rexbooming

Ok guys heres the deal... I just put a gen 1 b16a SiR obd0 motor into my 91 acura integra. My car boggs down if you try to keep it at a constant mph. I am almost certian that the injectors are just blocked up. When kind of injectors should I be looking for. I just want something stock. Thanks for any info you guys can give me.

1998GsRIntegra

obd0 240cc honda injectors.

Padawan

Instead of replacing them, you can also simply have your existing injectors cleaned and flow-tested by someplace like WitchHunter Performance.

mouab18c1

iTrader: (5)

all B series injectors are 240cc

blammo98

Throw your ls injectors if you still got them in there thats what i did. Bought this 99 b16a2 off this kid that was acting shady when he sold it to me cause he thought the motor was bad. i rebuilt it and used the injectors that were on it and the were horribly clogged. took me almost 2 hours to figure out but it saved me about a thousand dollars on a fresh *** b16. then i was hitting vtec all night with the ls injectors, which have the same flow rate 240cc's