Which head is this?? Type R, B16,Gsr,????
#1
I am a bad person
Thread Starter
Which head is this?? Type R, B16,Gsr,????
I sent this head to customer who returned back telling me that is not what i said it is. I pulled it off the car with my own hands and i know what type of head it is unless when the machine shop rebuilt it with new valve seals they did the switcharoo which i doubt happened. post only if you are 100% positive that you know what is. thanks
Modified by MotorMatrix.com at 1:07 AM 6/1/2003
Modified by MotorMatrix.com at 1:07 AM 6/1/2003
#4
Honda-Tech Member
Re: Which head is this?? Type R, B16,Gsr,???? (Reid)
It's clearly a B16 head, but do you have a picture of the intake ports?
#5
Re: Which head is this?? Type R, B16,Gsr,???? (FyrStarter)
nope....thats a d15 head, basically worthless. out of the kindness of my heart i'll take it off your hands. hows twenty bucks shipped sound?
#7
I am a bad person
Thread Starter
Re: Which head is this?? Type R, B16,Gsr,???? (MARC P)
this head was sandblasted and rebuilt dont forget. I knew i was going to get mixed responses. keep the responses coming
Trending Topics
#8
Honda-Tech Member
Join Date: Jun 2000
Location: Tampa, FL
Posts: 1,768
Likes: 0
Received 0 Likes
on
0 Posts
Re: Which head is this?? Type R, B16,Gsr,???? (MotorMatrix.com)
It is an ITR head. Not sure what year.
The reason I think this is because:
1. It has the bright green paint that is on all of the ITR heads that I have bought. This is evident in the last pic on the left hand side of the head. It is painted on top of the spot that corresponds with the rear mounting post of the distributor. It's hard to describe but those who know will understand what I am saying.
2. It is most likely newer than 1996. The reason I think this is because there are only two studs for the exhaust manifold. The '96-up B-series heads only had two studs.
I may be wrong. But, I would definitely bet that it is an ITR head. The way to check is to look inside the ports to see if it has been ported from the factory.
-kenji
[Modified by kenji, 10:28 AM 2/13/2003]
[Modified by kenji, 10:29 AM 2/13/2003]
The reason I think this is because:
1. It has the bright green paint that is on all of the ITR heads that I have bought. This is evident in the last pic on the left hand side of the head. It is painted on top of the spot that corresponds with the rear mounting post of the distributor. It's hard to describe but those who know will understand what I am saying.
2. It is most likely newer than 1996. The reason I think this is because there are only two studs for the exhaust manifold. The '96-up B-series heads only had two studs.
I may be wrong. But, I would definitely bet that it is an ITR head. The way to check is to look inside the ports to see if it has been ported from the factory.
-kenji
[Modified by kenji, 10:28 AM 2/13/2003]
[Modified by kenji, 10:29 AM 2/13/2003]
#13
Re: Which head is this?? Type R, B16,Gsr,???? (ragejed)
This is evident in the last pic on the left hand side of the head. It is painted on top of the spot that corresponds with the rear mounting post of the distributor. It's hard to describe but those who know will understand what I am saying.
#14
Honda-Tech Member
Join Date: Mar 2002
Location: Southern California, U.S.A.
Posts: 9,854
Likes: 0
Received 4 Likes
on
4 Posts
Re: Which head is this?? Type R, B16,Gsr,???? (MotorMatrix.com)
Looks like an ITR head from the green paint by the distributor end of the head and the stamped number by where the vtec solenoid goes.
#16
Honda-Tech Member
Join Date: Jul 2001
Location: South, FL, USA
Posts: 3,151
Likes: 0
Received 0 Likes
on
0 Posts
Re: Which head is this?? Type R, B16,Gsr,???? (ragejed)
Ya..what green paint?
[Modified by MARC P, 4:34 PM 2/13/2003]
#17
B*a*n*n*e*d
iTrader: (2)
Join Date: Mar 2001
Location: Charleston, SC
Posts: 3,337
Likes: 0
Received 0 Likes
on
0 Posts
Re: Which head is this?? Type R, B16,Gsr,???? (MARC P)
I am a bit colorblind, but I still dont see the paint...and I am not THAT old yet...
[Modified by FAST4DR, 9:56 PM 2/13/2003]
[Modified by FAST4DR, 9:56 PM 2/13/2003]
#18
Honda-Tech Member
Re: Which head is this?? Type R, B16,Gsr,???? (MaliceGSR)
97 ITR's have PR3 heads?!!! i thought ITR heads were stamped P73
i could swear thats a 1st gen B16 head
i could swear thats a 1st gen B16 head
Is that green paint? I took it as a jpg compression artifact.. which there's plenty of in those pics..
#22
Re: Which head is this?? Type R, B16,Gsr,???? (FyrStarter)
all ITR heads are stamped PR3.
Is that green paint? I took it as a jpg compression artifact.. which there's plenty of in those pics..
#23
Honda-Tech Member
iTrader: (2)
Join Date: Mar 2002
Location: Woodbridge, NJ, Middlesex
Posts: 5,828
Likes: 0
Received 1 Like
on
1 Post
Re: Which head is this?? Type R, B16,Gsr,???? (b19coupe)
and the stamped number by where the vtec solenoid goes.
Greg
#24
Honda-Tech Member
Re: Which head is this?? Type R, B16,Gsr,???? (CHEETAH)
ok now the magical question how much are you selling it??
since he doesn't want it i bet someone else on this board would buy it....
since he doesn't want it i bet someone else on this board would buy it....
#25
Honda-Tech Member
Join Date: Mar 2002
Location: Southern California, U.S.A.
Posts: 9,854
Likes: 0
Received 4 Likes
on
4 Posts
Re: Which head is this?? Type R, B16,Gsr,???? (CHEETAH)
if you mean the "30" usually stamped on the head, that is also on the 99+ Si heads as well ... not just ITR heads.
Greg