badrat1430

Can anyone help? No one around here is doing FWD'S ! I install rollcage's & do chassis work! Where can i find pics & spec. on how to do these cars right, have had 3 people wanting me to do this I think it would be cool to do IF I CAN DO THEM RIGHT !! Even pics of your own cars would be a big help !!! The first one will be a Integra-R ! HELP IF YOU CAN !!

itr1244

https://honda-tech.com/search.php?do=process

_HANS

iTrader: (1)

i want a cage lol

highroller54

here you go

99hondacura

hahhaha i want that roll cage on my R!!!

badrat1430

OK ! I see you guys have no hp or a death wish ? I guest I made MISTAKE thanking you could help ; guess I will look to NHRA OR IHRA for somekind of class rules case you all are streeracers & all show & no GO !!!!

BoostR41

Ill post up later. I had a 10 pt in my R that was goin to be certified

01-0720

no its the guys in this section dont like to answer questions that have been asked and covered a hundred times before, follow itr1244's link and do a search there are many threads about roll cages on this site


you also need to specify what kind of cage you want to build, is it for road racing, auto cross, drag racing, rally racing etc etc, there all going to be different, best thing to do is figure out what kind of racing your building the cage for, and what sanctioning body and contact them for a rule book, it will have details on what specifications the cage needs to have to be legal in that specific class

GO-FIGHT-KILL

Maybe you should try the fabrication section.

George Knighton

Hang out in the RR Forum and research designs by people like Mitch Piper, who specialise in FWD roll cages (especially Integras) that comply with the NASA CCR and SCCA requirements.

James Evans in Baltimore also puts in FWD, CCR-compliant cages.

You might even want to visit the NASA CCR and start reading it.

People who respond cruelly are not really likely to engage in the sport at the level you'll have to participate to make money. Try not to hold it against them.

badrat1430

Thank you !!!

George Knighton

http://www.pipermotorsport.com/moredetail.asp?id=153

That has some pictures of a cage he designed for a current Koni Challenge Civic.

George Knighton

These are pictures of a dedicated track car, an ITR designed to be H2 Honda Challenge-compliant.

Something you have to be careful of and with is the bar that's behind the dash...and nobody's really going to have pictures of that after it's done. You're going to have to catch that in progress or get in good enough with somebody that he'll tell you.

The windshield post bars are a little tricky. The more of a trapezoidal shape you have, the stronger the design...but if you make it too much of a trapezoid you'll restrict the vision of taller drivers, and too much of a strong trapezoid could also cause a tall driver's helmet to bump the door bar on the left.

GO-FIGHT-KILL

^ That's some pretty high quality work. I'm sure it was cheap.

badrat1430

cool very nice !! thanks for the tips !

BoostR41

the pics of the cages above would NOT pass tech at a drag strip though. if it is drag race cage how fast do you want to go? under 135mph you could do a 6 point. faster than that you will need a full 10pt with window net and certification

Smitdog

It was not so bad years ago when it was done by Mitch Piper.

badrat1430

Yes I am starting to see that I can use like what I put in the 10.5 raidel tire class & LS street ; with a few changes up front around towers, it is drag racing these guys are wanting to do . Kindy hope it takes off around here !!!

mstewar

an ITR drag car in sikeston, eh? interesting..

good luck on the cage build.. lots of good info on doing that is in the RoadRace forum..