HELP! car won't start, recent mods= lightened flywheel, ACT clutch
#1
Thread Starter
Join Date: Sep 2003
Location: somewhere in the us
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
HELP! car won't start, recent mods= lightened flywheel, ACT clutch
I recently installed a 9lb. lightened aluminum flywheel and an ACT organic street clutch. Also installed a skunk 2 short throw dual bend shifter. I had the clutch installed and it's been two weeks and my GSR ran awesome. Oh yeah, I have a GSR with JRSC on it running 6psi. So recently I didn't start my car until three days after a heavy snow storm. My car was covered in snow, I just let it sit and drove my truck. Well, after being lazy and not uncovering my car and then trying to start it, no luck. Any way, before the clutch install it would always start. Except from time to time the starter would just make a click sound, like once or twice, but then it would start. The blower has been on my 2000 GSR for about 2 years now and 40,000 mi. I am running stock injectors. I just changed my fuel filter and put on a new cap and rotor. Still doesn't start. I need to check for spark still, shoulda did that first. But here's the situation, the car cranks. Just cranks and cranks but no start! Is it my ignition coil? Plugs? (i need to check 'em) I am running 1 degree colder plugs, they are NGK platinum BKRE711 plugs suggested by Jackson Racing. I put them in when I installed the JRSC.
Thread
Thread Starter
Forum
Replies
Last Post