post integra drag times
#7
Re: post integra drag times (jdmintegralsvtec)
1991 DA integra
mod list:
stock LS motor with crower dual valve spring and retainer with 404 crower cams.
Drag turbo setup boosting .7 bar
hi flow cat and HKS hi power exhaust
14.02 at 103 mph at Sacramento Race Way 2004 with blown piston ringslands. Pressure and little oil was blowing out the valve cover breather hole. I don't have the timeslip nomore.
mod list:
stock LS motor with crower dual valve spring and retainer with 404 crower cams.
Drag turbo setup boosting .7 bar
hi flow cat and HKS hi power exhaust
14.02 at 103 mph at Sacramento Race Way 2004 with blown piston ringslands. Pressure and little oil was blowing out the valve cover breather hole. I don't have the timeslip nomore.
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Jun 2006
Location: Medford, Oregon, United States
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
Re: post integra drag times (BOOSTED RIVAL)
I have the crower stage 2 turbo cams are those the same as the 404's. i don't recognize them by the number name.
#12
Junior Member
Join Date: Nov 2004
Location: Plattsburgh, NY, United States
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Re: post integra drag times (BOOSTED RIVAL)
1995 Integra RS
Gutted interior
Stock LS motor
Only alternator running off crank
Ractive 4-2-1 header
test pipe
Thermal 2.5" catback
Custom ram air through headlight hole
Holley plug wires
15.1@93
Gutted interior
Stock LS motor
Only alternator running off crank
Ractive 4-2-1 header
test pipe
Thermal 2.5" catback
Custom ram air through headlight hole
Holley plug wires
15.1@93
#13
Honda-Tech Member
Join Date: Jul 2004
Location: Hill town, TN, USA
Posts: 4,860
Likes: 0
Received 0 Likes
on
0 Posts
Re: post integra drag times (Burntrubber87)
90 DA RS
B16A Y1 tranny PR3 ecu (Fresh Hmotoronline.com swap)
CAI
Megan Racing Header
Magna Flow Exhuast
6 Puck Stage 3 clutch
ES Motor Mount inserts (W new mounts)
Tokico shocks and coilovers (helps with launch)
Yoko rubbber on front,
Falken rubber on rear
Fronts at 20PSI
ANd some other crap I cant remember,
Best time out of 5 runs.....
16.9 1/4
trap 80MPH
Needless to say I was having problems that night
Vtec wouldnt engage, timing was off. Yeah I was pissed
got it all fixed and hoping for 14.7 (friend w/same swap ran 14.8)
B16A Y1 tranny PR3 ecu (Fresh Hmotoronline.com swap)
CAI
Megan Racing Header
Magna Flow Exhuast
6 Puck Stage 3 clutch
ES Motor Mount inserts (W new mounts)
Tokico shocks and coilovers (helps with launch)
Yoko rubbber on front,
Falken rubber on rear
Fronts at 20PSI
ANd some other crap I cant remember,
Best time out of 5 runs.....
16.9 1/4
trap 80MPH
Needless to say I was having problems that night
Vtec wouldnt engage, timing was off. Yeah I was pissed
got it all fixed and hoping for 14.7 (friend w/same swap ran 14.8)
#14
Honda-Tech Member
iTrader: (1)
Join Date: Nov 2001
Location: Newark/Bay Area, CA., USA
Posts: 12,453
Likes: 0
Received 1 Like
on
1 Post
Re: post integra drag times (Jose-aka-Pedro)
1994 Integra GSR
(aprox 167k miles at the time I went to the track)
Mods during that time:
AEM CAI
Skunk2 IM
CTR intake cam
Skunk2 cam gears
DC 4-2-1 ss header
Custom Test Pipe
Greddy SP catback system
My custom chipped p28 ecu
was on street tires, full interior and spare still in the car. Anyways, I ran a 14.55
(aprox 167k miles at the time I went to the track)
Mods during that time:
AEM CAI
Skunk2 IM
CTR intake cam
Skunk2 cam gears
DC 4-2-1 ss header
Custom Test Pipe
Greddy SP catback system
My custom chipped p28 ecu
was on street tires, full interior and spare still in the car. Anyways, I ran a 14.55
#16
Is Partying at your House
Join Date: Jun 2006
Location: Bay Area, Ca, USA
Posts: 1,323
Likes: 0
Received 0 Likes
on
0 Posts
Re: (numbnuts22715)
1997 Acura Integra LS Adriatic Blue Pearl
106,000 miles
Aem CAI
DC Sports Header
DC Sports Catback
Stock Cat
GSR transmission
Full Systen 2 Alpine ZR12's
Full Interior
15.6@90
106,000 miles
Aem CAI
DC Sports Header
DC Sports Catback
Stock Cat
GSR transmission
Full Systen 2 Alpine ZR12's
Full Interior
15.6@90
#17
Re: (Dc4iNtEgRa)
Last years setup:
11.96@114 w/1.98 60'
B18c1 stock w/cp pistons/eagle rods, t3/t04e 325 whp mustang dyno #, open diff, and 22" slicks (too small). Car normally trapped 119-120 when it went 12.1's..
This years setup is just being finished, hoping to make 550 whp
11.96@114 w/1.98 60'
B18c1 stock w/cp pistons/eagle rods, t3/t04e 325 whp mustang dyno #, open diff, and 22" slicks (too small). Car normally trapped 119-120 when it went 12.1's..
This years setup is just being finished, hoping to make 550 whp
#18
Re: (slowteg550)
im gonna be building a daily driven DC soon
heres a local kids times and info:
99 GSR coupe
aem cold air intake
skunk 2 intake manifold
ctr in/ex cams
vibrant 4-2-1 header, 2.5 collector
2.5 test pipe
2.5 skunk 2 catback
act clutch
act flywheel
obd2-obd1 conversion harness
skunk 2 chipped P28
he ran a 14.5 on 15" avs es 100's
im looking to break into mid 13's with my DC build then ill be happy with my daily driver
heres a local kids times and info:
99 GSR coupe
aem cold air intake
skunk 2 intake manifold
ctr in/ex cams
vibrant 4-2-1 header, 2.5 collector
2.5 test pipe
2.5 skunk 2 catback
act clutch
act flywheel
obd2-obd1 conversion harness
skunk 2 chipped P28
he ran a 14.5 on 15" avs es 100's
im looking to break into mid 13's with my DC build then ill be happy with my daily driver
#19
Honda-Tech Member
Join Date: Jun 2006
Location: denver, co, usa
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Re: post integra drag times (jdmintegralsvtec)
90 integra.ls. fully build motor, from top to bottom. up to date time is a 15.5. with the motor lifting the head gasket, its turbo charged t3-t04x, but finaly got motor rebuild 4 the 5th time. motor runs good but still havent ran car yet. oh yea its also raced in the rocky mountains. mile high.
#20
Honda-Tech Member
Join Date: Jun 2003
Location: Leeds, AL, USA
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
1994 Acura Integra GSR Sedan
2001 JDM ITR Motor Swap
LS Transmission w/ Quaife LSD
AEM Short Ram Intake
DC Sport JDM 4-1 Header
2.5" to 3" Stepper Test Pipe
3" Thermal Turbo Exhaust
Hondata S200 ECU
ACT 6 Puck Unsprung Clutch w/ HD Pressure Plate
Fidanza Aluminium Flywheel
17" Tenzo R Formula 10 (Poor Man CE28Ns)
BFGoodrich Scorchers 205/40R17
Best passes:
1/8 E.T.: 8.93
1/8MPH: 83.7
1/4 E.T.: 14.0
1/4MPH: 99.8
Not too bad for street tires with 2.2-2.5 60' times
2001 JDM ITR Motor Swap
LS Transmission w/ Quaife LSD
AEM Short Ram Intake
DC Sport JDM 4-1 Header
2.5" to 3" Stepper Test Pipe
3" Thermal Turbo Exhaust
Hondata S200 ECU
ACT 6 Puck Unsprung Clutch w/ HD Pressure Plate
Fidanza Aluminium Flywheel
17" Tenzo R Formula 10 (Poor Man CE28Ns)
BFGoodrich Scorchers 205/40R17
Best passes:
1/8 E.T.: 8.93
1/8MPH: 83.7
1/4 E.T.: 14.0
1/4MPH: 99.8
Not too bad for street tires with 2.2-2.5 60' times
#21
I requested a short story for a title.
Re: (FourDoorTypeR)
the price was the same to race or whatch so i had them put some numbers on it and i ran it once,
1991 integra RS
intake
exhaust
b18a1 about 193 on it when raced.
17.725@78.69
1991 integra RS
intake
exhaust
b18a1 about 193 on it when raced.
17.725@78.69
#22
Honda-Tech Member
Join Date: Jul 2005
Location: Port Washington, Wi, United States
Posts: 1,083
Likes: 0
Received 0 Likes
on
0 Posts
Re: (FourDoorTypeR)
1994 Integra RS
stripped interior
cai intake
DC header
2.5" test pipe
2.5" cat back exhaust
14" steelies w/ Dayton Daytona's
2.331 60'
15.239 1/4 mile
91.81 mph trap speed
bad launch and running hot
stripped interior
cai intake
DC header
2.5" test pipe
2.5" cat back exhaust
14" steelies w/ Dayton Daytona's
2.331 60'
15.239 1/4 mile
91.81 mph trap speed
bad launch and running hot
#23
Re: (stewmasterk)
97 integra ls
stock motor
t3/t04e 8 psi
quaife lsd
3" full exhaust no cat
tuned on crome by me
Never been to 1/4 mile,
best time on slicks (before i broke a bunch of **** and with an open diff): 8.7 1/8th mile, 1.8 60ft
best time on street tires (lsd): 9.1 with a 2.0 60 ft
stock motor
t3/t04e 8 psi
quaife lsd
3" full exhaust no cat
tuned on crome by me
Never been to 1/4 mile,
best time on slicks (before i broke a bunch of **** and with an open diff): 8.7 1/8th mile, 1.8 60ft
best time on street tires (lsd): 9.1 with a 2.0 60 ft
#24
Re: (FourDoorTypeR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FourDoorTypeR »</TD></TR><TR><TD CLASS="quote">1994 Acura Integra GSR Sedan
2001 JDM ITR Motor Swap
LS Transmission w/ Quaife LSD
AEM Short Ram Intake
DC Sport JDM 4-1 Header
2.5" to 3" Stepper Test Pipe
3" Thermal Turbo Exhaust
Hondata S200 ECU
ACT 6 Puck Unsprung Clutch w/ HD Pressure Plate
Fidanza Aluminium Flywheel
17" Tenzo R Formula 10 (Poor Man CE28Ns)
BFGoodrich Scorchers 205/40R17
Best passes:
1/8 E.T.: 8.93
1/8MPH: 83.7
1/4 E.T.: 14.0
1/4MPH: 99.8
Not too bad for street tires with 2.2-2.5 60' times </TD></TR></TABLE>
Why you running an LS trans with an ITR motor? Why you running a 3" exhaust on an NA motor? And last but not least, WHY 17" wheels?
2001 JDM ITR Motor Swap
LS Transmission w/ Quaife LSD
AEM Short Ram Intake
DC Sport JDM 4-1 Header
2.5" to 3" Stepper Test Pipe
3" Thermal Turbo Exhaust
Hondata S200 ECU
ACT 6 Puck Unsprung Clutch w/ HD Pressure Plate
Fidanza Aluminium Flywheel
17" Tenzo R Formula 10 (Poor Man CE28Ns)
BFGoodrich Scorchers 205/40R17
Best passes:
1/8 E.T.: 8.93
1/8MPH: 83.7
1/4 E.T.: 14.0
1/4MPH: 99.8
Not too bad for street tires with 2.2-2.5 60' times </TD></TR></TABLE>
Why you running an LS trans with an ITR motor? Why you running a 3" exhaust on an NA motor? And last but not least, WHY 17" wheels?
#25
Honda-Tech Member
iTrader: (1)
Join Date: Nov 2001
Location: Newark/Bay Area, CA., USA
Posts: 12,453
Likes: 0
Received 1 Like
on
1 Post
Re: (DC4_MADMAN)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DC4_MADMAN »</TD></TR><TR><TD CLASS="quote">
Why you running an LS trans with an ITR motor? Why you running a 3" exhaust on an NA motor? And last but not least, WHY 17" wheels?</TD></TR></TABLE>
I also find that you running a 14 flat with that set up hard to believe. LS gears are longer than the gsr/itr/b16a gears. 17" wheels slow you down as well. 3" exhaust on a mildly built motor is an overkill since you need some type of backpressure. If you were turbo'd, then I'd understand......please explain
Why you running an LS trans with an ITR motor? Why you running a 3" exhaust on an NA motor? And last but not least, WHY 17" wheels?</TD></TR></TABLE>
I also find that you running a 14 flat with that set up hard to believe. LS gears are longer than the gsr/itr/b16a gears. 17" wheels slow you down as well. 3" exhaust on a mildly built motor is an overkill since you need some type of backpressure. If you were turbo'd, then I'd understand......please explain