pwrdbyhonda

I know the s2000 one will work, I have heard the accord v6 but im not sure. So fill me in on which cars have the same collector gasket? thanks
Dave

jdmspoonitr

iTrader: (1)

just get s2000 not that expensive

GRAVEDIGGER

And maybe the Acura Legends, both dealers will have one or can get it!

pwrdbyhonda

its 30bucks from the dealer, im just checkin to see if there are anymore car that have the same gasket before i go buy it. See if i can save a couple bucks

mugenracer

sorry for butting into this thread but can anyone tell me the exact size/width of an S2000 donut gasket. I removed the header on my 96spec ITR and found it to be exactly 2.5" wide (OD) and the RSR header i was putting on had a 2.38" OD gasket. The 96spec has a double walled collector (like the 98spec 4-1) with OD of 2.5 and ID of 2.38" The gasket that came with the RSR header was messed up and i thought i could use my OE one but its too big, so where do i get a 2.38" gasket (60.5mm)???

Track rat

I found one at a Midas Muffler shop for $8. They had an assortment of all sizes from about 1.5" ID to 2.5"ID.