DA Question: How do you remove driver side fender
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: Tacoma, Wa, USA
Posts: 241
Likes: 0
Received 0 Likes
on
0 Posts
DA Question: How do you remove driver side fender
I'm going to try and help install new door hinges on my brothers DA and Im not sure how to remove the fender to get to the hinges. Is it just unbolting all the bolts if so where are they located, if not what are the steps.
#2
Honda-Tech Member
Join Date: Jul 2008
Location: Rising Sun, MD, USA
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
Re: DA Question: How do you remove driver side fender
I think there are 6 or 7 bolts...sorry i dont have any pics. There are 2 or 3 under the hood. For the next 2 you actually have to open the drivers door. There is one under a little rubber thing at the top where the door and fender meet. Theres another inside opening you make when you open the door. Its about the same hieght as where the side moldings are. There is one underneath the car where you jack it up. And i believe there is one on the front of it like where the bumper is but i cant remember off hand.
#4
Honda-Tech Member
iTrader: (2)
Join Date: Feb 2007
Location: Repn 619
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
Re: DA Question: How do you remove driver side fender
Honestly removing the fender is pretty easy just take off the bolts that you can see then give the fender a tug and see where else its being held. Thats what i did and it went pretty smooth, don't worry about crazy hidden bolts cause there aren't any.
#5
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: Tacoma, Wa, USA
Posts: 241
Likes: 0
Received 0 Likes
on
0 Posts
Re: DA Question: How do you remove driver side fender
Thanks everyone I went ahead and did it this morning, went pretty easy just one bolt was tricky due to the bumper bracket on the fender being a pain the get off to get to the bolt behind it.
Thread
Thread Starter
Forum
Replies
Last Post