s2k seats in a DA tegy.
12-19-2005, 10:59 PM
#1
Thread Starter
Join Date: Mar 2005
Location: Wildomar, CA, U.S.A
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
s2k seats in a DA tegy.
has anyone have s2000 seats in there DA integra? what brackets did you use and so on? I was thinking of swaping the seats in my S for some brides and putting my S seats in my DA. what do you guys think.
at the end of the week I get my da back form the shop so I can put them side by side to try and to imagine what it could look like, lol
at the end of the week I get my da back form the shop so I can put them side by side to try and to imagine what it could look like, lol
12-19-2005, 11:12 PM
#3
Thread Starter
Join Date: Mar 2005
Location: Wildomar, CA, U.S.A
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Re: s2k seats in a DA tegy. (2000turbogsr)
yeah I was just looking at some pics of other cars with these seats they look pretty hot. what brackets and rails did you use for your dc2?
12-19-2005, 11:45 PM
#4
Honda-Tech Member
Join Date: May 2004
Location: Wrenching and Drinkin', Montana
Posts: 4,346
Likes: 0
Received 0 Likes
on
0 Posts
Re: s2k seats in a DA tegy. (Mugen Powered EP)
cut and weld... or take your old seats apart, the new seats apart, and swap the pans.... when I get my S2K's (If I ever find ****** blue ones), IM gonna be swapping pans, so they fit properly, and all the holes line up.
You could fab and weld it so it works, but i'd prefer the "stock" looking brackets myself that is achieved from swapping pans.
You could fab and weld it so it works, but i'd prefer the "stock" looking brackets myself that is achieved from swapping pans.
12-19-2005, 11:58 PM
#5
Honda-Tech Member
Join Date: Sep 2003
Location: jacksonville, fl
Posts: 7,421
Likes: 0
Received 0 Likes
on
0 Posts
well dont the s2k seats bolt into the dc/eg chassis's, from what i gather all the bolts line up. if that is true the 3 of the 4 bolts will line up in the DA
12-20-2005, 06:38 AM
#6
Junior Member
Join Date: May 2005
Location: new york, ny, downtown
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
Re: s2k seats in a DA tegy. (Mugen Powered EP)
i think u can swap the seat pans out..i did it to a set of blue s2k seats in my 92 bubble ....only kid on the block wit fully reclined s2k seats and its easy cause the seats are basically sleeves help on by clips took me hour to do two seats
12-20-2005, 07:53 AM
#7
Member
Join Date: Aug 2005
Location: Cen Cal..., USA
Posts: 1,424
Likes: 0
Received 0 Likes
on
0 Posts
Re: (projectTeG)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by projectTeG »</TD></TR><TR><TD CLASS="quote">well dont the s2k seats bolt into the dc/eg chassis's, from what i gather all the bolts line up. if that is true the 3 of the 4 bolts will line up in the DA</TD></TR></TABLE>
This sounds about right. Even when I got my seats put in (my DA) I still needed to custom fab and weld the brackets. Any welding shop and some exhaust shop could put them in.
This sounds about right. Even when I got my seats put in (my DA) I still needed to custom fab and weld the brackets. Any welding shop and some exhaust shop could put them in.
Thread
Thread Starter
Forum
Replies
Last Post
