acivichb

Hey everyone on ht. I've been on here for years went threw many Hondas threw out those years... I got out of the scene for years but got back in to it when I bought me a 2000 Acura integra ls. It came with generic coilovers,asr subframe brace, skunk2 lca, and a b18c type r motor and lsd trans... The guys I bought it from used the stock ls wiring harness just have to wire up the vtec and everything was good... I got the car in early November.I realized that the shocks were dead so I bought me a set of skunk2 pro c coilovers for Black Friday.. Thanks jhpusa...Replaced the shocks and relized that the bushing were shot. I ordered a set of front camber kit from hard race which I'm going to install tomorrow.. I plan on building this car... Since I bought the car I've been stocking up on some parts.. I've got a itr 5 lug conversion and advan rg's in 16x8 +30.. Just put some fresh falken azenis on them... I also have hard race compliance bushings, front lower control arms, and rear camber kit, ebc green stuff front and rear brake pads and ebc rotors.. Nuff talk time for some pics sorry I'm not a guy to take pics of my ride as I progress with parts but I am going to try make this one work... I got a few pics after I installed the coilovers..time for some pics.:.. Will post pics when can ...

acivichb

So I bought a s2k cluster from eBay and wire harness kit from wireworx and it took 8 weeks for the wire harness to get here but finally did.

acivichb

Here's just some more pics

acivichb

Here the rims with azenis on them... Rg's is 16x8+30 falken azenis in 215/45r16

acivichb

Thanks...




Today got around to installing a set of hardrace front camber kit with hardened bushings and a set of hardrace front lower control arms with hardened bushing too... And don't mind the wheel rub marks on the fender wells.. The guys that had it before me had it slammed... Wasn't really my style...

MotorMouth93

iTrader: (1)

On those spots where the wheels rubbed through the paint and have started rusting, it would be a good idea to sand the rust off with 80 grit, mask off the surrounding area, spray it with 2k epoxy to protect it, and finish it off with some more undercoat.

acivichb

Thanks yah I was going to do that when I do the 5 lug since I have to rip it all out.. I just replaced the lower compliance bushings with hardrace hardend ones lastnight.. Have the rear toe and tie bars along with the trailer arm bushings... Also ordered the 4 oem hard front brake lines from the rs integra to remove the abs. And the prop valve from a rs as well.....

PowerDraw

Any other modifications to the wiring or is the wire harness kit for the S2k cluster plug and play? Looks good.

acivichb

There's only 5 wires you have to wire up super easy... The rest was all plug and play... And thanks

acivichb

So I replaced the seats that came with the car (del sol) with some minty si's

acivichb

So I decided to pull the motor out... There was a 97 spec type r in it..... Just going to start cleaning some stuffs up... Soon removing the abs...

acivichb

As she sits patiently waiting....

Deetz

Everything looks good, except, those seats. The entire generation from 96-00 civic had the "worst" seats Honda ever designed. They sit much higher up, have next to nothing for bolstering, and very little support. I find them uncomfortable

A DC2 seat is far Superior

acivichb

Yah saw that before I bought it but I wanted to be up higher... I like the feel of them plus since I'm on an island there's not much for junkyards here or near me so I just take what I got... Was going to order some seats but shipping killed that...

acivichb

So I sold my type R motor and trans just waiting for the new heart to get it... Should be here soon I ordered it in the beginning of February... I'll get some pics up soon of some of the things I have so far... Going to start deleting the abs today too so when I get home from work I'll get some pics up...

j13

iTrader: (2)

Nice build man, in really hoping you are going K series or nothing less than a low mile dc2 ITR changeover

acivichb

THANKS J13 yah I plan on doing a kswap...
����������

When I got home yesterday from work...

acivichb

Another pic didn't open it up yet but when I do y'all well be some of the first to see it...

acivichb

I got off this afternoon and ripped the dash board off with the help of a friend...

acivichb

After I removed the dash board I started to remove the abs lines and the abs module...

ievaq8

good luck with the build

EnjoyTheRideDC2

iTrader: (1)

Higher up in an Integra? Couldn't imagine what kind of positive gain that provides.

acivichb

Ievaq8 thanks

EnjoyTheRideDC2. For me I like it.... If you read from what the car came with which was del sol seats. Those were my 2 options the si or the sol.. I rather be hi then low...

acivichb

So I removed the passenger side mount and the abs module and lines... Also removed the canister in the back on the passenger side..

acivichb

Here's some more pics..