons are you guys using?
i made 200 whp and 140 ish tq with ctr pistons with improper tune. could have got more with better tuning.
now i have wiseco pistons in my B20 block
now i have wiseco pistons in my B20 block
#14
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: lost in co, usa
Posts: 477
Likes: 0
Received 0 Likes
on
0 Posts
#15
Very Emergency!!
Join Date: Dec 2003
Location: ....Things Just Getting Good..... Reno, NV
Posts: 3,666
Likes: 0
Received 0 Likes
on
0 Posts
Re: what pistons are you guys using?
Yep, I bought the RS Machine P30 pistons for my rebuild. A bump of a .5 point in compression.
#16
Thread
Thread Starter
Forum
Replies
Last Post
kart_driver
All Motor / Naturally Aspirated
26
08-31-2010 01:07 PM