For Sale and WTB - December 2010
#101
Honda-Tech Member
Join Date: Nov 2005
Location: SoCal, Ca, US
Posts: 700
Likes: 0
Received 0 Likes
on
0 Posts
Re: For Sale and WTB - December 2010
FS:/Possible trades:
listed asking prices DO NOT include shipping or paypal fees but PM me im always open to offers if you're buying more then one piece, Email is SDinHD@gmail.com if you want pictures or have offers. sorry just cant load that many pictures
OEM 2000 Type R cylinder head, complete, just hot tanked, comes with vtec solenoid and '97 ItR cams - $900
OEM ItR I.M. w/ IAT sensor, IACV valve & oem itr 62mm throttle body with TPS and MAF - $430
OEM ItR Fuel rail, FPR and ItR fuel injectors w/ all seals - $340
Crower B16a/B18cflat faced valves(used but straight) - $80/set, 16
BNIB JE/SRP 81.5mm ~10.6:1CR pistons w/ JE pro rings, part #149213 - $400
BNIB Eagle 5.430" GsR/ItR connecting Rods, part# CRS5430a3d - $300
Brand new MSD 8.5mm Ignition wires, Part #32349 - $80
BNIB MSD SCI-L ignition control box, Part #6320 - $200
BNIB T1R voltage stabilizer, part# 40000-VP2-P - $75
Brand New MSD Pro red cap, part #82921 - $50
Magnecore B18C5/B series Ignition wires - $40
OEM '01 ItR Valves, IN and EX, (used but good condition) - $120/set, 16
OEM ItR intake side dual valve springs - $75/set, 16
OEM GsR exhaust side valve springs - $40/set, 8
OEM ItR/DC2 steel valve spring retainers - $32/set, 16
OEM '01 USDM ItR P73 rods and pistons - $160
OEM '01 ItR crank pulley - $65
OEM ItR P72/P73/ItR oil pan - $65
OEM ItR chasis/engine/PS rack performance bar/rod - $40
OEM ItR frame end bar/rear hatch(not the rear strut bar) - $50
OEM ItR rear subframe support bar, silver color - $40
OEM USDM ItR front upper strut bar(sides painted red) - $90
OEM USDM ItR 24mm lower sway bar w/ bushings -$80
OEM ItR front end links w/ bushings and nuts - $50
OEM ItR TDC sensor, works fine just replaced since it is plastic - $30
OEM ItR/DC2 timing belt tensioner, bolt and spring - $25
OEM ItR motor/trans/chassis mounts - $150 for all 5 mounts
OEM DC2 driver side fender liner and engine under cover - $40 for both
OEM ItR radiator hoses, upper and lower - $15 for both
OEM ItR front Lower Control Arms w/ bushings - $80
OEM ItR Rear trailing arm bushings - $60
OEM ItR rear toe/compensator arms - $45
OEM ItR front compliance bushings - $75
OEM USDM drivers side axle - $75
OEM USDM ItR rear 22mm sway bar bushings - $5
OEM USDM shift linkage bushing - $3
OEM ItR/DC2 thermostat - $5
OEM ItR thermo switch(towards the rear of car on side of cyl head) - $20
OEM ItR thermo unit(sensor towards front of car on cyl head) - $15
OEM ItR water temp sensor - $15
OEM ItR Oil pres switch - $10
OEM ItR/DC2 Oil dipstick - $4
OEM USDM ItR alternator belt, perfect just i went to CTR N1 - $5
OEM ItR 1" Brake master cylinder - $90
OEM ItR Clutch master cylinder - $60
OEM ItR Clutch slave cylinder - $30
OEM JDM DC2 ItR cf window switches - $75
OEM JDM ItR front 25mm sway bar bushings - $10
OEM JDM front bumper nighthawk black pearl - $150
OEM JDM ItR front lip/chin spoiler, '01 ItR NBP color, needs re-spray probably - $150
OEM '97 USDM ItR CW front bumper, upper piece slight paint damage on right corner - $160
OEM '97 USDM ItR CW front bumper, lower piece slight paint damage on right corner - $70
OEM '97 USDM ItR CW lip/chin spoiler slightly cracked on front right corner but fixable - $245
OEM USDM ItR Cat. Conv. (i think re welded?) - $100
OEM '01 ItR P.P bolts(6) - $20
OEM '01 ItR F.W. bolts(8) - $20
OEM '01 ItR Main bolts (10) - $30
OEM '01 ItR Head Bolts (10) - $60
OEM '97 USDM ItR Fuel Pump - $75
ACT lightweight flywheel - $150
ACT clutch kit - $150
Hondata S200 in chipped OEM OBD1 P28 w/ s200 box - $400
CompTech CAI with filter, complete - $240
DC Sports JDM 4-1 header (dents) - $100
Apex I WS2 Catback(no axle back/muffler section) - $200
ApexI VAFC w/ all harness and manual - $125
OEM front 6-1/2" speakers and tweeters - $75
Kenwood KDC-138 in dash CD player - $40
51225-SR0-A01 - ball dust boot for 92-01 Integra - $2
53546-S84-003 - tie rod boot for 97+Integra, 98+TL/CL, 04-08 TSX - $2
18115-P72-003 - GsR Ex. manifold gasket, oem sealed from honda - $10
AutoMeter Pro-Shift light, 7,500 rpm fuse installed - $25
AutoMeter Pro-Comp oil pressure guage, 0-100psi - $25
BNIB PPi PCX-2200(1600w rms) real 2ch amp, hand built in Tempe AZ - $400
BNIB PPi PCX-480(1280w rms) old school 4ch comp. 'cheater' amp - $350
PPi PCX-250(400w rms) 2ch comp. cheater amp hand built like the other 2 - $150
MB Quart PVF-213 5-14" components with the real german PTF40's - $250
Full OEM IiR PS system w pump/belt - $450
Full OEM ItR AC System w pump/belt - $450
listed asking prices DO NOT include shipping or paypal fees but PM me im always open to offers if you're buying more then one piece, Email is SDinHD@gmail.com if you want pictures or have offers. sorry just cant load that many pictures
OEM 2000 Type R cylinder head, complete, just hot tanked, comes with vtec solenoid and '97 ItR cams - $900
OEM ItR I.M. w/ IAT sensor, IACV valve & oem itr 62mm throttle body with TPS and MAF - $430
OEM ItR Fuel rail, FPR and ItR fuel injectors w/ all seals - $340
Crower B16a/B18cflat faced valves(used but straight) - $80/set, 16
BNIB JE/SRP 81.5mm ~10.6:1CR pistons w/ JE pro rings, part #149213 - $400
BNIB Eagle 5.430" GsR/ItR connecting Rods, part# CRS5430a3d - $300
Brand new MSD 8.5mm Ignition wires, Part #32349 - $80
BNIB MSD SCI-L ignition control box, Part #6320 - $200
BNIB T1R voltage stabilizer, part# 40000-VP2-P - $75
Brand New MSD Pro red cap, part #82921 - $50
Magnecore B18C5/B series Ignition wires - $40
OEM '01 ItR Valves, IN and EX, (used but good condition) - $120/set, 16
OEM ItR intake side dual valve springs - $75/set, 16
OEM GsR exhaust side valve springs - $40/set, 8
OEM ItR/DC2 steel valve spring retainers - $32/set, 16
OEM '01 USDM ItR P73 rods and pistons - $160
OEM '01 ItR crank pulley - $65
OEM ItR P72/P73/ItR oil pan - $65
OEM ItR chasis/engine/PS rack performance bar/rod - $40
OEM ItR frame end bar/rear hatch(not the rear strut bar) - $50
OEM ItR rear subframe support bar, silver color - $40
OEM USDM ItR front upper strut bar(sides painted red) - $90
OEM USDM ItR 24mm lower sway bar w/ bushings -$80
OEM ItR front end links w/ bushings and nuts - $50
OEM ItR TDC sensor, works fine just replaced since it is plastic - $30
OEM ItR/DC2 timing belt tensioner, bolt and spring - $25
OEM ItR motor/trans/chassis mounts - $150 for all 5 mounts
OEM DC2 driver side fender liner and engine under cover - $40 for both
OEM ItR radiator hoses, upper and lower - $15 for both
OEM ItR front Lower Control Arms w/ bushings - $80
OEM ItR Rear trailing arm bushings - $60
OEM ItR rear toe/compensator arms - $45
OEM ItR front compliance bushings - $75
OEM USDM drivers side axle - $75
OEM USDM ItR rear 22mm sway bar bushings - $5
OEM USDM shift linkage bushing - $3
OEM ItR/DC2 thermostat - $5
OEM ItR thermo switch(towards the rear of car on side of cyl head) - $20
OEM ItR thermo unit(sensor towards front of car on cyl head) - $15
OEM ItR water temp sensor - $15
OEM ItR Oil pres switch - $10
OEM ItR/DC2 Oil dipstick - $4
OEM USDM ItR alternator belt, perfect just i went to CTR N1 - $5
OEM ItR 1" Brake master cylinder - $90
OEM ItR Clutch master cylinder - $60
OEM ItR Clutch slave cylinder - $30
OEM JDM DC2 ItR cf window switches - $75
OEM JDM ItR front 25mm sway bar bushings - $10
OEM JDM front bumper nighthawk black pearl - $150
OEM JDM ItR front lip/chin spoiler, '01 ItR NBP color, needs re-spray probably - $150
OEM '97 USDM ItR CW front bumper, upper piece slight paint damage on right corner - $160
OEM '97 USDM ItR CW front bumper, lower piece slight paint damage on right corner - $70
OEM '97 USDM ItR CW lip/chin spoiler slightly cracked on front right corner but fixable - $245
OEM USDM ItR Cat. Conv. (i think re welded?) - $100
OEM '01 ItR P.P bolts(6) - $20
OEM '01 ItR F.W. bolts(8) - $20
OEM '01 ItR Main bolts (10) - $30
OEM '01 ItR Head Bolts (10) - $60
OEM '97 USDM ItR Fuel Pump - $75
ACT lightweight flywheel - $150
ACT clutch kit - $150
Hondata S200 in chipped OEM OBD1 P28 w/ s200 box - $400
CompTech CAI with filter, complete - $240
DC Sports JDM 4-1 header (dents) - $100
Apex I WS2 Catback(no axle back/muffler section) - $200
ApexI VAFC w/ all harness and manual - $125
OEM front 6-1/2" speakers and tweeters - $75
Kenwood KDC-138 in dash CD player - $40
51225-SR0-A01 - ball dust boot for 92-01 Integra - $2
53546-S84-003 - tie rod boot for 97+Integra, 98+TL/CL, 04-08 TSX - $2
18115-P72-003 - GsR Ex. manifold gasket, oem sealed from honda - $10
AutoMeter Pro-Shift light, 7,500 rpm fuse installed - $25
AutoMeter Pro-Comp oil pressure guage, 0-100psi - $25
BNIB PPi PCX-2200(1600w rms) real 2ch amp, hand built in Tempe AZ - $400
BNIB PPi PCX-480(1280w rms) old school 4ch comp. 'cheater' amp - $350
PPi PCX-250(400w rms) 2ch comp. cheater amp hand built like the other 2 - $150
MB Quart PVF-213 5-14" components with the real german PTF40's - $250
Full OEM IiR PS system w pump/belt - $450
Full OEM ItR AC System w pump/belt - $450
Last edited by 4DRDB8GSR; 12-30-2010 at 06:47 PM. Reason: Added OEM ItR Main Bolts, Head Bolts, FW and PP bolts
#102
Honda-Tech Member
Re: For Sale and WTB - December 2010
i'll buy the bare shell w/ badge number if the price is right.
#103
Honda-Tech Member
Join Date: Mar 2008
Location: Obermumpf
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Re: For Sale and WTB - December 2010
ACT lightweight flywheel and clutch kit - $200
Would you ship it to Germany?
#105
Honda-Tech Member
iTrader: (2)
Join Date: Feb 2004
Location: NJ
Posts: 769
Likes: 0
Received 0 Likes
on
0 Posts
Re: For Sale and WTB - December 2010
FS or wtt or wtb: usdm gm type r wheels. i will trade my jdm gm ones plus cash on top. i do not need tires for the usdm wheels. wheels only. please let me know if anyone is interested. located in nj ..tires are potenza's re01r like new condition. looking to get $850 for my wheels+tires . will not come with center caps.
Last edited by danny98r; 12-22-2010 at 12:45 PM.
#109
Honda-Tech Member
Join Date: Mar 2009
Location: Manteca, 209 ...THE TOWN BRUH!!
Posts: 2,531
Likes: 0
Received 1 Like
on
1 Post
Re: For Sale and WTB - December 2010
WTB: type r crank
-must be clean no scarred journals
-also no machining must be original..i don't wanna run over sized bearing
-pm me
-must be clean no scarred journals
-also no machining must be original..i don't wanna run over sized bearing
-pm me
#110
Re: For Sale and WTB - December 2010
I'm looking for a set of red and whiteITR center caps either with A's or H's doesnt matter. can be 1 2 3or all 4 lmk
561-346-5421
561-346-5421
Last edited by DC4 Rasta; 12-17-2010 at 08:38 PM.
#113
Re: For Sale and WTB - December 2010
Selling this 1:25 scale Revell Acura Integra Type R built model kit. Car has full b16 engine details as well as interior and chassis details
asking for 45 shipped for it
i'll post the engine bay pic later
asking for 45 shipped for it
i'll post the engine bay pic later
#114
Honda-Tech Member
Join Date: Aug 2001
Location: all mugen all the time, usa
Posts: 1,422
Likes: 0
Received 0 Likes
on
0 Posts
Re: For Sale and WTB - December 2010
parts i have for sale
98 jdm header $200 small ding
2001 tailights $140
2001 floormats used $120
jdm 16" gunmetals no center caps $600 + shipping has curbs pics up soon
these wheels are in better condition than i thought. several people have pmed me.
i paid $850 for these wheels, #4 is the worst in my honest opinion,
willing to be open minded with offers, it needs to be fair though
paypal only.
98 jdm header $200 small ding
2001 tailights $140
2001 floormats used $120
jdm 16" gunmetals no center caps $600 + shipping has curbs pics up soon
these wheels are in better condition than i thought. several people have pmed me.
i paid $850 for these wheels, #4 is the worst in my honest opinion,
willing to be open minded with offers, it needs to be fair though
paypal only.
Last edited by mugenr#1011; 12-22-2010 at 04:02 PM. Reason: pics
#118
Honda-Tech Member
Join Date: Nov 2005
Location: SoCal, Ca, US
Posts: 700
Likes: 0
Received 0 Likes
on
0 Posts
#119
Honda-Tech Member
Re: For Sale and WTB - December 2010
#121
Honda-Tech Member
Join Date: Nov 2007
Location: Boston, Ma, us
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
Re: For Sale and WTB - December 2010
IntegraType R front seats...300
Jdm 98spec armrest delete...50
Oem Phoenix Yellow Front lip...250
Tanabe Sustec Pro SS Itr Spec Coilover's...400
Mugen Gen 1 Wing ...700...Championship White
Itr 1inch Master Cylinder with Booster...150
BuddyClub Spec 2 Catback exhaust...250
Oem rear valences and sideskirts in phoenix yellow...850
Local pickup unless buyer pays for shipping...
Jdm 98spec armrest delete...50
Oem Phoenix Yellow Front lip...250
Tanabe Sustec Pro SS Itr Spec Coilover's...400
Mugen Gen 1 Wing ...700...Championship White
Itr 1inch Master Cylinder with Booster...150
BuddyClub Spec 2 Catback exhaust...250
Oem rear valences and sideskirts in phoenix yellow...850
Local pickup unless buyer pays for shipping...
Last edited by dc2itr617; 12-28-2010 at 02:49 PM.
#122
Re: For Sale and WTB - December 2010
***Brand New and Never Mounted***
RARE Work RSZ R 15x7 5x114.3 +44 Offset with Valve Stems and Valve Caps
Pics:
These wheels were purchased Brand New in 2005. They were never mounted. They cost over $1700+. These wheels are RARE and are no longer made. They are incredibly super light!
Here is a similar set for $2200: http://www.icbmotorsport.com/worstgu15454.html
I am asking $1490 + shipping + paypal fee.
***NO TRADES for now***
If you have any questions you can call me 410 - 241 - 9027
RARE Work RSZ R 15x7 5x114.3 +44 Offset with Valve Stems and Valve Caps
Pics:
These wheels were purchased Brand New in 2005. They were never mounted. They cost over $1700+. These wheels are RARE and are no longer made. They are incredibly super light!
Here is a similar set for $2200: http://www.icbmotorsport.com/worstgu15454.html
I am asking $1490 + shipping + paypal fee.
***NO TRADES for now***
If you have any questions you can call me 410 - 241 - 9027
#124
Honda-Tech Member
Join Date: Aug 2003
Location: Northern NJ
Posts: 653
Likes: 0
Received 0 Likes
on
0 Posts
Re: For Sale and WTB - December 2010
For Sale:
2000/2001 USDM ITR shift **** with nut (mint) - $100 shipped
****SOLD**** JDM ITR red stitched shift boot (like new) - $30 shipped ****SOLD****
Please PM if interested
2000/2001 USDM ITR shift **** with nut (mint) - $100 shipped
****SOLD**** JDM ITR red stitched shift boot (like new) - $30 shipped ****SOLD****
Please PM if interested
Last edited by GeeReg; 12-21-2010 at 03:51 PM. Reason: Boot Sold