what header to get for my jdm dc2
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2007
Location: suffolk
Posts: 1,776
Likes: 0
Received 0 Likes
on
0 Posts
what header to get for my jdm dc2
Hey all
i have a jdm dc2 with 5zigen 421 header
want mugen 4-1 really but hard finding a good one
so i am now looking at dc sports 4-1 jdm 2.5"
These good header?
i have a jdm dc2 with 5zigen 421 header
want mugen 4-1 really but hard finding a good one
so i am now looking at dc sports 4-1 jdm 2.5"
These good header?
#3
Honda-Tech Member
Join Date: Nov 2002
Location: Dreaming of east Tennessee!
Posts: 4,251
Likes: 0
Received 1 Like
on
1 Post
Re: what header to get for my jdm dc2
I had a DC years ago with the 2.5" collector. My only complaint was the ceramic coating eventually comes of and the header will rust. If you're going to get one make sure you get the stainless model.
#6
Honda-Tech Member
Join Date: Mar 2004
Location: vancity
Posts: 5,195
Likes: 0
Received 0 Likes
on
0 Posts
Re: what header to get for my jdm dc2
Even though we are all getting older and times are changing it's nice to know that JASMA remains steadfast in this industry
OP: Jumping from a 5Zigen to a DC, assuming the 2.5" collector remains the same for both, won't change much in performance. Look into Toda, Hytech or SMSP for a high quality header that delivers results. Or you can purchase a replica of the above mentioned designs and you should still see a difference but the reps suffer from horrible fitment and welds.
OP: Jumping from a 5Zigen to a DC, assuming the 2.5" collector remains the same for both, won't change much in performance. Look into Toda, Hytech or SMSP for a high quality header that delivers results. Or you can purchase a replica of the above mentioned designs and you should still see a difference but the reps suffer from horrible fitment and welds.
Trending Topics
#9
Honda-Tech Member
Join Date: Nov 2001
Location: Playing in the sandbox
Posts: 2,761
Likes: 0
Received 2 Likes
on
2 Posts
#11
Honda-Tech Member
Join Date: Mar 2004
Location: vancity
Posts: 5,195
Likes: 0
Received 0 Likes
on
0 Posts
Re: what header to get for my jdm dc2
I hear ya. I run the PLM RMF knock off with no issues and the welds and fitment were decent. The bang for buck factor is undeniable. I just didn't want to promote it as being close to equal quality to the real part it was being copied from as the two factors I mentioned are common issues I've seen people write about after installation.
#12
Honda-Tech Member
iTrader: (2)
Re: what header to get for my jdm dc2
All the time everytime.
Toda is the best off the shelf unit, HyTech and SMSP are the top choices for their unmatched performance. All three are top quality.
I have recently been hearing good things about PLM. I am considering a purchase for my 97'.
I have recently been hearing good things about PLM. I am considering a purchase for my 97'.
Thread
Thread Starter
Forum
Replies
Last Post