Just installed SpFab (spoolinperformance) chromoly traction bar!
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: East Bay, CA, USA
Posts: 1,524
Likes: 0
Received 0 Likes
on
0 Posts
Just installed SpFab (spoolinperformance) chromoly traction bar!
I picked this up from Phil a couple days ago and installed it tonight. Check out the pics...
From the front. Ground clearance is great, alot more than I expected. They did not hit the speed bump going into my apartment complex
Drivers side radius rod...The rods are billet instead of hollow tubes like other traction bar out there. They did not clear my hacked up intercooler piping but it was a good excuse to redo it. Now it clears!
Passenger side...
Another front view...
I forgot to take a picture of the bar brackets so I am using one of Phil's pictures...
In the pic above you can see the through hole design of the bracket so you know its not just going to get yanked off! The intergrated tow hook is a big plus too! Looks great in powdercoat black and most importantly they are strong. I cant wait to tear up the streets.
Heres a pic of the car they are in!
Contact Phil (projectDC2) on here to pick one up or if you have any questions. These are made in-house by him so you know he will back up his work
From the front. Ground clearance is great, alot more than I expected. They did not hit the speed bump going into my apartment complex
Drivers side radius rod...The rods are billet instead of hollow tubes like other traction bar out there. They did not clear my hacked up intercooler piping but it was a good excuse to redo it. Now it clears!
Passenger side...
Another front view...
I forgot to take a picture of the bar brackets so I am using one of Phil's pictures...
In the pic above you can see the through hole design of the bracket so you know its not just going to get yanked off! The intergrated tow hook is a big plus too! Looks great in powdercoat black and most importantly they are strong. I cant wait to tear up the streets.
Heres a pic of the car they are in!
Contact Phil (projectDC2) on here to pick one up or if you have any questions. These are made in-house by him so you know he will back up his work
#5
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: East Bay, CA, USA
Posts: 1,524
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just installed SpFab (Lu DC2)
I am going to put in new suspension tonight. Koni yellows and ground control combo to stiffen the ride up some. The car feels very unstable and spinning all third gear does not help at all either. Gets kinda scary when it starts pulling and wants to go all over the road. I'll take it down the block a couple times and see how everything feels after the rest of the suspension is in.
Trending Topics
#9
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: East Bay, CA, USA
Posts: 1,524
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Outkast95LS)
I definately feel the difference! I took the car out for a spin yesterday and its a lot more stable when making hard pulls. I am not scared to smash on it anymore! LOL
Thread
Thread Starter
Forum
Replies
Last Post