DA vs DC... What can and can’t i use ?
#1
DA vs DC... What can and can’t i use ?
Hi everyone, this is my first post and i’ve just picked up a DA9 integra. i am curious to know what spare parts are universal (if there is any) and what i will need to look for exclusively to the DA9.
i am not familiar with my cars so i’d appreciate all the insight i can get.
ill be looking to get new door trims, stock suspension and a muffler, just to name a couple.
i am not familiar with my cars so i’d appreciate all the insight i can get.
ill be looking to get new door trims, stock suspension and a muffler, just to name a couple.
#2
Honda-Tech Member
Re: DA vs DC... What can and can’t i use ?
Hi everyone, this is my first post and i’ve just picked up a DA9 integra. i am curious to know what spare parts are universal (if there is any) and what i will need to look for exclusively to the DA9.
i am not familiar with my cars so i’d appreciate all the insight i can get.
ill be looking to get new door trims, stock suspension and a muffler, just to name a couple.
i am not familiar with my cars so i’d appreciate all the insight i can get.
ill be looking to get new door trims, stock suspension and a muffler, just to name a couple.
The following users liked this post:
#3
Honda-Tech Member
Re: DA vs DC... What can and can’t i use ?
Suspension and shifter will definitely work. I moved the suspension and C's shifter from my old EF8 to my DC2 without any issues. DC and DA interior trim are quite different so you cannot make it fit without modding. The length of the exhaust is different so cutting/welding will needed to make it fit. DA is OBD0 while the DC2 is OBD1/2 so the OBD0 dizzy will need to be used with a B18C motor at the least if you are planning to keep the oBD0 harness.
The following users liked this post:
#5
Re: DA vs DC... What can and can’t i use ?
Suspension and shifter will definitely work. I moved the suspension and C's shifter from my old EF8 to my DC2 without any issues. DC and DA interior trim are quite different so you cannot make it fit without modding. The length of the exhaust is different so cutting/welding will needed to make it fit. DA is OBD0 while the DC2 is OBD1/2 so the OBD0 dizzy will need to be used with a B18C motor at the least if you are planning to keep the oBD0 harness.
Thread
Thread Starter
Forum
Replies
Last Post