fluke83

I just got my car back today. A friend of mine painted it for me. I could hardly get the car home, it wouldn't run for ****. I had it at about 6 grand and it would hardley be moving. I took it to my mechanic who doesn't really work on imports that much and all he could tell me was pretty much that it sounded like only 3 cylinders were working most of the time. (lot of help...yunno) Any body have any advice. My friend said the only thing he did was unplug the battery and didn't touch anything else when he sprayed it.

thaiphob

did you make sure all your spark plug wires are tight?

fluke83

yeah, first thing i checked

i mean my mechanic didnt really know what to say so ..... what the ****?

Cliffjumper2

maybe your friend took it for a joy ride and burnt out your clutch or motor
no really, what are the symtoms?
Is it slipping, hesitating, etc....
check your air intake and exhaust, make sure there isn't any bad overspray; short of that, I don't see how a paint job would make your car run bad.
one more stupid suggestion: maybe he put several coats on, and the car just weighs more now......making it feel sluggish...........j/k
in all likelihood, it's just a coincidence, and your car needs a tuneup

bdkrma

"I took it to my mechanic who doesn't really work on imports that much"
Why's he "your" mechanic then??Maybe the car was running when it was painted and now theres paint clogging the filter? Your friend probably has the answer for you...not anyone in here

..::91TEG-G2::..

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bdkrma &raquo;</TD></TR><TR><TD CLASS="quote">"I took it to my mechanic who doesn't really work on imports that much"
Why's he "your" mechanic then??Maybe the car was running when it was painted and now theres paint clogging the filter? Your friend probably has the answer for you...not anyone in here</TD></TR></TABLE>


maybe works on the family's big blocks

SMZ GSR

How about taking it to a mechanic that knows imports?

fluke83

I live in small town West Virginia and I'd have to drive over 2 hrs to an import mechanic. The guy who painted my car is 20 years old same age as me and he's very unexperienced. Don't get me wrong he's good at painting but anything else with cars....ehhh. The idiot did spray my exhaust though could that have anything to do w/ the prob. I kinda don't want to drive 2 hrs in a car that hardly runs plus I'd like to let the car set in a my garage until I'm allowed to put a coat of wax on it. Before bugs are hitting it a 70mph.

Greenery18

Do a compression test and a leakdown test on your engine.

Muckman

iTrader: (2)

Maybe they painted the inside of your engine?

swanny

Masking paper in intake?

TurboTeG4

What I think is that your so called friend took it for a joy ride and cracked a piston etc. etc. , you should have been aware of you mileage. If you dropped it off fine and now its screwed your friend is holding something from you.

99REDGSR1

Thats what i think

99REDGSR1

I would also do a compression test

b18integraracer

i think you should clean your air filter and check the throttle body for any over spray or clogging because of the over spray. also check the cap and rotor.also check the spark plug wires, plugs.it could also be that you burned out the cylinder.go to a import mechanic

Teggsr2120

If he doesnt know what the hell he is doing maybe its not a smart idea to let him do it.

rwaggie

Go and check all of your grounds on the car and the engine bay. If he disconnected them and painted he either forgot to reconnect, or the paint layer is causing a poor connection.

Sack Master

I don't give a rats *** if your mechanic doesn't work on imports. If he is a mechanic he can at least diagnos possible problems. Maybe he doesn't understand how vtec works but that doesn't mean anything. If he is a mechanic that knows how fuel injected cars operate he can work on it. They are all basically the same. It is still an internal combustoin engine. If he has no clue how fuel injection, electronic ignition systems, or computer controlled cars in general work then you need to find a mechanic that is not stuck in the 1970s.

.water

the best thing u could do was remember what was ur mile on ur car....so after done paiting u can see someone was driving or not...dont u think??

Ti3d in

It's most likely the grounds.

speedracer9k

is there a CEL because your car runs like ****?

RallyRedGT-V6

aren't you supposed to wait like 2 months before you wax it?

i just got mine done professionally and he told me to wait at least 2

SIK IN DA HED

sounds like your friend is an ******* and is lyin to you. probably drove it around and mashed the heck out of it til it broke somethin.

slo2kgsr

I would definatly check the grounds first. Also, a friend of mine had his car painted and they covered his filter with overspray (he had a CAI) that also could be a problem.

xteg95

well if you think its running on only 3 cyliinders id take it somewhere or if you can do it yourself...have a compression tests done, best way to find out.