how install honda Emblems? I searched but coulent find anything
#1
Thread Starter
Join Date: Nov 2006
Location: Calgary, Canada
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
how install honda Emblems? I searched but could not find anything
Hi I am new to the site and am just wondering how to put new honda emblems on my R?
I looked for past threads and could not find any. thanks.
I looked for past threads and could not find any. thanks.
#2
Honda-Tech Member
Join Date: Sep 2006
Location: Cincinnati, OH, United States
Posts: 793
Likes: 0
Received 0 Likes
on
0 Posts
Re: how install honda Emblems? I searched but could not find anything (Jared type R)
Hair dryer on medium setting on the current emblem. Once you get the glue behind the emblem use dental floss to work the glue off the car.
Once the emblem is off lightly rub bug and tar remover to get excess glue off.
Once the surface is clean wash with soap, then dry.
If you bought OEM acura or honda badges you just peel the protective film off and stick the emblem off there.
NOTE: if you bought the JDM type R FRONT badge I believe you have to shave a notch off (I'm not 100% sure on this, I've never done it) maybe someone else can chime in on the JDM hood emblem.
Once the emblem is off lightly rub bug and tar remover to get excess glue off.
Once the surface is clean wash with soap, then dry.
If you bought OEM acura or honda badges you just peel the protective film off and stick the emblem off there.
NOTE: if you bought the JDM type R FRONT badge I believe you have to shave a notch off (I'm not 100% sure on this, I've never done it) maybe someone else can chime in on the JDM hood emblem.
#3
Honda-Tech Member
Join Date: Dec 2005
Location: ontario, ca, usa
Posts: 560
Likes: 0
Received 0 Likes
on
0 Posts
Re: how install honda Emblems? I searched but could not find anything (LunchboxZT)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LunchboxZT »</TD></TR><TR><TD CLASS="quote">Hair dryer on medium setting on the current emblem. Once you get the glue behind the emblem use dental floss to work the glue off the car.
Once the emblem is off lightly rub bug and tar remover to get excess glue off.
Once the surface is clean wash with soap, then dry.
If you bought OEM acura or honda badges you just peel the protective film off and stick the emblem off there.
NOTE: if you bought the JDM type R FRONT badge I believe you have to shave a notch off (I'm not 100% sure on this, I've never done it) maybe someone else can chime in on the JDM hood emblem.</TD></TR></TABLE>
Also the rear Honda badge on the left side of the trunk needs to have one of the tabs knocked off.. I belive it's the far left one.
Once the emblem is off lightly rub bug and tar remover to get excess glue off.
Once the surface is clean wash with soap, then dry.
If you bought OEM acura or honda badges you just peel the protective film off and stick the emblem off there.
NOTE: if you bought the JDM type R FRONT badge I believe you have to shave a notch off (I'm not 100% sure on this, I've never done it) maybe someone else can chime in on the JDM hood emblem.</TD></TR></TABLE>
Also the rear Honda badge on the left side of the trunk needs to have one of the tabs knocked off.. I belive it's the far left one.
Thread
Thread Starter
Forum
Replies
Last Post