Help - Need JDM Recaro dimension!
12-26-2004, 11:01 PM
#1
Thread Starter
Join Date: Dec 2002
Location: Pleasanton, CA, usa
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Help - Need JDM Recaro type R dimension!
Hi - trying to see if the JDM type R Recaro suede's will fit in my NSX -
I need the measurement between the outside of back adjuster **** & the frame on opposite side (is there just one **** on the side next to door on each driver or passenger seat or are there two *****, one on each side?)
Modified by D'Ecosse at 8:45 AM 12/27/2004
I need the measurement between the outside of back adjuster **** & the frame on opposite side (is there just one **** on the side next to door on each driver or passenger seat or are there two *****, one on each side?)
Modified by D'Ecosse at 8:45 AM 12/27/2004
12-27-2004, 05:57 AM
#3
Honda-Tech Member
Re: Help - Need JDM Recaro type R dimension! (D'Ecosse)
the ***** are on the inside of the seats (drivers right side of seat, passenger left side), only one **** per seat. I can measure them tonight when i get home.
12-27-2004, 05:53 PM
#4
Thread Starter
Join Date: Dec 2002
Location: Pleasanton, CA, usa
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Re: Help - Need JDM Recaro type R dimension! (Bbasso)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bbasso »</TD></TR><TR><TD CLASS="quote">you want to put those cheesy seats in your NSX???
</TD></TR></TABLE>
So, how many of your 12,000 posts are worthless comments like this?
Thanks for nothing - don't need your sarcasm or "opinions", didn't invite them but you couldn't resist rolling up your post count with one more pathetic unsolicited commentary.
If you don't have anything better to do with your time (you obviously don't with 12K posts) then go bother someone else with your snide comments, I don't need them.
Thanks however to SlapSmak who obviously has nothing to gain than just an honest offer to help someone - that's what a "community" is all about - you might think about generating something constructive Bbasso, or just ignoring if you have nothing positive to say.
</TD></TR></TABLE>
So, how many of your 12,000 posts are worthless comments like this?
Thanks for nothing - don't need your sarcasm or "opinions", didn't invite them but you couldn't resist rolling up your post count with one more pathetic unsolicited commentary.
If you don't have anything better to do with your time (you obviously don't with 12K posts) then go bother someone else with your snide comments, I don't need them.
Thanks however to SlapSmak who obviously has nothing to gain than just an honest offer to help someone - that's what a "community" is all about - you might think about generating something constructive Bbasso, or just ignoring if you have nothing positive to say.
12-27-2004, 07:19 PM
#5
Join Date: Oct 2001
Posts: 1,186
Likes: 0
Received 0 Likes
on
0 Posts
I got approx. 20" from adjustment **** to the other side (blanked where the second **** would be)
Side bolsters (on seat back & seat bottom) stick out further than that measurement though. Approx 21-1/2" (But keep in mind to fit, depends also on the NSX seat rails/sliders; If they center the seat or offset it to the side)
I am willing to trade my set of ITR Recaros for NSX-R Recaros.
Side bolsters (on seat back & seat bottom) stick out further than that measurement though. Approx 21-1/2" (But keep in mind to fit, depends also on the NSX seat rails/sliders; If they center the seat or offset it to the side)
I am willing to trade my set of ITR Recaros for NSX-R Recaros.
Thread
Thread Starter
Forum
Replies
Last Post
GetawayInMoscow
Honda Civic / Del Sol (1992 - 2000)
2
01-25-2006 02:19 PM
yellowturbo
Honda / Acura
27
03-09-2005 12:38 AM
