Took some snaps of my car and the beater Lot's of Picks (56k go away)
#2
Member
Thread Starter
Join Date: May 2002
Location: TurBlowVille, SC, USA
Posts: 3,719
Likes: 0
Received 0 Likes
on
0 Posts
Re: Took some snaps of my car and the beater Lot's of Picks (FOrSfEd)
Here are the specs
Engine:
B18C5 (STOCK)
Precision SC61 Turbo
Polished Compressor Housing
Port Matched Exhaust Housing
Hp Coated Manifold, DP and turbo Exhaust Housing
DSR Motorsports Custom Manifold
DSR Motorsports Custom Mandrel Bent 3” Downpipe Retains AC
DSR Motorsports Custom Dumptube
Rc Engineering 550cc Injectors
88 Crx Clips with Resistor Box
SX Fuel Pressure Regulator with Gauge
STR Polished Fuel Rail
Mcmasters Vaccum Manifold
GSR Oil Pan w/ -10 Oil Return Fitting and Line
Tial 40mm Wastegate .45 bar spring
Precision 600hp Intercooler 31.5x8x3.5
ATP Silicon Couplers
ATP T-Bolts
Drag Intercooler Piping (Painted Black)
Goodridge Oil Distribution Block
Goodridge Stainless Steel Oil Feed and Return Lines
Thermal 3" Cat Back Exhaust
Greddy Type S BOV
Boomslanger Obd2-Obd1 (B) Conversion Harness
P28 ECU
Hondata 2B w/ Datalogging
Autometer Oil Pressure Gauge Mounted Under Hood
Full Dual Core Radiator
2 Flex-lite Slim Line Fan (Hard Wired)
Redline Water Wetter
Redline Transmission Fluid
Inside:
Greddy Turbo Timer
Dual Gauge Bezel
Dual Gauge Pillar Pod
Custom Mounted Boost Gauge in Factory Cruise Control Position
Autometer Ultra-lite Boost Gauge
Autometer Ultra-lite EGT Gauge
Autometer Ultra-lite Air Fuel Gauge
Autometer Ultra-lite Oil Pressure Gauge
Autometer Ultra-lite Water Temp Gauge
Stiff Stuff:
Tein S Tech Lowering Springs
Factory Front Strut Brace
Factory Trunk Brace
Factory Lower Tie Bar
Energy Suspension Shift Stabilizer Bushing
Wheels and Tires:
Stock ITR Wheels Powder Coated Black
Dunlop 195/55/15 Tires
Outside:
Smoked Bumper Lights
Ice:
Factory Acura Radio
Infinity Kappa 5 ¼ Component Set with 1” Tweeters (Front)
Infinity Kappa 5 ¼ Coaxial (Rear)
Power Inverter Hard Wired
Engine:
B18C5 (STOCK)
Precision SC61 Turbo
Polished Compressor Housing
Port Matched Exhaust Housing
Hp Coated Manifold, DP and turbo Exhaust Housing
DSR Motorsports Custom Manifold
DSR Motorsports Custom Mandrel Bent 3” Downpipe Retains AC
DSR Motorsports Custom Dumptube
Rc Engineering 550cc Injectors
88 Crx Clips with Resistor Box
SX Fuel Pressure Regulator with Gauge
STR Polished Fuel Rail
Mcmasters Vaccum Manifold
GSR Oil Pan w/ -10 Oil Return Fitting and Line
Tial 40mm Wastegate .45 bar spring
Precision 600hp Intercooler 31.5x8x3.5
ATP Silicon Couplers
ATP T-Bolts
Drag Intercooler Piping (Painted Black)
Goodridge Oil Distribution Block
Goodridge Stainless Steel Oil Feed and Return Lines
Thermal 3" Cat Back Exhaust
Greddy Type S BOV
Boomslanger Obd2-Obd1 (B) Conversion Harness
P28 ECU
Hondata 2B w/ Datalogging
Autometer Oil Pressure Gauge Mounted Under Hood
Full Dual Core Radiator
2 Flex-lite Slim Line Fan (Hard Wired)
Redline Water Wetter
Redline Transmission Fluid
Inside:
Greddy Turbo Timer
Dual Gauge Bezel
Dual Gauge Pillar Pod
Custom Mounted Boost Gauge in Factory Cruise Control Position
Autometer Ultra-lite Boost Gauge
Autometer Ultra-lite EGT Gauge
Autometer Ultra-lite Air Fuel Gauge
Autometer Ultra-lite Oil Pressure Gauge
Autometer Ultra-lite Water Temp Gauge
Stiff Stuff:
Tein S Tech Lowering Springs
Factory Front Strut Brace
Factory Trunk Brace
Factory Lower Tie Bar
Energy Suspension Shift Stabilizer Bushing
Wheels and Tires:
Stock ITR Wheels Powder Coated Black
Dunlop 195/55/15 Tires
Outside:
Smoked Bumper Lights
Ice:
Factory Acura Radio
Infinity Kappa 5 ¼ Component Set with 1” Tweeters (Front)
Infinity Kappa 5 ¼ Coaxial (Rear)
Power Inverter Hard Wired
#3
Honda-Tech Member
iTrader: (1)
Join Date: Sep 2003
Location: USA
Posts: 2,461
Likes: 0
Received 0 Likes
on
0 Posts
Re: Took some snaps of my car and the beater Lot's of Picks (FOrSfEd)
2 things:
1) Get a Lip!
2) Rice corners gotta go, put the ambers back in
None the less, beautiful (and I'm sure fast) R.
1) Get a Lip!
2) Rice corners gotta go, put the ambers back in
None the less, beautiful (and I'm sure fast) R.
#4
Member
Thread Starter
Join Date: May 2002
Location: TurBlowVille, SC, USA
Posts: 3,719
Likes: 0
Received 0 Likes
on
0 Posts
Re: Took some snaps of my car and the beater Lot's of Picks (RGoose18)
Yeah I know I need a lip. My ambers broke and I like the way the smoked ones look. The go well with the black wheels. Thanks for the comments though
#5
Join Date: May 2003
Location: Sydney, Australia, Australia
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
hey nice car!
did u get the rims professionally powdercoated?
i did the same thing with my audm ones .. but couldnt keep the red HONDA/ACURA signs like your ones
how did they do that?
did u get the rims professionally powdercoated?
i did the same thing with my audm ones .. but couldnt keep the red HONDA/ACURA signs like your ones
how did they do that?
#6
Member
Thread Starter
Join Date: May 2002
Location: TurBlowVille, SC, USA
Posts: 3,719
Likes: 0
Received 0 Likes
on
0 Posts
Re: (tofuR)
Yeah the rims are professional. I wasn't able to keep the logos either they are actually vinyl decals that I got made with the same dimension. You can't even tell up close.
Trending Topics
#10
Honda-Tech Member
Join Date: Nov 2002
Location: ITR owner... round three
Posts: 2,912
Likes: 0
Received 0 Likes
on
0 Posts
Re: Took some snaps of my car and the beater Lot's of Picks (FOrSfEd)
Looks tough man! Those wheels came out pretty nice.
The Comptech faux carbon fiber lip looks awesome on PY's.
By the way, who care's about Hype R's? I wanna know what this baby does in the quarter
The Comptech faux carbon fiber lip looks awesome on PY's.
By the way, who care's about Hype R's? I wanna know what this baby does in the quarter
#11
Honda-Tech Member
iTrader: (1)
Join Date: Sep 2003
Location: USA
Posts: 2,461
Likes: 0
Received 0 Likes
on
0 Posts
Re: (dawalude)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dawalude »</TD></TR><TR><TD CLASS="quote">i think it'll look better minus the A logo on the rims </TD></TR></TABLE>
No way, keep rockin it DIY style
No way, keep rockin it DIY style
#12
Honda-Tech Member
Join Date: Nov 2002
Location: ITR owner... round three
Posts: 2,912
Likes: 0
Received 0 Likes
on
0 Posts
Re: (RGoose18)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RGoose18 »</TD></TR><TR><TD CLASS="quote">
No way, keep rockin it DIY style</TD></TR></TABLE>
Preach it! DIY in your eye...
No way, keep rockin it DIY style</TD></TR></TABLE>
Preach it! DIY in your eye...
#13
I said I don't want a title!
Re: Took some snaps of my car and the beater Lot's of Picks (FOrSfEd)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote »</TD></TR><TR><TD CLASS="quote"></TD></TR></TABLE>
I think you need more gauges.
I think you need more gauges.
#15
Honda-Tech Member
Join Date: Jul 2002
Location: Chicagoland, usa
Posts: 5,695
Likes: 0
Received 0 Likes
on
0 Posts
Re: Took some snaps of my car and the beater Lot's of Picks (FOrSfEd)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FOrSfEd »</TD></TR><TR><TD CLASS="quote">I like to know whats going on with my motor at all times </TD></TR></TABLE>
And we'll get the oil pressure working
And we'll get the oil pressure working
#20
Honda-Tech Member
Join Date: Sep 2002
Location: Seattle, Wa, USA
Posts: 4,080
Likes: 0
Received 0 Likes
on
0 Posts
Re: Took some snaps of my car and the beater Lot's of Picks (FOrSfEd)
i actually like those black rims.
<--------- not a fan of flat black so your somewhat glossy black makes a world of a difference.
<--------- not a fan of flat black so your somewhat glossy black makes a world of a difference.