Sound clips of the HyTech exhaust...VERY big files
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2000
Location: Sears Point, CA
Posts: 5,276
Likes: 0
Received 0 Likes
on
0 Posts
Sound clips of the HyTech exhaust...VERY big files
Have fun...and thank you Graham for the vids.
Here is my car...
2001 Type-R, 44,000 miles...the exhaust has ~8,000 miles on it since I received it, ~25 drag runs, 2 autocrosses, and tons of mountain runs. I know that the exhaust is louder than it was when i received it.
Specifications:
B18C5
Mugen headgasket
toda cam gears +5, +5
Comptech Icebox
HyTech header and exhaust
test pipe, no Cat
Comptech Al flywheel
JDM final drive
Hondata, 4500 rpm vtec x-over
running a little rich up top...
All runs in 4th gear: right click, save as HyTech 26.1MB
Any idea on the smoke from my car? Its at the top end, and I know that I start tapering off towards rich at around 8000rpm, at 8400 rpm I'm at 12:1, just wondering if it's anything else..., I let off the dyno at ~8600 rpm.
Iggy's car...2001 Type-R, ~20,000 miles, exhaust has ~5-6,000 miles on it.
Specifications:
B18C5
Mugen 4-2-1 header, JDM
Mugen twinloop, JDM length
Carsound 54006 cat
A'PEXi VAFC
I believe that the second, or third run has vtec switched to 4500rpm
All runs in 3rd gear: right click, save as Iggy's Mugen 16.7MB
EDITED TO ADD jdmspoonitr's T1R
jdmspoonitr's car
B18C5
AEM CAI
Type-One R header(T1R)
Type-One R exhaust(T1R)
Carsound cat, slight exhaust leak
VAFC, vtec at 4500 rpm
All runs in 3rd gear: right click, save as jdmspoonitr 8.62MB
Austin
[Modified by Austin, 6:05 PM 12/9/2002]
Here is my car...
2001 Type-R, 44,000 miles...the exhaust has ~8,000 miles on it since I received it, ~25 drag runs, 2 autocrosses, and tons of mountain runs. I know that the exhaust is louder than it was when i received it.
Specifications:
B18C5
Mugen headgasket
toda cam gears +5, +5
Comptech Icebox
HyTech header and exhaust
test pipe, no Cat
Comptech Al flywheel
JDM final drive
Hondata, 4500 rpm vtec x-over
running a little rich up top...
All runs in 4th gear: right click, save as HyTech 26.1MB
Any idea on the smoke from my car? Its at the top end, and I know that I start tapering off towards rich at around 8000rpm, at 8400 rpm I'm at 12:1, just wondering if it's anything else..., I let off the dyno at ~8600 rpm.
Iggy's car...2001 Type-R, ~20,000 miles, exhaust has ~5-6,000 miles on it.
Specifications:
B18C5
Mugen 4-2-1 header, JDM
Mugen twinloop, JDM length
Carsound 54006 cat
A'PEXi VAFC
I believe that the second, or third run has vtec switched to 4500rpm
All runs in 3rd gear: right click, save as Iggy's Mugen 16.7MB
EDITED TO ADD jdmspoonitr's T1R
jdmspoonitr's car
B18C5
AEM CAI
Type-One R header(T1R)
Type-One R exhaust(T1R)
Carsound cat, slight exhaust leak
VAFC, vtec at 4500 rpm
All runs in 3rd gear: right click, save as jdmspoonitr 8.62MB
Austin
[Modified by Austin, 6:05 PM 12/9/2002]
#2
Honda-Tech Member
Join Date: Jun 2000
Location: Crazy Canuck, Everywhere
Posts: 1,637
Likes: 0
Received 0 Likes
on
0 Posts
Re: Sound clips of the HyTech exhaust...VERY big files (Austin)
Great stuff!
Can't say what's the deal with the smoke but the sound is sweet.
The twin loop didn't sound bad either but I'm biased
Can't say what's the deal with the smoke but the sound is sweet.
The twin loop didn't sound bad either but I'm biased
#6
Join Date: Feb 2002
Location: The planet farthest from
Posts: 1,039
Likes: 0
Received 0 Likes
on
0 Posts
Re: Sound clips of the HyTech exhaust...VERY big files (Austin)
Thanks dude!
What camshafts are in your car?
stock
What camshafts are in your car?
stock
#7
Honda-Tech Member
Join Date: Feb 2002
Location: Woodbridge, Ont, Canada
Posts: 728
Likes: 0
Received 0 Likes
on
0 Posts
Re: Sound clips of the HyTech exhaust...VERY big files (Austin)
2001 Type-R, 44,000 miles...the exhaust has ~8,000 miles on it since I received it, ~25 drag runs, 2 autocrosses, and tons of mountain runs.
Sweet R and mods...nice vids.....very strong numbers.....for now ...I betcha within a year or so of continued autocrosses, mountain runs and drags.....well I think you know what I'm getting at.....that smoke is NOT a good thing. Let's leave it at that.
Only my opinion....11 years as a Canadian Intra-Provincially licenced Toyota, Volvo, HONDA mechanic, which on forums means nothing. Mark my words though.
Trending Topics
#11
Honda-Tech Member
Thread Starter
Join Date: Sep 2000
Location: Sears Point, CA
Posts: 5,276
Likes: 0
Received 0 Likes
on
0 Posts
Re: Sound clips of the HyTech exhaust...VERY big files (Junglist)
Thanks dude!
what is your redline at? do you have the graph from that dyno run? People say that you can't make power past 8.5 with stock camshafts, but I would like to see if that's true.
what is your redline at? do you have the graph from that dyno run? People say that you can't make power past 8.5 with stock camshafts, but I would like to see if that's true.
Only my .02 cents worth.....
Sweet R and mods...nice vids.....very strong numbers.....for now ...I betcha within a year or so of continued autocrosses, mountain runs and drags.....well I think you know what I'm getting at.....that smoke is NOT a good thing. Let's leave it at that.
Only my opinion....11 years as a Canadian Intra-Provincially licenced Toyota, Volvo, HONDA mechanic, which on forums means nothing. Mark my words though.
Sweet R and mods...nice vids.....very strong numbers.....for now ...I betcha within a year or so of continued autocrosses, mountain runs and drags.....well I think you know what I'm getting at.....that smoke is NOT a good thing. Let's leave it at that.
Only my opinion....11 years as a Canadian Intra-Provincially licenced Toyota, Volvo, HONDA mechanic, which on forums means nothing. Mark my words though.
Austin
#13
Honda-Tech Member
Join Date: Feb 2002
Location: Woodbridge, Ont, Canada
Posts: 728
Likes: 0
Received 0 Likes
on
0 Posts
Re: Sound clips of the HyTech exhaust...VERY big files (Austin)
Here is my car...
2001 Type-R, 44,000 miles...the exhaust has ~8,000 miles on it since I received it, ~25 drag runs, 2 autocrosses, and tons of mountain runs.
Any idea on the smoke from my car? Its at the top end, and I know that I start tapering off towards rich at around 8000rpm, at 8400 rpm I'm at 12:1, just wondering if it's anything else..., I let off the dyno at ~8600 rpm.
Austin
2001 Type-R, 44,000 miles...the exhaust has ~8,000 miles on it since I received it, ~25 drag runs, 2 autocrosses, and tons of mountain runs.
Any idea on the smoke from my car? Its at the top end, and I know that I start tapering off towards rich at around 8000rpm, at 8400 rpm I'm at 12:1, just wondering if it's anything else..., I let off the dyno at ~8600 rpm.
Austin
I drive the car.
There you have it Austin.....You've answered your own question....at least your honest about it...
Sorry
#14
Honda-Tech Member
iTrader: (1)
Re: Sound clips of the HyTech exhaust...VERY big files (d8168055)
What did you say????I can't hear you!!!
HAhaha yeah that sucker is loud. It is actually quite nice on the street, I roll without the silencer everywhere. This is the old design with the two inch bottleneck before the rear section. It sounds way nicer in real life. The car did not sound "MEAN" until I put the header on.
I am happy with the setup overall, I was just hoping for a fatter midrange and more torque. I'm sure this could be achieved the next dyno day we have. I'm gonna throw down the cash and get as many runs in as possible. also getting an fpr and maybe a fuel rail while i'm at it. One thing is for sure though, I have never heard any other Honda that sounds like mine in the cabin. Truly a sweet sound, especially after Austin helped me smoothe out the curve. I gained around 10 horses at certain rpms. The car feels like new and it runs like a beast. I have to be careful on the freeway now, trying not to vtec in 5th. 4500 rpm vtec Xover owns.
Thanks Austin for organizing the dyno day!!! And thanks Graham for the vids!!!
All the people that flaked missed out.
HAhaha yeah that sucker is loud. It is actually quite nice on the street, I roll without the silencer everywhere. This is the old design with the two inch bottleneck before the rear section. It sounds way nicer in real life. The car did not sound "MEAN" until I put the header on.
I am happy with the setup overall, I was just hoping for a fatter midrange and more torque. I'm sure this could be achieved the next dyno day we have. I'm gonna throw down the cash and get as many runs in as possible. also getting an fpr and maybe a fuel rail while i'm at it. One thing is for sure though, I have never heard any other Honda that sounds like mine in the cabin. Truly a sweet sound, especially after Austin helped me smoothe out the curve. I gained around 10 horses at certain rpms. The car feels like new and it runs like a beast. I have to be careful on the freeway now, trying not to vtec in 5th. 4500 rpm vtec Xover owns.
Thanks Austin for organizing the dyno day!!! And thanks Graham for the vids!!!
All the people that flaked missed out.
#17
Honda-Tech Member
Join Date: Sep 2002
Location: Northeast, MA, USA
Posts: 952
Likes: 0
Received 0 Likes
on
0 Posts
Re: Sound clips of the HyTech exhaust...VERY big files (Downeybear1)
The T1R setup I thought sounded the best, but all were awesome
I couldn't believe Austin's car was smoking that much though
I couldn't believe Austin's car was smoking that much though
#18
Honda-Tech Member
iTrader: (1)
Re: Sound clips of the HyTech exhaust...VERY big files (anjapower)
here is my graph
aemcai, T1R 4-2-1 (not power header), T1R catback Version 1, 94066 cat,VAFC set at 4500 rpm
Thanks again Austin, with the little time you spent with it, my midrange is unbelievable. I guess all of us having such similar mods saves us on tuning time. Hopefully we can go to DSR again soon so I can get a little more out of her.
aemcai, T1R 4-2-1 (not power header), T1R catback Version 1, 94066 cat,VAFC set at 4500 rpm
Thanks again Austin, with the little time you spent with it, my midrange is unbelievable. I guess all of us having such similar mods saves us on tuning time. Hopefully we can go to DSR again soon so I can get a little more out of her.
#19
Honda-Tech Member
Join Date: Jun 2002
Location: Future Site of the Runoffs, USA
Posts: 2,882
Likes: 0
Received 0 Likes
on
0 Posts
Re: Sound clips of the HyTech exhaust...VERY big files (anjapower)
i can't tell, was that blue or white smoke??? at first i thought it was white......but then i thought blue. maybe it's the black car that makes it look blue? white is an indicator of burning coolant isn't it? i see you have an aftermarket headgasket.......could that be a potential source of the problem?
travis
just a nissan guy tryin to solve honda problems
travis
just a nissan guy tryin to solve honda problems
#20
Re: Sound clips of the HyTech exhaust...VERY big files (tnord)
i think DSR might put down lower numbers than ATP..
oh yeah, if you want more T1R clips.. i have some from me on the track @ thunderhill and what not...(been posted before)
[Modified by disordeR, 10:26 PM 12/9/2002]
oh yeah, if you want more T1R clips.. i have some from me on the track @ thunderhill and what not...(been posted before)
[Modified by disordeR, 10:26 PM 12/9/2002]
#21
Re: Sound clips of the HyTech exhaust...VERY big files (disordeR)
Great vids Austin. What was some of that popping noise going on? Or was that just the video?
Austin's car is definitely louder than mine. My car sounds very much like IGGY's, sounded almost exactly alike when I dynoed. I'm using HyTech's new custom built resonator and not the Magnaflow so that might make a difference as well as me using a cat.
[Modified by SurferX, 10:56 PM 12/9/2002]
Austin's car is definitely louder than mine. My car sounds very much like IGGY's, sounded almost exactly alike when I dynoed. I'm using HyTech's new custom built resonator and not the Magnaflow so that might make a difference as well as me using a cat.
[Modified by SurferX, 10:56 PM 12/9/2002]
#24
Honda-Tech Member
Thread Starter
Join Date: Sep 2000
Location: Sears Point, CA
Posts: 5,276
Likes: 0
Received 0 Likes
on
0 Posts
Re: Sound clips of the HyTech exhaust...VERY big files (ChapR)
Austin does your car pass smog with your mods?
Austin
#25
Honda-Tech Member
Thread Starter
Join Date: Sep 2000
Location: Sears Point, CA
Posts: 5,276
Likes: 0
Received 0 Likes
on
0 Posts
Re: Sound clips of the HyTech exhaust...VERY big files (disordeR)
i think DSR might put down lower numbers than ATP..
oh yeah, if you want more T1R clips.. i have some from me on the track @ thunderhill and what not...(been posted before)
oh yeah, if you want more T1R clips.. i have some from me on the track @ thunderhill and what not...(been posted before)
Austin