Is it possible to integrate LED into the gauge cluster??
#1
Thread Starter
Join Date: Jul 2002
Location: NiteTown, NY, USA
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Is it possible to integrate LED into the gauge cluster??
I've replaced the 194 bulbs behind the gauge cluster...yes, it's hot!!
but one of the shift indicating light burnt out...
the bulbs are pretty small, is it possible to use maybe 3mm LED to replace those bulbs??
but one of the shift indicating light burnt out...
the bulbs are pretty small, is it possible to use maybe 3mm LED to replace those bulbs??
#2
Honda-Tech Member
Join Date: Dec 2001
Location: Altadena, CA, USA
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
Re: Is it possible to integrate LED into the gauge cluster?? (niteboyzzz)
yes you can with the right resistors or you can buy some leds set up to be used in those sockets. Search for custom gauge cluster stuff. Someone on ht has those leds in his cluster. I think they are red.
[Modified by erniecars, 10:36 AM 9/10/2002]
[Modified by erniecars, 10:36 AM 9/10/2002]
#3
Honda-Tech Member
Join Date: Jul 2002
Location: Hollywood, CA, US
Posts: 2,257
Likes: 0
Received 0 Likes
on
0 Posts
Re: Is it possible to integrate LED into the gauge cluster?? (erniecars)
yes you can with the right resistors or you can buy some leds set up to be used in those sockets. Search for custom gauge cluster stuff. Someone on ht has those leds in his cluster. I think they are red.
[Modified by erniecars, 10:36 AM 9/10/2002]
[Modified by erniecars, 10:36 AM 9/10/2002]
#4
Thread Starter
Join Date: Jul 2002
Location: NiteTown, NY, USA
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Re: Is it possible to integrate LED into the gauge cluster?? (erniecars)
great, I'll try to replace those borng bulbs with bright LEDs...
wiring LEDs can be a pain, since every one need its own resistor...
and somehow I need to figure out how to hook'em up to get power the right way...
bright LEDs are hot!!!
thanks!!
wiring LEDs can be a pain, since every one need its own resistor...
and somehow I need to figure out how to hook'em up to get power the right way...
bright LEDs are hot!!!
thanks!!
#6
Thread Starter
Join Date: Jul 2002
Location: NiteTown, NY, USA
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Re: Is it possible to integrate LED into the gauge cluster?? (FD3S)
correct me if I'm wrong, but the indicator lights don't use 194/168 bulbs, they're much smaller...I think only the dealers have them...
Thread
Thread Starter
Forum
Replies
Last Post
CrazyHondaBoy
Acura Integra Type-R
2
07-06-2002 10:53 PM