How to tell that Motor mount is bad?
10-22-2014, 11:03 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2014
Location: San Diego, CA
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
How to tell that Motor mount is bad?
How can I determine if my drivers top motor mount is bad?
I was replacing the torque mounts and pulled out the top drivers mount to check it out. The rubber has no tears but when it's installed it appears that the mount is off center in the frame. The bolts line up fine but the whole unit is tilted a small degree.
Is my mount still good? Do I wait until the rubber tears like other mounts?
I was replacing the torque mounts and pulled out the top drivers mount to check it out. The rubber has no tears but when it's installed it appears that the mount is off center in the frame. The bolts line up fine but the whole unit is tilted a small degree.
Is my mount still good? Do I wait until the rubber tears like other mounts?
10-24-2014, 05:55 AM
#2
Re: How to tell that Motor mount is bad?
Do you have any pictures?
How does it feel when you're shifting under load? Do you feel the shifter moving a bit, or any odd movements?
How does it feel when you're shifting under load? Do you feel the shifter moving a bit, or any odd movements?
10-24-2014, 06:29 AM
#3
Honda-Tech Member
Thread Starter
Join Date: Aug 2014
Location: San Diego, CA
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to tell that Motor mount is bad?
Sadly no pics. Shift feel was bad but all other mounts are pretty bad. Replacing the torque and rear now
11-03-2014, 08:41 AM
#4
Honda-Tech Member
iTrader: (1)
Join Date: Aug 2003
Location: Left Coast : High Altitude, Top Floor
Posts: 7,616
Likes: 0
Received 1 Like
on
1 Post
Re: How to tell that Motor mount is bad?
If all the other mounts were bad, I'd suspect the drivers is worn and should be replaced. Why change only 3 mounts?
Thread
Thread Starter
Forum
Replies
Last Post
JaguarS4R
Honda Civic (2001 - 2005)
7
02-20-2010 06:00 AM
vlc92189
Honda Civic / Del Sol (1992 - 2000)
3
03-25-2007 08:19 PM