jweezy225

hah just jdm'ed out my cluster and you can do it too! just get yellow paint, paint brush, and '194 amber' bulbs hehe

well... here are the final results (downside for me is that the RPM and speedometer needles dont move... well speedometer does after goin 10 mph... but RPMS were working but stopped... hopefully they will fix themselves)

some pics!

debogsr

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jweezy225 &raquo;</TD></TR><TR><TD CLASS="quote">

well... here are the final results (downside for me is that the RPM and speedometer needles dont move... well speedometer does after goin 10 mph... but RPMS were working but stopped... hopefully they will fix themselves)
</TD></TR></TABLE>
lol why would you want your needles not to work?

mansu

so its jdm color... but uhm it's still not kilometers... if yer speedo is not workin properly you must have pulled on the cable in the back, you can either get it recalibrated but doubt it's going to fix itself... the rpms is connected to a plug, if its not working chances are it's not fully plugged in...

jweezy225

it was a mistake i think on my part... i dunno wut i did tho just unplugged and replugged... no clue why its happening

SMZ GSR

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jweezy225 &raquo;</TD></TR><TR><TD CLASS="quote">it was a mistake i think on my part... i dunno wut i did tho just unplugged and replugged... no clue why its happening</TD></TR></TABLE>
One of the reason why I avoid all this DIY "JDM" mods. Should've just bought an ITR cluster, not expensive at all (usually under $175)

xAznRac3rx02

umm... ur needles not workign is definitely not a good thing

You didnt break the needles did u?

jweezy225

nah, didnt break the needles cuz the speedometer works after ur goin like 10 mph... and the RPMS were working dunno y it stopped... mayb the paint on the needles is too heavy? sticking to the thing the needle rests on?

xAznRac3rx02

yea... maybe the thing is sticking to something... have u tried opening it up again and trying to figure it out? I dont think its cuz the needles are too heavy (depends on how many coats u put)

CNSK

DO NOT REMOVE NEEDLE FROM CLUSTER it will stop working properly....I did same thing like how you did yours....my temp was across the overheating line, rpm needle didnt move, mph started at 40, the only thing working was gas. Im looking for a LS cluster....someone have one...pm me...thanks

xAznRac3rx02

okay... so if you're not supposed to move the needles from the cluster, then how are you supposed to spray paint it?? Do you just have to tape up all the stuff behind it first?

jweezy225

i never removed my needles, i just put cardboard pieces behind each needle i was going to paint.... mph is working perfectly now... just still same problem wit the rpm guage... i will try n look at it tomorrow, if everything comes out perfect tomorrow then i think its a nice mod if your bored... or just got a stock car or something

Mythias

.water

looking good man..i like it..buti heard that if u move that needle little up or down...it get Foked up....hope that work....check ur wire again...just in case..

kuja

removing the needles isn't the end of the world.. Are they dragging/sticking on the faces? Did u push them down too tight? When u put them back on, make sure the cluster is in your car all set to go. Turn the key on (just to ur lights come on, not the car) that way it 0's out the little pins where the needles go, then i usually line the needles up w/ the little pin sticking out @ the 0, and pop it back on. However, the temp, and gas guage may be a little trickier gj on the diy

4DooRGiSzer

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jweezy225 &raquo;</TD></TR><TR><TD CLASS="quote">
well... here are the final results (downside for me is that the RPM and speedometer needles dont move... well speedometer does after goin 10 mph... but RPMS were working but stopped... hopefully they will fix themselves)
</TD></TR></TABLE>

HAHA you dummy, NOT worth it, sorry

96civich22

thats so NOT jdm, have you even looked at one??? theres a lot of stuff on a jdm one that you DO NOT have , just becuase you have the "jdm color" doesnt mean its so jdm

jweezy225

yikes lol theres no love... my apologies for posting

the only thing mine doesnt have that the jdm one has is the km/hr and the different gas guage....

92redgsr

**** all these haters in here, its your car if you like it go for it. Im tired of all this JDM bullshit who cares if its JDM or not it his car hes the one who has to drive it not you. Who cares if its not authnetic JDM whats the big ******* deal you have parts on your car from Japan so that makes you cool. No it makes your car a LITTLE different from someone elses but it makes you a ******* dork when you try to put someone down because you think your the JDM king. To recap stop ******* hating cause its not what you would do. This was directed to the **** suckers in this thread that gave thumbs down and negative comments.

94gsrsedan

THAT WAS STUPID

jweezy225

if ya wanted to know, it was just paint sticking... fixed it
everything works fine

debogsr

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jweezy225 &raquo;</TD></TR><TR><TD CLASS="quote">if ya wanted to know, it was just paint sticking... fixed it
everything works fine </TD></TR></TABLE>
good, now i saw for the mod.

arw321

Doesn't look like a JDM ITR cluster at all to me. But, for attempting this, nonetheless.

Cliffjumper2

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 92redgsr &raquo;</TD></TR><TR><TD CLASS="quote">**** all these haters in here, its your car if you like it go for it. Im tired of all this JDM bullshit who cares if its JDM or not it his car hes the one who has to drive it not you. Who cares if its not authnetic JDM whats the big ******* deal you have parts on your car from Japan so that makes you cool. No it makes your car a LITTLE different from someone elses but it makes you a ******* dork when you try to put someone down because you think your the JDM king. To recap stop ******* hating cause its not what you would do. This was directed to the **** suckers in this thread that gave thumbs down and negative comments.</TD></TR></TABLE>

he's the one that said he made a jdm itr cluster, people are just responding to it. Maybe he would've gotten a better response in the appearence forum on this paticular mod. Or maybe he could've never used the letter jdm, and just said I painted my needles yellow and added amber lights.......cause that's all he did

jweezy, get my switches for your JDM folding mirrors, and you'll really be looking JDM y0 ............ j/k

EH2_pReStO

haha..Can' believe you broke you RPM gauge...its now useless no matter what cool color it is..sighz....gheyness..

aeon

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by prestoizm &raquo;</TD></TR><TR><TD CLASS="quote">haha..Can' believe you broke you RPM gauge...its now useless no matter what cool color it is..sighz....gheyness..</TD></TR></TABLE>

if you read a few posts above you, you would see that he figured out why the rpm gauge wasn't moving, it was just paint sticking. Now everything is working fine.

You did a good job man, even though it's not authentic, it looks cool. Should have just used a little paint brush and some of that detail modeling paint from any craft/hobby store. There was a diy article over at Team-integra.net on this also. might want to check it out if someone else decides to do this. do a search because it's not in the article section though.