Need Help On Install The Brake And Bleed The Brakes?
#1
Thread Starter
Join Date: Nov 2001
Location: Vancouver BC / Taipei Taiwan, Canada
Posts: 1,145
Likes: 0
Received 0 Likes
on
0 Posts
Need Help On Install The Brake Lines And Bleed The Brakes?
i tried to search but there is not much detail of how to install the SS brake lines and bleed the brake properly.. any instruction of how to change the brake lines and bleed the brakes? Any info will be great!! Thanks!!
#2
Re: Need Help On Install The Brake Lines And Bleed The Brakes? (01SpecR)
make sure you have a strong set of plyers or a clamp of some sort when removing the line from the fender wall. That bolt is a pain in the ***. Bleeding the brakes, if you do a search you'll find plenty of detailed instructions
#3
Thread Starter
Join Date: Nov 2001
Location: Vancouver BC / Taipei Taiwan, Canada
Posts: 1,145
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need Help On Install The Brake Lines And Bleed The Brakes? (zer0zer0 TypeR)
thanks.. also when i replace the new brake pads while i brake it makes some sound from the rotors.. is it normal for the new pads? tried search again for " Bleed The Brakes" can't really find a helpful info
#6
Global Moderator
Join Date: Jan 2000
Location: Yokohama, Japan
Posts: 11,470
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need Help On Install The Brake Lines And Bleed The Brakes? (zer0zer0 TypeR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by zer0zer0 TypeR »</TD></TR><TR><TD CLASS="quote">make sure you have a strong set of plyers or a clamp of some sort when removing the line from the fender wall. That bolt is a pain in the ***. Bleeding the brakes, if you do a search you'll find plenty of detailed instructions</TD></TR></TABLE>
If you use a flare nut wrench, you greatly reduce the risk of stripping the nut.
If you use a flare nut wrench, you greatly reduce the risk of stripping the nut.
Trending Topics
#8
Honda-Tech Member
Join Date: Dec 2000
Location: Denver, CO, USA
Posts: 5,108
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need Help On Install The Brake Lines And Bleed The Brakes? (Reid)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Reid »</TD></TR><TR><TD CLASS="quote">
If you use a flare nut wrench, you greatly reduce the risk of stripping the nut. </TD></TR></TABLE>
Out of curiosity - how much of a pain in the *** has one created if that nut gets stripped?
If you use a flare nut wrench, you greatly reduce the risk of stripping the nut. </TD></TR></TABLE>
Out of curiosity - how much of a pain in the *** has one created if that nut gets stripped?
#9
Global Moderator
Join Date: Jan 2000
Location: Yokohama, Japan
Posts: 11,470
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need Help On Install The Brake Lines And Bleed The Brakes? (Flux)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Flux »</TD></TR><TR><TD CLASS="quote">
Out of curiosity - how much of a pain in the *** has one created if that nut gets stripped?</TD></TR></TABLE>
If you strip the nut, you would have to use pliers to loosen/tighten it from then on.
Not necessarily all THAT bad, but a PITA for sure.
Out of curiosity - how much of a pain in the *** has one created if that nut gets stripped?</TD></TR></TABLE>
If you strip the nut, you would have to use pliers to loosen/tighten it from then on.
Not necessarily all THAT bad, but a PITA for sure.
#10
Thread Starter
Join Date: Nov 2001
Location: Vancouver BC / Taipei Taiwan, Canada
Posts: 1,145
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need Help On Install The Brake Lines And Bleed The Brakes? (Dr Pooface)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dr Pooface »</TD></TR><TR><TD CLASS="quote">IM me if you need some help, *****. </TD></TR></TABLE>
thanks Dylan.
thanks Dylan.
#11
Honda-Tech Member
Join Date: Oct 2001
Location: Lost in turbo world, Florida
Posts: 1,321
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need Help On Install The Brake Lines And Bleed The Brakes? (01SpecR)
VICE GRIPS ownz me today on my brakes!!! It got that nut loose and tight but besides that I used a 10mm to turn it. Works for me.
Thread
Thread Starter
Forum
Replies
Last Post
EngineNoO9
Honda Motorcycles
22
05-25-2006 04:58 PM