CPreston

how do you remove the weatherstripping around windows, windsheilds, and on the top of the car on a 3rd gen integra?

OrangeTeggy

for the (on top of the car) pretty sure you pull it out and then up.

95DC2GS-R

The side moldings on the windshield pop off, but be careful because the clips break easily. The top molding on the windshield is put on the windshield when it's glued in the car. You can't replace that one unless you have the windshield taken out and reinstalled.

The rubber around the quarter glass is molding into the quarter glass itself, so to replace that, you have to replace the whole glass.

The moldings on the roof (rain gutters) is easy to take off. You push them back, and pull them up to pop off the clips, same as the front.

sp00ledbseries

Those clips break very easily and are not cheap

95DC2GS-R

At $3 a pop, that's not too too bad, but it sucks when you have to buy like 10 of them.

One of windshield moldings flew off on the highway at night while racing, so I had to replace it, that damn thing was $78! I ended up just buying them for both sides, and it came with all the clips.

OrangeTeggy

How do you install one, Mine aroudn the windshield fell off and I cant get it on

and 98DC2G-R- I called honda and I got that pricing and for the weather striping on the roof it was around $50

95DC2GS-R

It's usually a pain in the *** with old clips, because they always break. You have to get it lined up perfectly with all the clips.

The moldings for the roof can be found for $36 a piece on Acuraoemparts.com