Gasket issues
#1
Honda-Tech Member
Thread Starter
Join Date: May 2012
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
Gasket issues
I have a skunk2 pro intake with 68mm throttle body. I have a gasket that I've been told is wrong and that it doesn't fit right and causes a leak so I looked on skunk2 website and found a gasket they said is for my throttle body so I made it from gasket material you can buy from autozone and the car starts with it idles at about 600 for a split second then dies. What's my issue. Pictures are gasket that leaks on throttle body, the throttle body and the gasket I copied
#2
Re: Gasket issues
The gasket shown on the throttle body doesn't match the one in the Skunk 2 screen shot.
Why wouldn't you just make a gasket that looks like the one in the Skunk 2 screen shot?
Why wouldn't you just make a gasket that looks like the one in the Skunk 2 screen shot?
Trending Topics
#9
Re: Gasket issues
if its running with the old gasket and not the new it is because the openings, you have 6 holes in the original gasket u made and from what u said with the first gasket you shown it looks like more ventilation for the u shape slit on bottem left and maybe that gasket u say was leaking is beacause on top of ur picutre there is an opening above the gasket. try make custom gasket with slits and holes
#10
Honda-Tech Member
Thread Starter
Join Date: May 2012
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
Re: Gasket issues
Well skunk2 said this is the gasket for the throttle body. I made one before this one it was basicaly identical to the one that doesn't fit and the car would do the same thing
#11
Honda-Tech Member
#14
Honda-Tech Member
Thread Starter
Join Date: May 2012
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
Re: Gasket issues
Thought about it still wanna talk to skunk to and make sure this is it because the only port on the intake is the iacv even tho I don't have one.
Thread
Thread Starter
Forum
Replies
Last Post