PROJECT: Free Integra aka DirtyDA
#701
Honda-Tech Member
Re: PROJECT: Free Integra aka DirtyDA
Yeah ummm im goin 2 u bro when i start my build thread next month lmao! . I don't have no space here in lil hazy and the tools are sexy.
Last edited by teggyluva90; 04-07-2012 at 09:14 PM.
#703
Re: PROJECT: Free Integra aka DirtyDA
i hate you right now lol.... i wish i had tht box so sick and all them tools... i have a bloody blue point 5 drawer box. which to me was over priced but gotta have a tool box .... good **** man nice tool boxes and tools ...mark ur name and watch out for thieves at work just saying
#704
Honda-Tech Member
Thread Starter
Join Date: May 2010
Location: Suburbs of Philadelphia
Posts: 3,706
Likes: 0
Received 2 Likes
on
2 Posts
Re: PROJECT: Free Integra aka DirtyDA
Thanks GRIM There's nothing wrong with a 5 drawer box, especially a blue-point one! Although before you know it, you have enough tools for 10 drawers being shoved in 5 hahah.
About the thieves, I don't have to worry about that, the shop I'm in is at the County Courthouse, and the only people that walk through our garage is cops, because they park on the lower level of our shop. And there are only 3 other techs beside myself, and they wouldn't take anything.
Now if I were in a shop somewhere else, trust me, I would keep my Glock 19 with a full magazine next to it in the top side drawer
About the thieves, I don't have to worry about that, the shop I'm in is at the County Courthouse, and the only people that walk through our garage is cops, because they park on the lower level of our shop. And there are only 3 other techs beside myself, and they wouldn't take anything.
Now if I were in a shop somewhere else, trust me, I would keep my Glock 19 with a full magazine next to it in the top side drawer
#705
Honda-Tech Member
Thread Starter
Join Date: May 2010
Location: Suburbs of Philadelphia
Posts: 3,706
Likes: 0
Received 2 Likes
on
2 Posts
Re: PROJECT: Free Integra aka DirtyDA
Well the other day I finally got around to getting my Type-r Rep header installed. Tried to notch the crossmember with it still in, no go.. Had to drop it, and I still need to notch it before I put it back in.
My big tank broke a line so I hade to use the little one lol.
Someone ran into my car! I think it was one of my friends and they didn't tell me....
I'm a little worried about the clearance of the 4-1
My big tank broke a line so I hade to use the little one lol.
Someone ran into my car! I think it was one of my friends and they didn't tell me....
I'm a little worried about the clearance of the 4-1
#707
Honda-Tech Member
Re: PROJECT: Free Integra aka DirtyDA
Holy ish that thing hangs low! Btw, Just look for black paint around their car, haha It looks Like it just repainted whatever contacted it hahaha
#708
Honda-Tech Member
Thread Starter
Join Date: May 2010
Location: Suburbs of Philadelphia
Posts: 3,706
Likes: 0
Received 2 Likes
on
2 Posts
Re: PROJECT: Free Integra aka DirtyDA
^^ I looked on my all of my families cars and a few of my friends, haven't been ably to look at my friends car whom I think did it lol.
@D.A9 GUY, it was actually only like 80-100 bucks IIRC, it's a DNA Performance one off ebay. I cheaped out since it's only temporarily.
@D.A9 GUY, it was actually only like 80-100 bucks IIRC, it's a DNA Performance one off ebay. I cheaped out since it's only temporarily.
#709
Honda-Tech Member
Join Date: Apr 2011
Location: Hudson Valley, NY
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
Re: PROJECT: Free Integra aka DirtyDA
Not trying to burst your bubble, but flip that header man. Those PA roads will eat it alive and you'll drag it if you plan on being low.
#710
Honda-Tech Member
Thread Starter
Join Date: May 2010
Location: Suburbs of Philadelphia
Posts: 3,706
Likes: 0
Received 2 Likes
on
2 Posts
Re: PROJECT: Free Integra aka DirtyDA
^^ Hahah trust me, I know. PA roads are the worst. I'm gonna fab up a steel skid plate for it because a 3" downpipe isn't going to be any better lol
#711
Honda-Tech Member
Join Date: Sep 2010
Location: Pensacola, FL and every Court House in Louisiana
Posts: 3,114
Likes: 0
Received 2 Likes
on
2 Posts
Re: PROJECT: Free Integra aka DirtyDA
Looks like it is coming along nicely! Sucks your cars not even on the road and its already getting hit. I know how you feel, my neighbor backed into my truck 2 days ago and did 2400 worth of damage.
The header does hang pretty low. I was worried about that with my hytech replica(not big tube). I lucked out though because I found out after I bought it, PLM was the better fitting replica. It fits nice and tight against the oil pan. It is about a 1-1.5" below the lowest part of my bumper but it is a eg6. I could measure it next week when I get home and let you know if it might give give you better clearance.
I got the last of my parts to finish my exhaust today so I cant wait to get home, finish the swap up and finally drive it. It has been since Sept, last year since it has been on the streets.
The header does hang pretty low. I was worried about that with my hytech replica(not big tube). I lucked out though because I found out after I bought it, PLM was the better fitting replica. It fits nice and tight against the oil pan. It is about a 1-1.5" below the lowest part of my bumper but it is a eg6. I could measure it next week when I get home and let you know if it might give give you better clearance.
I got the last of my parts to finish my exhaust today so I cant wait to get home, finish the swap up and finally drive it. It has been since Sept, last year since it has been on the streets.
#712
Honda-Tech Member
Thread Starter
Join Date: May 2010
Location: Suburbs of Philadelphia
Posts: 3,706
Likes: 0
Received 2 Likes
on
2 Posts
Re: PROJECT: Free Integra aka DirtyDA
^^ god I know how you feel, I have had this for over a year and haven't been able to drive it lol. What else do you have to do to finish the swap? That would be greatly appreciated if you could measure that for me. I would love to have a PLM, they are probably the best replica company out there. But this is only a temporary thing until I finish building the LSV-T.
Did your neighbor pay for the damage?
Did your neighbor pay for the damage?
#713
Honda-Tech Member
Thread Starter
Join Date: May 2010
Location: Suburbs of Philadelphia
Posts: 3,706
Likes: 0
Received 2 Likes
on
2 Posts
Re: PROJECT: Free Integra aka DirtyDA
My newest purchases for the teggy!! For my home toolbox.
Blue-Point 1/4" set
Snap-On 1/4" flex-head soft-grip and 3/8" soft-grip
Blue-Point electronic gauge tire inflator
Snap-on screw driver set, came with bottle opener
Blue-point ear-plugs for when I'm using the air tools.
And a Snap-on mechanics belt so I don't scratch the teg when I'm working on her!!!
What my impact socket drawer looks like now
The new arrangement of my cart
Blue-Point 1/4" set
Snap-On 1/4" flex-head soft-grip and 3/8" soft-grip
Blue-Point electronic gauge tire inflator
Snap-on screw driver set, came with bottle opener
Blue-point ear-plugs for when I'm using the air tools.
And a Snap-on mechanics belt so I don't scratch the teg when I'm working on her!!!
What my impact socket drawer looks like now
The new arrangement of my cart
#716
Honda-Tech Member
Join Date: Sep 2010
Location: Pensacola, FL and every Court House in Louisiana
Posts: 3,114
Likes: 0
Received 2 Likes
on
2 Posts
Re: PROJECT: Free Integra aka DirtyDA
^^ god I know how you feel, I have had this for over a year and haven't been able to drive it lol. What else do you have to do to finish the swap? That would be greatly appreciated if you could measure that for me. I would love to have a PLM, they are probably the best replica company out there. But this is only a temporary thing until I finish building the LSV-T.
Did your neighbor pay for the damage?
Did your neighbor pay for the damage?
#717
Honda-Tech Member
Join Date: Sep 2010
Location: Pensacola, FL and every Court House in Louisiana
Posts: 3,114
Likes: 0
Received 2 Likes
on
2 Posts
Re: PROJECT: Free Integra aka DirtyDA
Here you go. The header is 17.75" from the top of the tube to the bottom of the tube.
PLM hytech replica header has decent clearance. IMO. 4"
All pic were taken from the ground.
PLM hytech replica header has decent clearance. IMO. 4"
All pic were taken from the ground.
#720
Honda-Tech Member
Thread Starter
Join Date: May 2010
Location: Suburbs of Philadelphia
Posts: 3,706
Likes: 0
Received 2 Likes
on
2 Posts
Re: PROJECT: Free Integra aka DirtyDA
^^ haha I've realized that, luckily I have a second photobucket account so I will just be using that from now on...
@ Speedjunkie, what kind of header is that? I really like that, and I really like your engine bay Clearance doesn't seem too bad on that.
@ standy, Good choice
@ Speedjunkie, what kind of header is that? I really like that, and I really like your engine bay Clearance doesn't seem too bad on that.
@ standy, Good choice
#721
Honda-Tech Member
Join Date: Sep 2010
Location: Pensacola, FL and every Court House in Louisiana
Posts: 3,114
Likes: 0
Received 2 Likes
on
2 Posts
Re: PROJECT: Free Integra aka DirtyDA
This is PLM's ebay site. It is the small tube hytech replica.
http://www.ebay.com/sch/pipi_outlet/...&_trksid=p3686
I spent more time trying to clean that engine bay than the entire swap. Thanks!!
#722
Honda-Tech Member
Join Date: Mar 2012
Location: el paso, tx
Posts: 726
Likes: 0
Received 0 Likes
on
0 Posts
Re: PROJECT: Free Integra aka DirtyDA
This is PLM's ebay site. It is the small tube hytech replica.
http://www.ebay.com/sch/pipi_outlet/...&_trksid=p3686
I spent more time trying to clean that engine bay than the entire swap. Thanks!!
http://www.ebay.com/sch/pipi_outlet/...&_trksid=p3686
I spent more time trying to clean that engine bay than the entire swap. Thanks!!
#723
Honda-Tech Member
Join Date: Sep 2010
Location: Pensacola, FL and every Court House in Louisiana
Posts: 3,114
Likes: 0
Received 2 Likes
on
2 Posts
Re: PROJECT: Free Integra aka DirtyDA
And they are a vendor on here...
https://honda-tech.com/forums/performance-45/private-label-mfg-power-driven-headers-h-b-k-series-2472056/
https://honda-tech.com/forums/performance-45/private-label-mfg-power-driven-headers-h-b-k-series-2472056/
#724
Honda-Tech Member
Thread Starter
Join Date: May 2010
Location: Suburbs of Philadelphia
Posts: 3,706
Likes: 0
Received 2 Likes
on
2 Posts
Re: PROJECT: Free Integra aka DirtyDA
Just picked this up today! Replacing my other one at work so I can bring it home
This is the higher end one (more powerful than the one I had already), it also uses a Lithium battery, which also has LED lights to tell you how much battery power is left.
You can see the old one far left. That's now my home one so I don't have to drag out the air compressor and wait for it to fill up!!! YESSS!
This is the higher end one (more powerful than the one I had already), it also uses a Lithium battery, which also has LED lights to tell you how much battery power is left.
You can see the old one far left. That's now my home one so I don't have to drag out the air compressor and wait for it to fill up!!! YESSS!