forum116

Like it says my car wont start, just turns over. It is a 90 integra. I just finished a turbo install, and replaced pistons rods and a new head, walbro 255 fuel pump good fuel pressure. Here is the list of things i have tried. I am getting fuel looked in each cylinder, I am getting spark, Timing is on. The ECU is chipped using turboedit, tried a different stock ecu. If I let it sit for a while it will try to fire. It's like it is just flooding itself and wont fire. Looking for some thoughts.


Modified by forum116 at 6:51 AM 6/2/2005

EKB18BPR3

u probably have the tps and map sensors switched around. that was my problem when i took my motor apart and put it back together. if u were closer to brainerd, id be able to help out but theres more HT guys down in the cities so just ask around.

forum116

I will check that out. Anyone else have any ideas for me.

Jwbetley

try starting it with-out the charge pipe, but dont drive it like that. Worked for my friends talon.

forum116

I tried that late last night with no luck. Tonight I am going to check everything again. like firing order, spark, fuel. You can never check to many times.

forum116

It came really close to starting last night after I got some new spark plugs. I might try to find a good distribtor and swap it out.

Jwbetley

Are you running any codes? Is everything correctly installed. Check that your injectors are flowing at thte correct immpedence. Make sure your dont have both cams 180 degrees over turned. Wish i could be more help. Good luck.

Greddy Dantegra

main relay or battery?