Untitled001's DB7 Slow Build
#1
Honda-Tech Member
Thread Starter
Untitled001's DB7 Slow Build
So I have been a long time lurker on the forum, and I never thought about doing a build thread until now. I originally had a 1995 Civic coupe that I had for a while. I don’t have many pics. Long story short, I wanted something different and bigger so I sold the shell. Shortly after I bought the 1994 Acura Integra LS 4 Door which is my current car. I am still trying to figure out what direction to go with the car. I don’t plan on doing anything too crazy because the car will be my daily. Thanks for looking! Sorry for the cell phone pics
I have had the car for a little more than a month, so I have to play catch up.
Here is my old coupe
Pulling the motor to get rebuilt. April 20th 2012
*May 4th 2012* I started collecting some parts to rebuild my GSR a while ago. The plan for the engine is as follows. The block is in the shop, but I will be out of town for a while so I’ll pick it up when I get back.
USDM B18C1
Top and Bottom-End Refresh all seals and gaskets
81.5mm PCT Pistons & rings (already have)
ACL Rod Bearings
ITR Head (already have)
ITR Intake Manifold (already have)
3-Angle Valve job
ITR Camshafts
ITR Valvetrain (already have)
Skunk 2 Alpha Series Throttle body
New Header (haven’t decided)
Exedy OEM Spec Clutch
Exhaust (haven’t decided)
Hondata S300 (already have)
Hondata IMG
S80 Tranny GSR
The list will probably change. Lol
**May 30th 2012**Came back from my trip and the block is done!
Parts are waiting for me
The coupe being sold. I kinda miss that car already.
**June 6th 2012**And here is the Integra when I first got it
It has some paint fade but all of the panels are good and no rust. It has a JDM Type-r Conversion but the panels are all fiberglass. The fitment is terrible. I will have to redo it. And there is cardboard filling the gaps. Yes,…..cardboard.
The car was in decent shape but there were a lot of short cuts taken. Clutch didn’t work, Brakes didn’t work. Only one window rolls down. The P/S and A/C was removed but the left the lines. I will just remove it all.
It came with a JDM B16A that was built supposedly. With ITR pistons and JUN Stage 3 Cams and Skunk 2 Valvetrain. We will see later.
So I popped off the Distributor and valve cover to see if the motor really has JUN Camshafts. And it does!! I’ll be using these for the GSR.
**July 20th 2012**I fixed the brakes but I can’t figure out what going on with the clutch. So I am going to pull the motor and swap the GSR in. I don’t want to do it but I need the car for work. So let the fun begin.
Progress
The swap is in
**July 24th 2012**WTF!!!!!!!!! So who ever did the front conversion did a terrible job at welding the T-Bar. Long story short, the front end fell off while I was jacking up the car. Afterwards I looked around and there were only like 6 tack welds holding this front on!!!!! Thank god I haven’t driven this car yet. The good news is now I have an excuse to get a new front!!
2 weeks later the freight fairy came!!!
All OEM Panels
Doing it right this time
The new front
That’s all for now.
I have had the car for a little more than a month, so I have to play catch up.
Here is my old coupe
Pulling the motor to get rebuilt. April 20th 2012
*May 4th 2012* I started collecting some parts to rebuild my GSR a while ago. The plan for the engine is as follows. The block is in the shop, but I will be out of town for a while so I’ll pick it up when I get back.
USDM B18C1
Top and Bottom-End Refresh all seals and gaskets
81.5mm PCT Pistons & rings (already have)
ACL Rod Bearings
ITR Head (already have)
ITR Intake Manifold (already have)
3-Angle Valve job
ITR Camshafts
ITR Valvetrain (already have)
Skunk 2 Alpha Series Throttle body
New Header (haven’t decided)
Exedy OEM Spec Clutch
Exhaust (haven’t decided)
Hondata S300 (already have)
Hondata IMG
S80 Tranny GSR
The list will probably change. Lol
**May 30th 2012**Came back from my trip and the block is done!
Parts are waiting for me
The coupe being sold. I kinda miss that car already.
**June 6th 2012**And here is the Integra when I first got it
It has some paint fade but all of the panels are good and no rust. It has a JDM Type-r Conversion but the panels are all fiberglass. The fitment is terrible. I will have to redo it. And there is cardboard filling the gaps. Yes,…..cardboard.
The car was in decent shape but there were a lot of short cuts taken. Clutch didn’t work, Brakes didn’t work. Only one window rolls down. The P/S and A/C was removed but the left the lines. I will just remove it all.
It came with a JDM B16A that was built supposedly. With ITR pistons and JUN Stage 3 Cams and Skunk 2 Valvetrain. We will see later.
So I popped off the Distributor and valve cover to see if the motor really has JUN Camshafts. And it does!! I’ll be using these for the GSR.
**July 20th 2012**I fixed the brakes but I can’t figure out what going on with the clutch. So I am going to pull the motor and swap the GSR in. I don’t want to do it but I need the car for work. So let the fun begin.
Progress
The swap is in
**July 24th 2012**WTF!!!!!!!!! So who ever did the front conversion did a terrible job at welding the T-Bar. Long story short, the front end fell off while I was jacking up the car. Afterwards I looked around and there were only like 6 tack welds holding this front on!!!!! Thank god I haven’t driven this car yet. The good news is now I have an excuse to get a new front!!
2 weeks later the freight fairy came!!!
All OEM Panels
Doing it right this time
The new front
That’s all for now.
Last edited by untitled001; 08-09-2012 at 04:21 PM.
#2
Honda-Tech Member
Join Date: Aug 2010
Location: Washington
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
Re: Untitled001's DB7 Slow Build
car looks great man, shitty that the front end fell off, i would have been pissed lol.. keep up the great work, look forward to seeing more!
#5
Honda-Tech Member
Thread Starter
Re: Untitled001's DB7 Slow Build
The radiator support wasnt salvagable at all I had to throw it out.
#7
Honda-Tech Member
Thread Starter
Trending Topics
#8
Honda-Tech Member
Thread Starter
Re: Untitled001's DB7 Slow Build
****Update**** So I fired up the motor for the first time and there is this weird knocking coming from the intake side of the block. It doesn't really sound like rod knock, and only really does it when it around 2500 rpm+ intermitently. So I am towed the car to the shop to figure out what going on. I'll keep you posted.
Last edited by untitled001; 08-09-2012 at 04:21 PM.
#9
Honda-Tech Member
Thread Starter
Re: Untitled001's DB7 Slow Build
**Update** It looks like the sound may be wrist pin slap. smh.... oh well gotta fix it... on a postive note I will be upgrading my Valvetrain to SuperTech springs and retainers. So I will now be able to run the Jun Camshafts. Thats all for now.
#11
Honda-Tech Member
Thread Starter
Re: Untitled001's DB7 Slow Build
So the engine was taken to the machine shop and found that one of them had a collapsed skirt. Everything else checked out good, so the block will be honed again and reassembled with new pistons. Ill try to get pics soon.
#12
Honda-Tech Member
Join Date: Jan 2006
Location: Tucson, AZ, USA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Re: Untitled001's DB7 Slow Build
damn that is so shitty about the front end... none of the body panels that are already painted black are salvageable tho?
#13
Honda-Tech Member
Thread Starter
#17
Honda-Tech Member
Thread Starter
#18
Honda-Tech Member
Thread Starter
Re: Untitled001's DB7 Slow Build
So the block is still at the machine shop. I hope to have it back by tomorrow. I picked up a new toy. Ill post pics soon.
#19
Honda-Tech Member
Thread Starter
Re: Untitled001's DB7 Slow Build
SOO I am still waiting on the block. I have gotten my Valvetrain and new Rywire Harness ordered. I should have those any day. So I hope to have the DB back together in the next week or two. As I promised, here is my new pride and joy!!
A 2000 Integra Type-R hope you enjoy!
A 2000 Integra Type-R hope you enjoy!
#20
Honda-Tech Member
Thread Starter
Re: Untitled001's DB7 Slow Build
So I will be parting out the 4 door. I will post a thread in the classifieds. This thread will more than likely be taken over by the ITR.
Thread
Thread Starter
Forum
Replies
Last Post
pblockfinest
Appearance Build Threads
485
07-08-2016 10:47 AM