Replacing coolant hose from TB to upper rad. hose?
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2002
Location: Destroying turbo ITR motors in Minneapolis, MN, U.S.A.
Posts: 7,942
Likes: 0
Received 0 Likes
on
0 Posts
Replacing coolant hose from TB to upper rad. hose?
A coolant line running from the TB to upper radiator hose has sprung a small leak, and I need to replace it. It looks to be about a 3/8" hose, possibly smaller. This is on a 96 GSR motor.
Should I get a replacement hose from Acura, or what type of hose should I use from a parts or hardware store? Would I need fuel hose, or heater hose, etc?
Should I get a replacement hose from Acura, or what type of hose should I use from a parts or hardware store? Would I need fuel hose, or heater hose, etc?
#2
Re: Replacing coolant hose from TB to upper rad. hose? (boostincoupe)
Here is a link to various water hoses on the 96 GSR:
http://www.acuraparts247.com/s...ch=no
It's up to you where you want to pick up the hose. I usually prefer to go to Honda/Acura for the hoses, as they are exact fit (with the right bends) and usually are not very expensive.
http://www.acuraparts247.com/s...ch=no
It's up to you where you want to pick up the hose. I usually prefer to go to Honda/Acura for the hoses, as they are exact fit (with the right bends) and usually are not very expensive.
#3
Honda-Tech Member
Thread Starter
Join Date: Jun 2002
Location: Destroying turbo ITR motors in Minneapolis, MN, U.S.A.
Posts: 7,942
Likes: 0
Received 0 Likes
on
0 Posts
Re: Replacing coolant hose from TB to upper rad. hose? (tech8)
That is so damn confusing to look at
For under $10, I'll just swing by the dealer
For under $10, I'll just swing by the dealer
#4
Honda-Tech Member
Thread Starter
Join Date: Jun 2002
Location: Destroying turbo ITR motors in Minneapolis, MN, U.S.A.
Posts: 7,942
Likes: 0
Received 0 Likes
on
0 Posts
Re: Replacing coolant hose from TB to upper rad. hose? (boostincoupe)
Is it true that I can just use 3/8" fuel hose to replace the ripped coolant hose?
At least, as a temporary fix?
At least, as a temporary fix?
#5
Honda-Tech Member
Thread Starter
Join Date: Jun 2002
Location: Destroying turbo ITR motors in Minneapolis, MN, U.S.A.
Posts: 7,942
Likes: 0
Received 0 Likes
on
0 Posts
Re: Replacing coolant hose from TB to upper rad. hose? (boostincoupe)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boostincoupe »</TD></TR><TR><TD CLASS="quote">Is it true that I can just use 3/8" fuel hose to replace the ripped coolant hose?
At least, as a temporary fix? </TD></TR></TABLE>
At least, as a temporary fix? </TD></TR></TABLE>
Thread
Thread Starter
Forum
Replies
Last Post